Theben LUNA 111 top3 AL User manual

1
LUNA 111 top3 AL, EL
1110130/1110230
LUNA 112 top3 AL, EL
1120130, 1120230
307528 01
Digital twilight
switch
EN
1. Basic safety information 4
2. Proper use 4
Disposal 4
3. Installation and connection5
Mounting the twilight switch 5
Connecting the cable 6
Disconnecting the cable 6
Connection/installation of
light sensor 7
4. Device description 10

2
Display & buttons 10
Operating instructions 11
Overview of navigation menu 12
Initial operation 12
5. Settings and functions 13
Set lux values 13
Set delay 14
Allocate sensors 15
Activating PIN code 15
Setting manual or permanent
switching 16
Set external input (only LUNA
111 top3) 17
Hour counter 19
Using Bluetooth OBELISK top3 19

3
Connecting the twilight switch,
Bluetooth OBELISK top3 and
smartphone (via app) 20
Restarting the twilight switch23
6. Technical data 24
7. Contact 25

4
1. Basic safety information
Danger of death through electric shock or fire!
 Installation should only be carried out by a
qualied electrician!
WARNING
•The device is designed for installation on DIN top hat
rails (in accordance with EN 60715)
2. Proper use
•The digital twilight switch is used for lighting equipment
(streets), external stairways, display windows, entrances etc.
•Only for use in closed, dry rooms
•Sensor is installed in the open-air
•Interface for Bluetooth OBELISK top3 (app)
!Do not use on safety devices, e.g. escape route doors, re
safety equipment etc.
Disposal
Dispose of device in environmentally sound manner

5
3. Installation and connection
Mounting the twilight switch
click
Test connection
45° cable
Spring plug-in
terminal opener
Bluetooth
OBELISK top3
(9070130)
DuoFix spring plug-
in terminal
!Check the depth of the control cabinet when OBELISK
top3 is connected. The depth must be > 94 mm.

6
Mount on DIN top hat rail (as dened in EN 60715)
Disconnect power source
Ensure device cannot be switched on
Check absence of voltage
Earth and bypass
Cover or shield any adjacent live components
C1
1 2 3
N
L
L
L N
–+
Ext1
max. 100 m
Data
Lux
max. 100 m
C2
C1
1 2 3
4 5 6
N
L
L
L
N
Data
–+
Lux
max. 100 m
LUNA 111 top3 LUNA 112 top3
Connecting the cable
Strip cable to 8 mm (max. 9)
Insert cable in the open DuoFix plug-in terminal at 45°
L2 cables per terminal position possible
To open the DuoFix plug-in terminal, press screwdriver
downwards
Disconnecting the cable
Use the screwdriver to push the load line connection
opener downwards

7
Connection/installation of light sensor
!Take length of connection cable into account: max. 100 m
(2 x 1.5 mm2), max. 50 m (2 x 0.75 mm2)
!Avoid running sensor wiring parallel to mains power
cables
Ensure correct polarity. Connect power source
Mounting light sensor 9070415
Mounting light sensor: 0.5-2.5 mm2, strip cable by 9 mm
(max. 10 mm)
max .o4mm

8
Installing light sensor 9070456
Installing light sensor: 0.25-1.5 mm2, strip cable by 8 mm
(max. 9 mm)
<9 mm
ca. 63 mm
max. 10 mm
8–9 mm
ø5–10 mm
<9 mm
ca. 63 mm
max. 10 mm
8–9 mm
ø5–10 mm
IP 66
IP 40
<9 mm
ca. 63 mm
max. 10 mm
8–9 mm
ø5–10 mm

9
Ø 20 mm
Ø 20 mm

10
4. Device description
Display & buttons

MENU OK
  OKMENU
06
12 18 24
MESSWERT
LX
18
–Activate display
–Open menu
–Cancel menu
–ESC
(leave menu)
–Save
selection
– Confirm
selection

Options
are displayed
Text line
Channel status
C1, C2
ON = On
OFF = Off
Lux value display
Sunrise/sunset
display
Display of the active buttons with
the relevant function

11
Operating instructions
YES
Confirmation
Press
OK
NO
Modify/
Change
Press
t u
1. Read text line
text/symbol represents
query
2. Make a decision

12
Overview of navigation menu
LIGHT
MENU
MANUAL OPTIONS END
u u uu
CHANNEL
* LUNA 111 top3
C1 off
CHANNEL C1 SENSORS
PERM ON
PERM OFF
OVERRI ON
TIMER
OPERATING
HOUR
EXT INPUT
END
CHANNEL C1
LUX VALUE
DELAY TIME
END
LCD-
ILLUMINATION
LANGUAGE
PIN
FACTORY
SETTINGS
INFO
END
Initial operation
DEUTSCH
ENGLISH
ESPANOL
FRANCAIS
CHANNEL C1
READING
u
...
Set language, press OK to conrm
Press any button and display follows on screen (see gure)

13
LIf all settings are performed, the screen alternately shows
the automatic display and READING
LIf a sensor is connected, the measured lux value appears
on screen (only during mains operation).
5. Settings and functions
Set lux values
LIGHT
CHANNEL C1
LUX VALUE LUX ON
LUX OFFDELAY TIME
END
MENU
u
LThe device has been preset at 15 lx for the switch on/
switch off level
Press MENU
Select LIGHT and press OK to conrm
Select CHANNEL C1 or C2, conrm with OK
Select LUX VALUE and press OK to conrm
Select LUX ON and press OK to conrm
Set LUX VALUE, conrm with OK

14
Typical brightness values
Daylight (bright) 80.000 lx
Ofce accommodation 500 lx
Hallways and stairs 100–150 lx
Street lighting 15 lx
Full moon ca. 0,3 lx
Set delay
LIGHT CHANNEL
C1
LUX VALUES
DELAY TIME ON DELAY
OFF DELAY
MINUTE
MINUTE
SECONDS
SECONDS
END
MENU
u
u
u
LAn on/off delay of 1 minute is preset to avoid faulty ope-
ration caused by lightning, car headlights etc. When the
delay ends the channel status will ash ON/OFF.
Press MENU
Select LIGHT and press OK to conrm
Select CHANNEL C1 or C2, conrm with OK
Select DELAY TIME, conrm with OK
Select ON DELAY, conrm with OK
MODIFY HOUR, use the + or – buttons to change minute
and conrm with OK.

15
Allocate sensors
LThe SENSORS are allocated in the menu under OPTIONS
OPTIONS
MENU
SENSORS
OPERATING
HOURS METER
EXTERNAL
OUTPUT
LCD
ILLUMINATION
CHANNEL C1
1 SENSOR
RECOGNISED
NO
SENSOR
1 ACTIVE
SENSOR
SENSOR 1
READING
SENSOR 1
ACTIVE DEACTIVATE
u u
u
u
u
u
...

*red LED ashes
on the sensor
*
Press MENU (see g.)
Connection options:
•1 LUNA + max. 4 light sensors
•10 LUNA + 1 light sensors
••Σmax. 16 devices (LUNA + light sensors)
LPresetting: all connected sensors are active for all chan-
nels. The sensor that sends the lowest lux value is active
Activating PIN code
The PIN code is set in OPTIONS via the menu.
LIf you have forgotten your PIN, call the Theben Hotline.
LHave the serial number ready.

16
OPTIONS
NO PIN
WITH PIN CURRENT PIN
NEW PIN
00 00
SENSORS
OPERATING
HOUR
LCD-
ILLUMINATION
LANGUAGE
PIN
FACTORY
SETTING
INFO
END
u
u
MENU
Setting manual or permanent switching
Manual or permanent switching can be set via the menu in
MANUAL or (in the automatic screen) by button combination
(see picture).
•Manual control:
Reversing the channel status to the next automatic or
programmed switching.
•Permanent switching:
As long as a permanent switching (on or off) is acti-
vated, the programmed switching times and switching
thresholds are ineffective
ok
Channel
C1
Channel
C2

17
Activating manual control
Briey press both buttons simultaneously
Activating permanent switching
Press both buttons simultaneously for 2 seconds
Cancelling manual/permanent switching
Press both buttons simultaneously
Set external input (only LUNA 111 top3)
For the channel, an EXTERNAL INPUT (see gure) can be set
with different functions.
3 sub-menus can be selected: Inactive, push button (function),
switch (function)
•NOT ACTIVE: The external input has no function
•BUTTON: Manual (manual control), Timer (countdown
timer) are selectable
•SWITCH: Permanent On, permanent Off are selectable
LIf a function is activated via an external push button or
switch, EXTERNAL is displayed.

18
OPTIONS
MENU
SENSORS
OPERATING
HOUR
EXT INPUT
LCD-
ILLUMINATION
BUTTON STAIRCASE
LIGHT
RESETABLE MINUTES
SWITCH OVERRIDE
EARLY CUT
NOT ACTIVE TIMER
u
uuu
uu
...

*
*Use switch without glow lamp (e.g.
in stairwells)
Press MENU, with uselect EXT INPUT and follow the indi-
cations on the display.
LAdditional power unit required for GPS if only one device
is connected to the antenna.
LRefer to the operating instructions when connecting a GPS
antenna (9070610).
Minimum number of participants needed to operate the GPS
antenna:
•2 x weekly timer TR 611 top3 RC, SELEKTA 171 top3 RC
LUNA 121–122 top3 RC each with 50 mA feed, or
•1 x weekly timer with 50 mA feed plus 1 x top2 GPS
power unit (9070892) with 50 mA feed

19
Hour counter
The operating hours of the channel (relay) are displayed and
deleted in the OPTIONS menu. If the number of operating
hours exceeds the value set in the Service menu, SERVICE will
appear in the display.
Example: Replace a lamp after after 5,000 h.
Delete operating hours or set a higher value in Service (e.g.
to 10,000 h)
Using Bluetooth OBELISK top3
All functions can also be transferred to the twilight switch
using the Bluetooth OBELISK top3 memory card (9070130).
Copying OBELISK → LUNA
Copies the switch program and optionally all twilight switch
settings (e.g. external input, time format, etc.) from the
memory card to the twilight switch.

20
Copying LUNA →OBELISK
Copies all switch programs and twilight switch settings to the
memory card.
Starting OBELISK program
Applies the thresholds and switching times that are program-
med on the memory card and executes them. As soon as the
memory card is removed, the switching times of the twilight
switch are re-activated.
uuu
u
u
OBELISK
COPY
OBELISK ->
LUNA
COPY LUNA
-> OBELISK
RUN
OBELISK
CHECK
OBELISK
END
OVERWRITE
OK
u
BLUETOOTH
COPY ALL
DATA
COPY
PROGRAM
END
Connecting the twilight switch, Bluetooth
OBELISK top3 and smartphone (via app)
The devices in the top3 range can be programmed using an
app (for Android, iOS) on a mobile end device. Communication
takes place via Bluetooth OBELISK top3. Switching programs
are transferred and direct switch commands are sent to the
device.
Download the OBELISK top3 app from the App Store or
Google Play Store