The Land of Nod Blake Storage Trundle User manual

WARNING
!
BLAKE
STORAGE TRUNDLE
• Do not place bed near windows where cords from blinds or drapes may strangle
a child.
• Do not place items with a string, cord, or ribbon around a child’s neck, such as
hood strings or pacifier cords
• Do not suspend strings over a bed for any reason
• The minimum age shall be no less than 15 months
• The intended mattress dimension on the bed is 71”L x 38”W x 5”H

BLAKE
STORAGE TRUNDLE
Made in Vietnam - r01 Page 1 of 3
HARDWARE
COMPONENTS
TOOLS REQUIRED
Thank you for purchasing the Blake Storage Trundle.
This page lists all the contents included in the box.
Please take the time to identify the hardware as well as
the individual components to this product. As you
unpack and prepare for assembly, place the contents on
a carpeted or padded area to protect them from
damage.
Note: 2 people are required to safely assemble this product.
Customer Service 800.933.9904 | Latest instructions available at www.landofnod.com
1
headboard and
footboard
corner
supports
A. Insert 4 wood dowels into 4 corner supports
as shown.
B. Insert 4 wood dowels into headboard and
footboard as shown.
phillips head screwdriver
allen wrench (included)
(We recommend the use of hand tools instead of power tools)
Missing hardware? Please call 800.933.9904 for replacements.
8 - screws 16 - small
bolts
8 - large
bolts
24 - wood
dowels
24 - flat
washers
24 - spring
washers
A
B
1 - footboard
1 - right side rail
1 - slat assembly
1- headboard
1 - left side rail
4 - corner
supports
(2 left, 2 right)
4 - brackets

BLAKE
STORAGE TRUNDLE
Made in Vietnam - r01 Page 2 of 3
Customer Service 800.933.9904 | Latest instructions available at www.landofnod.com
4
23
5
Fit dowels of corner supportsinto corresponding
holes of footboard and headboard as shown.
Secure each support with 1 large bolt, 1 spring
washer, and 1 flat washer, using a phillips head
screwdriver. Do not over tighten the bolts.
headboard
and footboard
NOTE: Do not
over tighten the
screws
bracket
Attach slat assembly to assembled unit with 8
large screws. Secure each screw with a
screwdriver. Make sure straps of slat assembly
are on facing the bottom as shown.
NOTE: It is important
to attach the slats to
the rails as shown
headboard and
footboard
NOTE: Make sure
wheels on each
corner support
are facing the
bottom as shown
NOTE: Do not
over tighten the
bolts
Attach 2 brackets to footboard and headboard
with 2 small bolts, 2 springs, and 2 flat washers
per bracket, using an allen wrench. Do not over
tighten the screws.
right side rail
left side rail
footboard
headboard
A
A. With the assistance of another adult, fit
dowels of headboard and footboard into
corresponding holes of left side rail as shown.
Secure each corner with 1 large bolt, 1 spring
washer, and 1 flat washer.
B. Attach each bracket of headboard and
footboard to left side rail with 2 small bolts, 2
spring washers, and 2 flat washers per bracket.
Repeat step 3 for right side rail.
B

BLAKE
STORAGE TRUNDLE
Made in Vietnam - r01 Page 3 of 3
Customer Service 800.933.9904 | Latest instructions available at www.landofnod.com
6
With the assistance of another adult, roll trundle
under Blake twin bed or full bed (sold separately).
Assembly is now complete.
trundle
Blake twin bed
or full bed
(sold separately)
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not use abrasive
cleaners. Do not use furniture wax or polish as the unit is finished
with a protective clear lacquer.