The World Models Manufacturing SUPER CHIPMUNK-EP User manual

Wing Span 39.5 in / 1000 mm
Wing Area
Flying Weight
Fuselage Length
25.5 oz / 720 g
260 sq in / 16.8 sq dm
32.0 in/810 mm
*Specifications are subject to change without notice.*
INSTRUCTION MANUAL
Specifications
Requires : 4 channel radio w/4 micro servos,
15A(8 cells) speed controller,
8 cells 1000 mAh battery & charger.
Speed 400 motor
Warning! This model is not a toy.
It is designed for maximum performance. Please seek advice if one is not familiar with this kind
of electric powered precision model. Operating this model without prior preparation may cause
injuries. Remember, safety is the most important thing. Always keep this instruction manual at
hand for quick reference.
FACTORY PRE-FABRICATED
ALMOST-READY-TO-FLY(ARF) SERIES
MADE IN CHINA
The World Models
Manufacturing Co., LTD.
www.theworldmodels.com
E2050504
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.c o m
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.c o m

P.1
P. 3 - 11
IND E X
BEFORE YOU BEGIN
PARTS LIST
ASSEMBLY
SAFETY PRECAUTIONS
P. 1
P. 2
P. 11
E2050504
Apply thread locker
Apply epoxy glue.
Pierce the shaded portion
coveringfilm.
Appl
(C.A.glue, super glue.)
y instant glue
Ensur
movement while assembling.
e smooth non-binding
Do not overlook this symbol !
Check all parts. If you find any defective or missing parts contact your local dealer. Please DRY FIT
and check for defects for all parts that will require CA or Epoxy for final assembly. Any parts you
find to be defective after the gluing process may be difficult to remove for warranty replacement. The
manufacturer will replace any defective parts, but will not extend to the parts that are good before
gluing to defective parts during assembly. Warranty will not cover any parts modified by customer.
BEFORE YOU BEGIN
Read through the manual before you begin, so you will have an overall idea of what to do.
Symbols used throughout this instruction manual comprise of the following : -
1
2
3
Assembl
sides the same way.
e left and right
Pee
covering film.
l off shaded portion
Drill holes with the specified
diameter(here:3mm).
Pay close attention here!
Cut off shaded portion.
Must be purchased separately !
Warning!
3mm
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.c o m
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.c o m

Parts list
P.2
COVERING:--
LIGHTEX SGX E205
LIGHTEX SGX 310 RED
LIGHTEX SGX 350 CORSAIR BLUE
LIGHTEX SGX 100 WHITE
1.MAIN WING--1 pair
2.PUSHROD Ø1.4X75mm w/Thresds(For Ai
leron)--2 pcs
STRAPER--2 pcs
SCREW PM2X12mm--4 pcs
CLEVIS--2 pcs
FUEL TUBE D4Xd2X4mm--4 pcs
HORN--2 sets
3.STABILIZER & ELEVATOR --1 set
FUSELAGE--1 pc.
4.
TAIL LANDING GEAR --1 set
SCREW PA2X8mm--2 pcs
VERTICAL FIN & RUDDER--1 set
5.PUSHROD Ø1.
4X430mm w/Threads(For --2 cs
Elevator) p
SCREW PM2X8mm--4 pcs
CLEVIS--2 pcs
FUEL TUBE D4Xd2X4mm--2 pcs
HORN--2 sets
6.PUSHROD Ø1.4X400mm w/Threads(For Rudder)--1
pc.
CLEVIS--1 pc.
SCREW PM 2X8mm--2 pcs
HORN--1 set
FUEL TUBE D4Xd2X4mm--1 pc.
7.SPEED 400 MOTOR--1
set
F1)
PLYWOOD ( 3X53.1X53.8mm--1 pc.
M2 NUT--2 pcs
SCREW PM2X12mm--4 pcs
WASHER d2XD5mm--2 pcs
GEARBOX--1 set
COWLING--1 pc.
SCREW PWA2X8mm--4 pcs
SPINNER Ø36mm--1 pc.
PROPELLER--1 set
7A.
M2 NUT--4 pcs
SCREW PM2X22mm--4 pcs
WASHER d2XD5mm--8 pcs
PLYWOOD (F1A)3X53.1X53.8mm--1 pc.
PLYWOOD (F1B)3X36X42mm--1 pc.
CARBON FIBER TUBE d3XD5X11mm--4 pcs
8.P USH ROD CO NNE CTOR --1 set
BAT TER Y TIE- -1 pc.
SPO NGE --1 pc .
DOU BLE -SID ED TA PE-- 1 pc.
FUE L TUBE D 4Xd 2X4m m-- 2 pcs
pc.
PUS HRO D Ø1.4X 80m m(Fo r Elevator
Servo )--1
STR APE R--2 p cs
9.S CRE W PM2. 5X2 0mm 2 pcs
--
WAS HER d2 .5X D8m m 2 pcs
--
10. MAI N LAND ING G EAR- -1 pc.
SCR EW PA2 .3X 12m m 4 pcs
--
COL LAR Ø2. 6mm w /set scr ew- -2 se ts
LAN DIN G WIRE S TRAP S 12X 27mm --2 pcs
MAI N WHEE L Ø40m m--2 pcs
11. CAM OPY --1
pc.
SCRE W PWA2 X8m m-- 4 pcs
P ILOT --1 p c.
12. DEC ALS --1 se t
E2050504
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.c o m
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.c o m

P.3
Aileron Servos
2
PM2x12mm Screw
4
Ø1mm pilot holes for World Models
tri-horn are pre-drilled. Please look
for pin-hole marks at under side of
control surfaces.
PM2x12mm
Pushrod
Clevis
2mm
Horn
Fuel Tube
Ø4x4mm
straper
1mm
Ø1.4x75mm
Bottom View
Main Wing
1
Apply instant type CA glue to both sides of each hinge.
Bottom View
Aileron Servo lead
E2050504
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.c o m
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.c o m

4
P.4
Vertical Fin/Rudder & Tail Landing gear
Stabilizer & Elevator
3
Temporary install the main wing, adjust leveling of
the stabilizer to make it as parallel to the main wing
as possible.
(Stabilizer)
(Main Wing)
B B'
B=B'
A=A'
AA'
Appl y i nstan t t ype CA glue to bo th sides of ea ch hinge.
Completed
Bottom View
PA2x8mm Screw
2
1mm
B
Apply instant type CA glue to both sides
of each hinge.
1.5mm
B'
B=B'
Completed
Plastic Collar
PA2x8mm
E2050504
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.c o m
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.c o m

Elevator Pushrod
5
PM2x8mm Screw
4
Ø1mm pilot holes for World Models tri-horn are pre-drilled. Please
look for pin-hole marks at under side of control surfaces.
P.5
Ø1.4x430mm
Pushrod
Rudder Pushrod
6
PM2x8mm Screw
2
Ø1mm pilot holes for World Models tri-horn arepre-drilled.
Please look for pin-hole marks at side of control surfaces.
Rudder Pushrod
Ø1.4x400mm
2 m m
PM2x8mm
Clevis
Fuel Tube
Ø4x4mm
Clevis
Bottom View
PM2x8mm
Clevis
Fuel Tube
Ø4x4mm
2mm
Horn
215mm
30mm
55mm
160mm
E2050504
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.c o m
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.c o m

P.6
Motor / Cowling
TO ALLOW FOR BACKLASH OF MATCHING GEAR,PUT A PIECE OF THIN PAPER
BETWEE N THE GEARS AND THEN TIGHTEN THE M2.6X7mm SCREWS. REMOVE
THE PAPER BE FORE FLYING.
7
PWA2 x 8mm Screw
4
1
M3x3mm Set Screw
PM2 x 12mm Screw
4
2
PA2.6 x 10mm Screw
M2 Nut
2
d2 x D5mm Washer
2
2
M2.6 x 7mm Sock Head Screw
Paper
Brushless motor/ Cowling
7A
1
M3x3mm
Set Screw
1.2x35mm
6
Steel Wire
5
PA2.6 x 10mm
Spinner
1.5mm
PWA2 x 8mm
7
2
M2.6 x 7mm
PM2 x 12mm
PM2 x 12mm
4
3
PM2 x 12mm
d2xD5mm
Washer
M2 Nut
Bottom View
53.1X53.8X3mm
F1
53.1X53.8X3mm
F1A
1
2
4
3
PM2 x 22mm
d2 x D5mm
Washer
M2 Nut
d2 x D5mm
Washer
Brushless motor
F1B
PM2 x 22mm Screw
4
d2 x D5mm Washer
8
M2 Nut
4
4
d3XD5X11mm
Ｃａ ｒｂｏｎ Ｆｉｂｅ ｒＴｕｂｅ
This step is for Geared
Speed 400 motor set up.
Please follow step 7A for
Direct Drive Brushless
motor set up.
This step is for
Direct Drive Brushless
motor set up.Please
follow step 7 for Geared
Speed 400 motor set up.
E2050504
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.c o m
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.c o m

Radio Equipment
8
Receiver wrapped up in sponge.
Main Wing
9
PM2.5x20mm
d2.5xD8mm
Washer
Bottom View
Front
P.7
Main Landing gear
10
PA2.3x12mm Screw
4
2.6mm Collar
2
PA2.3x12mm
Landing
wire straps
62mm
54mm
1.5mm
Bottom View
M3x3mm Set Screw
2.6mm Collar
Double-Sided Tape
Speed Control
Sponge
Rudder Servo
Elevator Servo
Fuel Tube
Ø4x4mm
Rudder Pushrd
Ø1.4x400mm
Front
Battery
Battery Tie
Straper
KA1.7x5mm
Elevator Pushrod
Ø1.4x80mm
Elevator Servo
2
PM2.5x20mm Screw
d2.5xD8mm Washer
2
E2050504
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.c o m
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.c o m

P.8
Canopy
11
PWA2x8mm Screw
4Front
1mm
Wing Setting
12
Adjust the wing and fuselage configuration as in the diagrams.
AA'
A=A' B=B' C=C'
B B'
C'
C
First insert the grommet to the canopy then apply screw.
PWA2x8mm
E2050504
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.c o m
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.c o m

P.9
Adjust the control throws as shown in the
diagram. These throws are good for general
flying. You can adjust according to your
personal preference.
Elevator
Important Safety Precautions
#First time flyer should never fly by himself/herself. Assistance from experienced flyer is
absolutely necessary.
#Pre-flight adjustment must be done before flying, it is very dangerous to fly a badly
pre-adjusted aircraft.
# Fun World EP is specially designed to be powered by .
#Make sure the air field is spacious, never fly the plane too close to people and never get
too close to a running propeller.
#If you find wrinkles on the covering as a result of weather changes, you can use hot iron
to remove the wrinkles. Please begin with lower temperature setting and gradually raise
the temperature until the wrinkles are gone. Too hot an iron may damage the covering.
#Check and re-tighten up all factory assembled screws, use thread locker if applicable.
geared speed 400 motor
Warning!
Control Throws
C.G.
14
Rudder
20mm
20mm
10mm
10mm
13
E2050504
65mm
C.G.
The ideal C.G. position is 65mm (2.56in.) behind
the leading edge measured at where the wing
meets the fuselage. In order to obtain the C.G.
specified, add weight to the fuselage or move
the battery position. Check the C.G. before
flying.
Aileron
8mm
8mm
2.56 in
Fun World EP
Fun World EP
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.c o m
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.c o m

E2050504
Product Registration Form (US Customers)
We would like to share with you any relevant information regarding your model, including
product news and free upgrade parts when applicable. Please fill in the following and send to
AirBorne Models, 4749-K, Bennett Drive, Livermore, CA 94551 USA.
1. Name:
2. Address:
3. Phone #: E-mail:
4. Model:
Wing QC# Fuselage QC#
(QC numbers are stamped on wing and fuselage)
5. Date of Purchase:
6. Store Name:
Please call AirBorne Models at 925 371 0922 for any assistance in filling this form.
Thank you very much for purchasing our product.
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.c o m
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.c o m

The World Models
Manufacturing Co., LTD.
www.theworldmodels .com
E2050504
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.com
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels. c om
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.c o m
The World Models
Manufacturing Co., LTD.
w w w. t heworldmodels.c o m