Theben TR 610 top2 User manual

1
TR 610 top2
6100100
TR 612 top2
6120100
307070
Time switch
EN
1. Basic safety information 3
2. Proper use 3
Disposal 3
3. Installation and connection4
Mounting the time switch 4
Connecting the cable 6
Disconnecting the cable 6
4. Device description 7
Display & buttons 7
Operating instructions 8

2
Overview of navigation menu 9
Initial operation 10
5. Settings and functions 11
Set switching time 11
Change switching times 12
Delete switching program 13
Activating PIN code 14
Setting manual or permanent
switching 15
Hour counter 15
Using the OBELISK top2 memo-
ry card 16
Resetting the time switch 17
6. Technical data 18
7. Contact 19

3
1. Basic safety information
Danger of death through electric shock or fire!
 Installation should only be carried out by a
qualied electrician!
WARNING
•The device is designed for installation on DIN top hat
rails (in accordance with EN 60715)
•The device corresponds to type 1 STU in accordance with
IEC/EN 60730-2-7
•Power reserve (10 years) is reduced if memory card is
inserted (using battery power)
!OBELISK top2 memory card: Avoid mechanical overload
and contamination during storage/transportation
2. Proper use
•The time switch is used for lighting, ventilation and
ushing applications etc.
•Only for use in closed, dry rooms
!Do not use on safety devices, e.g. escape route doors, re
safety equipment etc.
Disposal
Dispose of device in environmentally sound manner

4
3. Installation and connection
Mounting the time switch
Danger of death through electric shock or fire!
 Installation should only be carried out by a
qualied electrician!
WARNING
click

5
45° cable
Plug-in
screwless termi-
nal NC contact
OBELISK top2
memory card
(9070404)
Test tap
Load line connection
Mount on DIN top hat rails (as dened in EN 60715)
Switched voltage-free
Ensure device cannot be switched on
Check absence of voltage
Earth and bypass
Cover or shield any adjacent live components

6
Connecting the cable
Wiring diagrams 6100100 / 6120100
C1
1 2 3
L N
N
L
L
C2
C1
1 2 3
4 5 6 L
N
L
L
N
Strip cable to 8 mm (max. 9)
Insert cable in the open DuoFix® plug-in terminal at 45°
L2 cables per terminal position possible
To open the DuoFix® plug-in terminal, press screwdriver
downwards
Disconnecting the cable
Use the screwdriver to push the load line connection
opener downwards

7
4. Device description
Display & buttons

06
12 18 24
MENU OK
OKMENU
Programmed
switching times
Date display
Channel status
C1, C2
ON = On OFF = Off
Time display
Days of the week
from 1 to 7
Display of the active buttons
with the relevant function
–Activate display
–Open menu
–Cancel menu
–ESC
(leave menu)
–Save
selection
– Confirm
selection

Options
are displayed

8
Operating instructions
YES
Confirmation
Press
OK
NO
Modify/
Change
Press
t u
1. Read text line
text/symbol represents
query
2. Make a decision

9
Overview of navigation menu
PROGRAM
NEW
CHECK
MODIFY
DELETE
END
TIME/DATE MANUAL
OPTIONS END
TIME
SET DATE
SU--WI
WEEK
DAY
FORM DATE
FORM TIME
END
CHANNEL C1
OPERATING
HOUR
LCD ILLU-
MINATION
LANGUAGE
PIN
FACTORY
SETTING
INFO
END
MENU
PERM ON
PERM OFF
OVERR ON
HOLIDAY
END
u u u
u u

10
Initial operation
GERMAN
FRENCH
ITALIAN
DUTCH
RETAIN
PROGRAM
FORM DATE
DELETE
PROGRAM
YEAR
MENU
MONTH
DAY
FORM TIME
HOUR
MINUTE
SU-WI
EUROPE
END
u u
Set language, country, town/city, date, time as well as
summer/winter time (SU-WI)
Press any button and display follows on screen (see gure)

11
5. Settings and functions
Set switching time
same switching
time for
several days =
block
Switching
time for
one day


PROGRAM
MENU
NEW
CHECK
MODIFY
DELETE
END
CHANNEL C1
MEM FREE
56
ON
HOUR
MINUTE
MONDAY
SAVE
COPY
ADD
TUESDAY
u
u
SAVE
u u
LA switching time always consists of a start time and an
end time
LThere are 56 memory cells available
Example: Switch on sports hall lighting from Mon–Fri, 7:30 to
12:00 hrs

12
Press MENU
Select PROGRAM and press OK to conrm
Select NEW and press OK to conrm
Select CHANNEL C1 or C2, conrm with OK
Select ON (for turn-on times), conrm with OK
Set required turn-on time (Mo–Fr, 7:30), conrm with OK
Select COPY, conrm with OK
ADD TUESDAY is displayed, conrm by pressing OK and also
conrm the days We, Th, Fr by pressing OK.
Continue with u until SAVE is displayed.
Conrm by pressing OK.
Repeat all steps for the turn-off time, however instead of
selecting ON with uselect OFF and enter 12:00 for hour and
minute.
Change switching times
MENU
uCHANNEL C1
MONDAY
MODIFY
HOUR
MODIFY
MINUTE
MODIFY
SINGLE
DAY
MODIFY
BLOCK
PROGRAM
NEW
CHECK
MODIFY
DELETE
u
u

13
LYou can either change or delete a block, i.e. a switching
time copied for several days (e.g. Mon-Fri) or a single
switching time
Change individual switching times
Press MENU
Select PROGRAM and press OK to conrm
Select MODIFY, conrm by pressing OK
Select CHANNEL C1 or C2, conrm with OK
Select day, conrm with OK
MODIFY HOUR, use the + or – buttons to change hour and
minute and conrm with OK.
To change several switching times, select MODIFY BLOCK,
conrm with OK
Delete switching program
MENU
uCHANNEL C1
MONDAY
DELETE
SINGLE DAY
DELETE
BLOCK
PROGRAM
NEW
CHECK
MODIFY
DELETE
u
u

14
LYou can either delete a block, i.e. a switching time copied
for several days (e.g. Mon-Fri) or a single switching time
Press MENU.
Select PROGRAM and conrm with OK
Select DELETE, conrm with OK
MONDAY is displayed, conrm with OK
Select DELETE BLOCK, conrm with OK
With u DELETE MONDAY etc. individual days can also be
cleared.
Activating PIN code
The PIN code is set in OPTIONS via the menu.
LIf you have forgotten your PIN, call the Theben Hotline.
LHave the serial number ready.
OPTIONS
NO PIN
WITH PIN CURRENT
PIN
NEW PIN
00 00
OPERATING
HOURS
LCD ILLU-
MINATION
LANGUAGE
PIN
FACTORY
SETTING
INFO
END
u
u
MENU

15
Setting manual or permanent switching
Manual or permanent switching can be set via the menu in
MANUAL or (in the automatic screen) by button combination
(see picture).
•Manual control:
Reversing the channel status to the next automatic or
programmed switching.
•Permanent switching:
As long as a permanent switching (on or off) is activated,
the programmed switching times are ineffective
ok
Chanel
C1
Chanel
C2
Activating manual control
Briey press both buttons simultaneously
Activating permanent switching
Press both buttons simultaneously for 2 seconds
Cancelling manual/permanent switching
Press both buttons simultaneously
Hour counter
The operating hours of the channel (relay) are displayed and
deleted in the OPTIONS menu. If the number of operating

16
hours exceeds the value set in the Service menu, SERVICE will
appear in the display.
Example: Replace a lamp after after 5,000 h.
Delete operating hours or set a higher value in Service (e.g.
to 10,000 h)
Using the OBELISK top2 memory card
All functions can also be set on the PC using the OBELISK
software and transferred to the device via the memory card.
Insert memory card in the time switch
Read in/out saved switching times and device setups in
the time switch or start Obelisk program
Remove memory card after copying etc.
!Avoid mechanical overload and contamination during
storage/transport
LPC software OBELISK top2 available at
www.theben.de

17
Copying OBELISK → TIME
This copies the switching program and optionally all time
switch settings (e.g. external input, time format etc.) from the
memory card in the time switch.
Copying TIME →OBELISK
This copies all switch programmes and settings from the time
switch to the memory card.
Starting OBELISK program
Takes on the switching times that are programmed on the
memory card.
As soon as the memory card is removed, the switching times
of the time switch are re-activated.
uuu
OBELISK
COPY
OBELISK ->
TSWI
COPY TSWI
-> OBELISK
RUN
OBELISK
CHECK
OBELISK
OVERWRITE
OK
OVERWRITE
OK
Resetting the time switch
Press the 4 buttons simultaneously
▻You can choose between KEEP PROGRAM and DELETE
PROGRAM

18
6. Technical data
Operating voltage: 230–240 V AC +10 % /
–15 %
Frequency: 50–60 Hz
Power consumption TR 610/612: max. 0,84/1,13 W
Max switching capacity: 16 A (at 250 V, cos ϕ= 1)
switching capacity: 10 A (at 250 V, cos ϕ= 0,6)
Min. switching capacity: 10 mA/230 V AC
100mA/24 V AC/DC
Switching output: switching of choice of
phase is permitted
TR 610 top2: suitable for switching
SELV (Safe Extra-Low
Voltage)
Shortest switching time: 1 min
Protection rating: IP 20 in accordance with
EN 60529
Protection class: II in accordance with
EN 60730-1 subject to
designated installation
Operating temperature: –30 °C … +55 °C
Power reserve: 10 years at +20 °C
Time accuracy: ±0,25 s/day (25 °C)
Rated impulse withstand voltage: 4 kV
Pollution degree: 2
Contact: wo way switch
Glow lamp load: 2600 W
Halogen lamp load: 2600 W

19
Fluorescent lamp load: uncor-
rected:
Series corrected:
parallel-corrected:
2300 VA
730 VA (80 µF)
Compact uorescent tubes (EVG): 170 W
LED lamps (<2 W): 30 W
LED lamps (>2 W < 8 W): 100 W
LED lamps (>8 W): 120 W
7. Contact
Theben AG
Hohenbergstr. 32
72401 Haigerloch
GERMANY
Tel. [phone]
Fax [phone]
Hotline
Tel. [phone]
[email protected]
Addresses, telephone numbers etc.
www.theben.de