Themis RES-22XR3 User manual

RES-22XR3
Configuration 3
RES-22XR3
Configuration 3
Insta ation
Manua
Installation
Manual
2RU 19” Rack-Mount Rugged Enterprise Server
with X8DT3/-F/-LN4F Motherboard Configuration
/ Two Quad-Core 5500 or Quad/Six-Core 5600 Xeon CPUs

Two Quad-Core 5500 or Quad/Six-Core 5600 Xeon CPUs
RES-22XR3 Configuration 3
RES-22XR3 Configuration 3
Two Quad-Core 5500 or Quad/Six-Core 5600 Xeon CPUs
RES-22XR3 Configuration 3
RES-22XR3 Configuration 3
Two Quad-Core 5500 or Quad/Six-Core 5600 Xeon CPUs
RES-22XR3 Configuration 3
RES-22XR3 Configuration 3
Two Quad-Core 5500 or Quad/Six-Core 5600 Xeon CPUs
RES-22XR3 Configuration 3
RES-22XR3 Configuration 3
Two Quad-Core 5500 or Quad/Six-Core 5600 Xeon CPUs
RES-22XR3 Configuration 3
RES-22XR3 Configuration 3
Two Quad-Core 5500 or Quad/Six-Core 5600 Xeon CPUs
RES-22XR3 Configuration 3
RES-22XR3 Configuration 3
Two Quad-Core 5500 or Quad/Six-Core 5600 Xeon CPUs
RES-22XR3 Configuration 3
RES-22XR3 Configuration 3

Themis Computer—Rest of World
5 Rue Irene Joliot-Curie
38320 Eybens, France
Phone [phone]
Fax [phone]
Themis Computer—Americas and Pacific Rim
47200 Bayside Parkway
Fremont, CA 94538
Phone [phone]
Fax [phone]
World Wide Web http://www themis com
RES-22XR3InstallationManual
-Configuration3*
Version 1.0—January 2011
* SuperMicro Motherboards X8DT3 / X8DT3-F / X8DT3-LN4F

Copyright © 2011 Themis Computer, Inc.
ALL RIGHTS RESERVED. No part of this publication may be reproduced in any form, by
photocopy, microfilm, retrieval system, or by any other means now known or hereafter invented without
the prior written permission of Themis Computer.
The information in this publication has been carefully checked and is believed to be accurate. However,
Themis Computer assumes no responsibility for inaccuracies. Themis Computer retains the right to
make changes to this publication at any time without prior notice. Themis Computer does not assume
any liability arising from the application or use of this publication or the product(s) described herein.
RESTRICTED RIGHTS LEGEND: Use, duplication, or disclosure by the United States Government
is subject to the restrictions set forth in DFARS 252.227-7013 (c)(1)(ii) and FAR 52.227-19.
TRADEMARKS and SERVICEMARKS
Themis®is a registered trademark of Themis Computer, Inc.
Intel® and Xeon® are registered trademarks of Intel Corporation.
Red Hat®is a registered trademark of Red Hat, Inc.
Linux®is a registered trademark of Linus Torvalds.
SuperMicro®is a registered trademark of Super Micro Computer, Inc.
All other trademarks, servicemarks, or registered trademarks used in this publication are the property of
their respective owners.
CE Marking
This product complies with the European EMC Directive (2004/108/EC) and the European Low Voltage
Safety Directive (2006/95/EC)/.
Safety Precautions
Instructions regarding safety precautions during installation, operation, or maintenance of the equipment
are given in the section entitled “Safety Instructions” on page -iv.
WARNINGS and CAUTIONS
The definitions of WARNINGS and CAUTIONS as used in this document are given in the Preface in
the section entitled “Notes, Cautions, Warnings, and Sidebars”.
RES-22XR3 Installation Manual - Configuration 3, Version 1.0
January 2011
Part Number: 117018-024
Themis Customer Support
North America, South America, and Pacific Rim
Telephone: [phone]
Fax: [phone]
E-mail: [e-mail]
Web Site: http://www.themis.com

iii
Themis Computer
VersionRevisionHistory
Version 1.0.......................................................................................January 2011

iv Themis Computer
RES-22XR3 Installation Manual - Configuration 3 Version 1.0
Safety Instructions
To maximize user safety and ensure correct device operation, all instructions con-
tained in this section should be read carefully.
• The device must be used in accordance with the instructions for use.
• Electrical installations in the room must correspond to the requirements of
respective regulations.
• Take care that there are no cables, particularly mains cables, in areas where
persons can trip over them.
• Do not use a mains connection in sockets shared by a number of other power
consumers. Do not use an extension cable.
• Only use the mains cable supplied.
• The unit is completely disconnected from the power source only when the
power cord is disconnected from the power source. Therefore the power cord
and its connectors must always remain easily accessible.
• Do not set up the device in the proximity of heat sources or in a damp location.
Make sure the device has adequate ventilation.
• All plugs on the connection cables must be screwed or locked to the chassis
housing.
• The device is designed to be used in horizontal position only.
• The device is no longer safe to operate when
— the device has visible damage or
— the device no longer functions.
• In these cases, the device must be shut down and secured against unintentional
operation.
• Repairs may only be carried out by a person authorized by Themis Computer.
• The device may only be opened for the installation and removal of extension
(PCI) cards, memory modules, storage drives, fan housings, power supplies
Caution: It is important that the user observe all warnings and instructions
that are on the device and contained in this manual.

v
Themis Computer
Safety Instructions
(RES-22 and RES-22 systems only), and the lithium battery—all in accordance
with the instructions given in this manual.
• If extensions are made to the device, the legal stipulations and the device spec-
ifications must be observed.
• The device must be switched off when removing the top cover; for example,
before installing extension (PCI) cards.
Operation of Laser Source Devices
DVD/CD-ROM drives contain laser light-emitting diodes (classified in accordance
with IEC 825-1:1993: LASER CLASS 1) and, therefore, must not be opened.
If the enclosure of such a drive is opened, invisible laser radiation is emitted. Do
not allow yourself to be exposed to this radiation.
The laser system meets the code of Federal Regulations 21 CFR,1040 for the USA
and Canadian Radiation Emitting Devices Act, REDR C 1370.
Electrostatic Discharge (ESD)
A sudden discharge of electrostatic electricity can destroy static-sensitive devices
or micro-circuitry. Proper packaging and grounding techniques are necessary pre-
cautions to prevent damage. Always take the following precautions:
1. Transport boards in static-safe containers such as boxes or bags.
2. Keep electrostatic-sensitive parts in their containers until they arrive at static-
free stations.
3. Always be properly grounded when touching a sensitive board, component, or
assembly.
4. Store electrostatic-sensitive boards in protective packaging or on conductive
foam.
Grounding Methods
Guard against electrostatic damage at workstations by following these steps:
1. Cover workstations with approved anti-static material. Provide a wrist strap
connected to a work surface and properly grounded tools and equipment.

vi Themis Computer
RES-22XR3 Installation Manual - Configuration 3 Version 1.0
2. Use anti-static mats, heel straps, or air ionizers to give added protection.
3. Handle electrostatic-sensitive components, boards, and assemblies by the case
or the PCB edge.
4. Avoid contact with pins, leads, or circuitry.
5. Turn off power and input signals before inserting and removing connectors or
test equipment.
6. Keep the work area free of non-conductive materials such as ordinary plastic as-
sembly aids and Styrofoam.
7. Use field service tools, such as cutters, screwdrivers, and vacuums that are con-
ductive.
8. Always place drives and boards PCB-assembly-side down on the foam.
Instructions for the Lithium Battery
RES systems are equipped with a lithium battery installed on the motherboard. To
replace this battery, please observe the instructions that are described in this man-
ual.
Warning: There is a danger of explosion when the wrong type of battery is used
as a replacement.

vii
Themis Computer
Table of Contents
Safety Instructions .......................................................................................................... iv
Preface ............................................................................................................................ xix
1. Overview and Specifications ........................................................................................ 1-1
1.1 Overview ................................................................................................................ 1-1
1.2 System LEDs and I/O Connectors ......................................................................... 1-6
1.3 Chipset Overview .................................................................................................. 1-9
1.3.1 The 5500/5600 Series CPU and the 5520 Chipset ..................................... 1-9
1.4 Special Features ................................................................................................... 1-10
1.4.1 Recovery from AC Power Loss ...............................................................1-10
1.5 PC Health Monitoring .......................................................................................... 1-10
1.5.1 Fan Status Monitor with Firmware Control ............................................. 1-10
1.5.2 Environmental Temperature Control ....................................................... 1-10
1.5.3 System Resource Alert ............................................................................. 1-11
1.6 ACPI Features ...................................................................................................... 1-11
1.6.1 Slow Blinking LED for Suspend-State Indicator .................................... 1-11
1.6.2 Main Switch Override Mechanism .......................................................... 1-12
1.6.3 Wake-On-LAN (WOL) ............................................................................ 1-12
1.7 Power Supply ....................................................................................................... 1-13
1.8 Super I/O Controller ............................................................................................ 1-14
1.9 Specifications ....................................................................................................... 1-15
1.9.1 General ..................................................................................................... 1-15
1.9.2 Electrical .................................................................................................. 1-16
1.9.2.1 System Power ........................................................................... 1-16
1.9.2.2 Output Voltage .......................................................................... 1-16
1.9.3 Environmental .......................................................................................... 1-17
1.9.3.1 Shock ........................................................................................ 1-17
1.9.3.2 Electrostatic Discharge ............................................................. 1-17
1.9.3.3 Noise ......................................................................................... 1-17
1.10 Packaging and Shipping ....................................................................................... 1-19

viii Themis Computer
RES-22XR3 Installation Manual - Configuration 3 Version 1.0
1.10.1 Accessory Kit ........................................................................................... 1-19
1.10.2 Rack-Mount Slides (Optional) ................................................................. 1-20
2. Installation and Operation ........................................................................................... 2-1
2.1 Installation Procedures ........................................................................................... 2-1
2.1.1 Remove Protective Top Cover ................................................................... 2-1
2.1.2 Memory Modules ....................................................................................... 2-3
2.1.2.1 Installation .................................................................................. 2-4
2.1.3 PCI Cards ................................................................................................... 2-7
2.1.3.1 Installing Cards ........................................................................... 2-7
2.1.4 Lithium Battery .......................................................................................... 2-8
2.1.4.1 Removing the Lithium Battery ................................................... 2-8
2.1.4.2 Installing a Lithium Battery ........................................................ 2-8
2.1.5 SAS/SATA II Storage Drive ...................................................................... 2-9
2.1.5.1 Opening the RES-22XR3 Front Door
(required for Storage Drive access) ............................................ 2-9
2.1.5.2 Storage-Drive Removal ............................................................ 2-10
2.1.5.3 Storage-Drive Installation ......................................................... 2-11
2.1.6 Removable 60-mm Fan ............................................................................ 2-12
2.1.6.1 Removing and Installing a 60-mm Fan ..................................... 2-12
2.1.7 Power Supply ........................................................................................... 2-13
2.1.7.1 Removing a Power Supply ....................................................... 2-13
2.1.7.2 Installing a Power Supply .........................................................2-14
2.2 Rack Mounts ........................................................................................................ 2-14
2.2.1 Mounting Brackets ................................................................................... 2-14
2.2.2 Rack-Mount Slides (Optional) ................................................................. 2-15
2.3 Operation ............................................................................................................. 2-16
2.3.1 Plugging in the AC Power Cords ............................................................. 2-16
2.3.2 Turning the System On ............................................................................2-16
2.3.3 Getting Started ......................................................................................... 2-17
2.3.3.1 Configuration ............................................................................ 2-17
2.3.3.2 Linux Installation ...................................................................... 2-17
2.3.4 Turning the System Off ...........................................................................2-17
3. BIOS Setup Utility ........................................................................................................ 3-1
3.1 Introduction ............................................................................................................ 3-1
3.1.1 Starting BIOS Setup Utility ....................................................................... 3-1
3.1.2 How To Change the Configuration Data ................................................... 3-2

ix
Themis Computer
Table of Contents
3.1.3 Starting the Setup Utility ...........................................................................3-2
3.2 Main Setup ............................................................................................................. 3-3
3.2.1 System Overview ....................................................................................... 3-3
3.2.1.1 System Time/System Date .......................................................... 3-3
3.2.1.2 Super micro X8DT3 .................................................................... 3-4
3.2.1.3 Processor ..................................................................................... 3-4
3.2.1.4 System Memory .......................................................................... 3-4
3.3 Advanced Setup Configurations ............................................................................ 3-5
3.3.1 BOOT Features .......................................................................................... 3-5
3.3.1.1 Quick Boot .................................................................................. 3-5
3.3.1.2 Quiet Boot ................................................................................... 3-5
3.3.1.3 AddOn ROM Display Mode ....................................................... 3-5
3.3.1.4 Bootup Num-Lock ...................................................................... 3-5
3.3.1.5 Wait For 'F1' If Error ..................................................................3-5
3.3.1.6 Hit 'Del' Message Display ........................................................... 3-5
3.3.1.7 Interrupt 19 Capture .................................................................... 3-6
3.3.2 Power Configuration .................................................................................. 3-6
3.3.2.1 Power Button Function ............................................................... 3-6
3.3.2.2 Restore on AC Power Loss ......................................................... 3-6
3.3.2.3 Watch Dog Timer .......................................................................3-6
3.3.3 Processor and Clock Options ..................................................................... 3-6
3.3.3.1 C1E Support ................................................................................ 3-6
3.3.3.2 Hardware Prefetcher (Available when supported by the CPU) .. 3-7
3.3.3.3 Adjacent Cache Line Prefetch
(Available when supported by the CPU) .................................... 3-7
3.3.3.4 Intel® Virtualization Technology
(Available when supported by the CPU) .................................... 3-7
3.3.3.5 Execute-Disable Bit Capability
(Available when supported by the OS and the CPU) .................3-7
3.3.3.6 Simultaneous Multi-Threading
(Available when supported by the CPU) .................................... 3-7
3.3.3.7 Active Processor Cores ............................................................... 3-8
3.3.3.8 Intel® Speed_Step™ Technology .............................................. 3-8
3.3.3.9 Intel® C-STATE Tech ................................................................ 3-8
3.3.3.10 Clock Spread Spectrum .............................................................. 3-8
3.3.4 Advanced Chipset Control ......................................................................... 3-8
3.3.5 QPI Links Speed ........................................................................................ 3-8
3.3.5.1 QPI Frequency ............................................................................ 3-8

xThemis Computer
RES-22XR3 Installation Manual - Configuration 3 Version 1.0
3.3.5.2 QPI L0s and L1 ........................................................................... 3-9
3.3.5.3 Memory Frequency ..................................................................... 3-9
3.3.5.4 Memory Mode ............................................................................ 3-9
3.3.5.5 Demand Scrubbing ..................................................................... 3-9
3.3.5.6 Patrol Scrubbing ......................................................................... 3-9
3.3.5.7 Throttling - Closed Loop/Throttling - Open Loop ...................... 3-9
3.3.6 Northbridge Configuration ...................................................................... 3-11
3.3.6.1 Crystal Beach/DMA (Direct Memory Access) ......................... 3-11
3.3.6.2 Crystal Beach/DCA (Direct Cache Access) .............................3-11
3.3.6.3 NUMA Support ......................................................................... 3-11
3.3.6.4 Intel VT-d ................................................................................. 3-11
3.3.7 Southbridge Configuration ...................................................................... 3-12
3.3.7.1 USB Functions .......................................................................... 3-12
3.3.7.2 Legacy USB Support ................................................................ 3-12
3.3.7.3 USB 2.0 Controller ................................................................... 3-12
3.3.7.4 USB 2.0 Controller Mode ......................................................... 3-12
3.3.7.5 BIOS EHCI Hand-Off .............................................................. 3-12
3.3.7.6 HDA Controller ........................................................................ 3-12
3.3.7.7 Reserved Page Rout ..................................................................3-12
3.3.8 IDE/SATA Configuration ........................................................................ 3-13
3.3.8.1 SATA#1 Configuration ............................................................. 3-13
3.3.8.2 Configure SATA#1 as .............................................................. 3-13
3.3.8.3 SATA#2 Configuration ............................................................. 3-13
3.3.8.4 Primary IDE Master/Slave, Secondary IDE Master/Slave,
Third IDE Master, and Fourth IDE Master ............................... 3-13
3.3.8.5 Block (Multi-Sector Transfer) .................................................. 3-14
3.3.8.6 PIO Mode .................................................................................. 3-14
3.3.8.7 DMA Mode ............................................................................... 3-15
3.3.8.8 S.M.A.R.T. For Storage Drives ................................................ 3-16
3.3.8.9 32 Bit Data Transfer ................................................................. 3-16
3.3.8.10 Hot Plug .................................................................................... 3-16
3.3.8.11 IDE Detect Timeout (sec) ......................................................... 3-16
3.3.9 PCI/PnP Configuration ............................................................................ 3-16
3.3.9.1 Clear NVRAM .......................................................................... 3-16
3.3.9.2 Plug & Play OS ......................................................................... 3-16
3.3.9.3 PCI Latency Timer .................................................................... 3-16
3.3.9.4 PCI IDE Bus Master ................................................................. 3-17
3.3.9.5 Slot 1 Option ROM~Slot 6 Option ROM ................................. 3-17

xi
Themis Computer
Table of Contents
3.3.9.6 LAN1 PXE/LAN2 PXE/LAN3 PXE/LAN4 PXE
(-LN3 PXE/-LN4 PXE: for LN4 models only) ........................ 3-17
3.3.10 Super IO Device Configuration ............................................................... 3-17
3.3.10.1 Onboard Floppy Controller ....................................................... 3-17
3.3.10.2 Floppy A/Floppy B ................................................................... 3-17
3.3.10.3 Serial Port1 Address/ Serial Port2 Address .............................. 3-17
3.3.10.4 Watch Dog Timer ..................................................................... 3-18
3.3.11 Remote Access Configuration ................................................................. 3-18
3.3.11.1 Remote Access .......................................................................... 3-18
3.3.11.2 Serial Port Mode ....................................................................... 3-18
3.3.11.3 Flow Control ............................................................................. 3-18
3.3.11.4 Redirection After BIOS POST ................................................. 3-18
3.3.11.5 Terminal Type ........................................................................... 3-19
3.3.11.6 VT-UTF8 Combo Key Support ................................................ 3-19
3.3.11.7 Sredir Memory Display Delay .................................................. 3-19
3.3.12 System Health Monitor ............................................................................ 3-19
3.3.12.1 CPU Overheat Alarm ................................................................ 3-19
3.3.12.2 CPU Temperature/System Temperature ................................... 3-20
3.3.12.3 System Temperature ................................................................. 3-21
3.3.12.4 Voltage Monitoring ................................................................... 3-21
3.3.12.5 System Fan Monitor .................................................................. 3-21
3.3.12.6 Fan1 ~ Fan 8 Reading ...............................................................3-21
3.3.13 ACPI Configuration ................................................................................. 3-22
3.3.13.1 ACPI Version Features ............................................................. 3-22
3.3.13.2 ACPI APIC Support .................................................................. 3-22
3.3.13.3 APIC ACPI SCI IRQ ................................................................ 3-22
3.3.13.4 Headless Mode .......................................................................... 3-22
3.3.13.5 High Performance Event Timer ................................................ 3-22
3.3.14 Trusted Computing .................................................................................. 3-22
3.3.14.1 TCG/TPM (Trusted Platform Module) Support ....................... 3-22
3.3.15 IPMI Configuration .................................................................................. 3-23
3.3.15.1 Status of BMC .......................................................................... 3-23
3.3.16 View BMC System Event Log ................................................................ 3-23
3.3.16.1 Clear BMC System Event Log ................................................. 3-24
3.3.17 Set LAN Configuration ............................................................................ 3-24
3.3.17.1 Channel Number ....................................................................... 3-24
3.3.17.2 Channel Number Status ............................................................ 3-24
3.3.17.3 IP Address Source ..................................................................... 3-24

xii Themis Computer
RES-22XR3 Installation Manual - Configuration 3 Version 1.0
3.3.18 IP Address Configuration ........................................................................ 3-25
3.3.18.1 Parameter Selector .................................................................... 3-25
3.3.18.2 IP Address ................................................................................. 3-25
3.3.18.3 Current IP Address in BMC ...................................................... 3-25
3.3.19 MAC Address Configuration ................................................................... 3-25
3.3.19.1 Parameter Selector .................................................................... 3-25
3.3.19.2 MAC Address ........................................................................... 3-25
3.3.19.3 Current MAC Address in BMC ................................................ 3-25
3.3.20 Subnet Mask Configuration ..................................................................... 3-26
3.3.20.1 Parameter Selector .................................................................... 3-26
3.3.20.2 Subnet Mask ............................................................................. 3-26
3.3.20.3 VLAN Tagging ......................................................................... 3-26
3.3.21 SEL PEF Configuration ........................................................................... 3-26
3.3.21.1 PEF Configuration .................................................................... 3-26
3.3.21.2 BMC Watch Dog Timer Action ................................................ 3-27
3.3.22 DMI Event Log ........................................................................................ 3-27
3.3.22.1 View Event Log ........................................................................ 3-27
3.3.22.2 Mark all events as read ............................................................. 3-28
3.3.22.3 Clear event log .......................................................................... 3-28
3.4 Security Settings .................................................................................................. 3-29
3.4.1 Supervisor Password ................................................................................ 3-29
3.4.2 User Password .......................................................................................... 3-29
3.4.3 Change Supervisor Password ................................................................... 3-29
3.4.4 Change User Password ............................................................................ 3-30
3.4.5 Clear User Password (Available only if User Password has been set) .... 3-30
3.4.6 Password Check ....................................................................................... 3-30
3.4.7 Boot Sector Virus Protection ................................................................... 3-30
3.5 Boot Configuration .............................................................................................. 3-31
3.5.1 Boot Device Priority ................................................................................ 3-31
3.5.2 Storage Drives .......................................................................................... 3-31
3.5.3 Removable Drives .................................................................................... 3-32
3.5.4 CD/DVD Drives ...................................................................................... 3-32
3.6 Exit Options ......................................................................................................... 3-32
3.6.1 Save Changes and Exit ............................................................................ 3-33
3.6.2 Discard Changes and Exit ........................................................................ 3-33
3.6.3 Discard Changes ...................................................................................... 3-33
3.6.4 Load Optimal Defaults ............................................................................. 3-33

xiii
Themis Computer
Table of Contents
3.6.5 Load Fail-Safe Defaults ...........................................................................3-33
3.7 BIOS Recovery .................................................................................................... 3-34
3.7.1 How to Recover the AMIBIOS Image (-the Main BIOS Block) ............ 3-34
3.7.2 Boot Sector Recovery from a USB Device ............................................. 3-34
3.7.3 Boot Sector Recovery from an IDE CD-ROM ........................................ 3-35
3.7.4 Boot Sector Recovery from a Serial Port (“Serial Flash”) ...................... 3-35
Appendix A. Connector Pinouts ...................................................................................... A-1
A.1 PS/2 Keyboard and Mouse ................................................................................... A-1
A.2 USB Ports ............................................................................................................. A-2
A.3 Serial Ports ............................................................................................................ A-2
A.4 Gigabit Ethernet LAN Port ................................................................................... A-3
A.5 IPMI Dedicated LAN Port .................................................................................... A-3
Appendix B. Rack-Mount Slide Installation ...................................................................B-1
Appendix C. Red Hat Enterprise Linux 5 Installation ..................................................C-1
C.1 Introduction ............................................................................................................C-1
C.2 Installation .............................................................................................................C-1
Appendix D. Optional Remote On/Off Switch .............................................................. D-1
D.1 Remote On/Off Configuration .............................................................................. D-1
D.2 Remote On-Only Configuration ........................................................................... D-2
D.3 Ordering the Remote On/Off Switch .................................................................... D-2
Appendix E. Re-Packing Instructions .............................................................................E-1
E.1 Re-Packaging for Shipment ...................................................................................E-1
E.2 Packing Components .............................................................................................E-1
E.3 Instructions for Re-Packing ...................................................................................E-2
Index ................................................................................................................Index-1
Reader Comment Card

xiv Themis Computer
RES-22XR3 Installation Manual - Configuration 3 Version 1.0

xv
Themis Computer
Table of Contents
List of Figures
Figure 1 Rugged Enterprise Server RES-22XR3 (Doors Removed) ............................. xix
Figure 2 Front View of a Standard Rear-I/O RES-22 Chassis (Doors Removed)........ xxii
Figure 3 Rear View of a Standard Rear-I/O RES-22 Chassis...................................... xxiii
Figure 4 Front View of a Front-I/O RES-22 Chassis................................................... xxiii
Figure 5 Rear View of a Front-I/O RES-22 Chassis.................................................... xxiii
Figure 1-1 RES-22XR3 Configuration 3 (with Rack Mounts).......................................... 1-1
Figure 1-2 X8DT3 Motherboard Block Diagram.............................................................. 1-3
Figure 1-3 External Features of the RES-22XR3 Configuration 3 (Front and Rear)........ 1-4
Figure 1-4 Major Components of RES-22XR3 Configuration 3 (Open Top View)......... 1-5
Figure 1-5 RES-22XR3 Configuration 3 System LEDs and I/O Connectors ................... 1-6
Figure 1-6 RES-22XR3 with Front Sound Baffle Installed (Front View) ...................... 1-17
Figure 1-7 RES-22XR3 with Rear Sound Baffle Installed (Rear View)......................... 1-18
Figure 2-1 Remove the RES-22XR3 Protective Access Cover......................................... 2-2
Figure 2-2 Remove Air-Flow Deflector Screws................................................................ 2-4
Figure 2-3 Memory Module Slot Locations (X8DT3 Motherboard) ................................ 2-5
Figure 2-4 Memory Module Removal............................................................................... 2-6
Figure 2-5 PCI Card Installation (X8DT3/-F/-LN4F Motherboards) ............................... 2-7
Figure 2-6 The RES-22XR3 Lithium Battery and Socket................................................. 2-8
Figure 2-7 Opening the RES-22XR3 Front Bezel Doors.................................................. 2-9
Figure 2-8 Unlocking the RES-22XR3 Storage Drives (Front Doors Removed)........... 2-10
Figure 2-9 RES-22XR3 Storage Drive Removal ............................................................ 2-11
Figure 2-10 The RES-22XR3 Front and Rear 60-mm-Fans.............................................. 2-12
Figure 2-11 The RES-22XR3 Power Supply Locking Mechanism .................................. 2-13
Figure 2-12 Right Rack-Mount Bracket............................................................................ 2-14
Figure 2-13 AC Power Socket and LED on the RES-22XR3 Rear................................... 2-16
Figure 2-14 System Power Button and LED on the RES-22XR3 Front ........................... 2-16

xvi Themis Computer
RES-22XR3 Installation Manual - Configuration 3 Version 1.0
Figure 3-1 Main BIOS Setup Screen................................................................................. 3-3
Figure 3-2 Security Settings ............................................................................................ 3-29
Figure 3-3 Boot Settings.................................................................................................. 3-31
Figure 3-4 Exit Options................................................................................................... 3-32
Figure 3-5 AMI_FLSH HyperTerminal .......................................................................... 3-37
Figure 3-6 ROM File Extraction ..................................................................................... 3-37
Figure 3-7 FLASH Recovery .......................................................................................... 3-38
Figure A-1 USB Connector............................................................................................... A-2
Figure A-2 COM1/COM2 Serial Connector..................................................................... A-2
Figure A-3 Ethernet Connector, Type RJ45...................................................................... A-3
Figure B-1 Screw Locations for Rack-Mount Slides......................................................... B-1
Figure B-2 RES-22XR3 Rack-Mount Slide Installation.................................................... B-3
Figure C-1 Power On after Linux DVD is Inserted into Drive.......................................... C-2
Figure C-2 Skip Key .......................................................................................................... C-2
Figure C-3 Welcome Screen .............................................................................................. C-3
Figure C-4 Language Selection.......................................................................................... C-4
Figure C-5 Selecting Layout Type..................................................................................... C-5
Figure C-6 Enter Installation Number................................................................................ C-6
Figure C-7 Partitioning....................................................................................................... C-7
Figure C-8 Reviewing Option............................................................................................ C-8
Figure C-9 Creating a Custom Layout............................................................................... C-9
Figure C-10 Setting Up Boot Loader................................................................................. C-10
Figure C-11 Master Boot Record (MBR) .......................................................................... C-11
Figure C-12 Network Devices List .................................................................................... C-12
Figure C-13 Edit Interface Pop-Up Screen ........................................................................ C-13
Figure C-14 Selecting Time Zone...................................................................................... C-14
Figure C-15 Setting Up Root Account and Password........................................................ C-15
Figure C-16 Package Installation Default Screen .............................................................. C-16

xvii
Themis Computer
Table of Contents
Figure C-17 Optional Packages.......................................................................................... C-17
Figure C-18 Option to Review or Continue....................................................................... C-18
Figure C-19 Installation Begins ......................................................................................... C-18
Figure C-20 Installation is Complete ................................................................................. C-19
Figure C-21 Login Screen.................................................................................................. C-20
Figure C-22 Ready to use the Desktop............................................................................... C-20
Figure D-1 Remote On/Off Switch Module...................................................................... D-1
Figure E-1 Packaging Components.................................................................................... E-2
Figure E-2 Order of Assembly........................................................................................... E-3
List of Tables
Table 1 RES-x2XR3 20” Chassis Manual Matrix.......................................................... xx
Table 2 RES-x2XR3S / RES-x1XR3 17”-Deep Chassis Manual Matrix ..................... xxi
Table 3 Front I/O 16”-Deep Chassis Manual Matrix (AC and DC Power Supplies).. xxii
Table 1-1 RES-22XR3 Configuration 3 Motherboard Options ...................................... 1-2
Table 1-2 Major Features of the RES-22XR3 Configuration 3 ...................................... 1-2
Table 1-3 System LEDs .................................................................................................. 1-7
Table 1-4 I/O Connectors (Rear Panel)........................................................................... 1-8
Table 1-5 RES-22XR3 General Specifications............................................................. 1-15
Table 1-6 RES-22XR3 Electrical Specifications .......................................................... 1-16
Table 1-7 Approximate Weights of the RES Series...................................................... 1-20
Table 2-1 RES-22XR3 Memory Capacity ...................................................................... 2-3
Table 2-2 RES-22XR3 Memory Population................................................................... 2-3
Table A-1 PS/2 Keyboard/Mouse Pinouts and Signal Definitions................................. A-1
Table A-2 USB Connector Pinouts................................................................................. A-2
Table A-3 COM1/COM2 Serial Connector Pinouts....................................................... A-2
Table A-4 RJ45 Ethernet Pinout Signals ........................................................................ A-3

xviii Themis Computer
RES-22XR3 Installation Manual - Configuration 3 Version 1.0