Texecom Premier Elite DT-W User manual

Technical Support : 91520 10269 : [e-mail]
Press 1234 on the control panel. The below message will be displayed.
Press Yes
Press any free zone number (eg: 089) to learn your DT PIR
Press reset button
When it starts learning you need press the learn button and then insert the
battery into the DT PIR
Premier Elite DT-W (GBF0007)
Battery
Press Yes till you reach zone type
Note: In this case
we’re learning
sensor in zone 89.

Technical Support : 91520 10269 : [e-mail]
Press Menu ( ) two times on the control panel and then press Yes to logoff
from your control panel
Caution: Do not change the zone
type & wiring type.
Frequently Asked Questions:
1. How to adjust the microwave range in the device?
Ans: The below image will give you an idea for finding the learn button.
2. What would be the maximum height should the PIR has to be placed & How
does it cover the distance?
Ans: The maximum height is 2mts & below image will give you an idea for height
& distance it covers.
Press Yes 7times to reach zone mode(wiring) make zone wiring as
“always awake”
Front View
Top View