Texecom Reflex User manual

3FALSE ALARM PROTECTION
Design: Noise reduction circuits with maximum ground plane.
RF Immunity: No false alarms from 80MHz to 1GHz at 50V/m,
equivalent to a 700W uniform transmitter at 3m (10ft).
Complies with BS EN 61000-4-3 : 1997.
Electrostatic Discharge: No false alarm up to 8kV.
Complies with BS EN 61000-4-2 : 1995.
Fast Transient Immunity: No false alarm up to ±1kV.
Complies with BS EN 61000-4-4 : 1995.
High Energy Transient
Immunity: No false alarm up to ±1kV.
Complies with BS EN 61000-4-5 : 1995.
Conducted RF
Susceptibility: No false alarms at 10Vrms.
Complies with BS EN 61000-4-6 : 1996.
Conducted Emissions: Complies with EN 55022 Class B.
Radiated Emissions: Complies with EN 55022 Class B.
EMC: Independently certified to EN 50130-4 : 1996.
Pulse Count: Adjustable Pulse Count. Internal link to select.
2ENVIRONMENTAL1PHYSICAL
4
8COVERAGE AT 2m7MOUNTING HEIGHT AND
SETTINGS
6ANGLING THE DETECTOR5COVERAGE AND PICK-UP

ALARM 12V 0V TAMPER
<24VDC 50mA, 18Ω (N/C)
<24VDC
50mA (N/C)
9-16VDC
10mA @ 12VDC
1.5m
(4'10")
2.5m
(8'4")
3.1m
(10'0")
2.0m
(6'7")
-35°C (-31°F) to +60°C (+140°F)
125g (4.5oz) approx.
-35°C (-31°F) to +55°C (+131°F)
63mm
(2.5”)
40mm
(1.6”)
90mm
(3.6”)
2.5mm (0.1”) ABS
0.3 - 3.0m/s
✓
QUALITY ASSURANCE
WARRANTY
10 year replacement warranty.
The Reflex is designed to detect the movement of an intruder and activate
an alarm control panel. As the Reflex is not a complete alarm system, but only a
part thereof, Texecom cannot accept responsibility or liability for any damages
whatsoever based on a claim that the Reflex failed to function correctly.
Due to our policy of continuous improvement Texecom reserves the right
to change specification without prior notice. All specifications are measured at
20˚C (68˚F).
Document Ref: REF/EU/1.0-7
©1994 - 2004 Texecom Ltd
Certificate Number: FM 35285
INS 156-4
LED ON
LED OFF
PULSE COUNT
12
3
www.texe.com
BEST
SELLING PIR
1 - 10ft/s
DO NOT TOUCH
✓
✓
FAST
NORMAL
SLOW
Passive Infrared Detector
INSTALLATION INSTRUCTIONS
www.texe.com
WINNER
THANK YOU FOR VOTING TEXECOM
Ask your distributor today for the new Texecom full colour Product Guide.

9LENS SELECTION 10 CHANGING LENSES 11 MOUNTING THE REFLEX
For indoor use only 12 MOUNTING THE REFLEX Mount on a stable surface
15 DETECTOR KNOCKOUTS14 CHOOSING A LOCATION
Avoid common false alarm sources
13 WIRING
Do not run cable parallel to mains wiring
16 CEILING MOUNT BRACKET
17 WALL MOUNT BRACKET
18 MOUNTING WITHOUT
BRACKETS
✗
✗
✗
✗✗
✗
✗
✗
✓
✗✓
✗✓
✓✗
✓
✗
Seal all holes
2
2413
13 4
6
5
6
LENS RETAINER
FACETS
LENS
See Mounting
Height Diagram
(Section 7)
INS 156-4