
xThemis Computer
RES-32XR3-S for X8DTL-6/6F Installation Manual
3.3.2.16 C1 Auto Demotion (Available when the
C-State Tech is enabled) ........................................................... 3-10
3.3.2.17 C3 Auto Demotion (Available when the
C-State Tech is enabled) ........................................................... 3-10
3.3.2.18 ACPI T State .............................................................................3-10
3.3.2.19 DCA Technology ...................................................................... 3-10
3.3.2.20 DCA Prefetch Delay ................................................................. 3-10
3.3.3 Advanced Chipset Control ....................................................................... 3-10
3.3.3.1 QPI Links Speed .......................................................................3-11
3.3.3.2 QPI Frequency (Available when QPI Links Speed is
set to Full Speed) ...................................................................... 3-11
3.3.3.3 QPI L0s and L1 ......................................................................... 3-11
3.3.3.4 Memory Frequency ................................................................... 3-11
3.3.3.5 Memory Mode .......................................................................... 3-11
3.3.3.6 Demand Scrubbing ................................................................... 3-11
3.3.3.7 Patrol Scrubbing ....................................................................... 3-12
3.3.3.8 Channel Interleave/Bank Interleave .......................................... 3-12
3.3.3.9 Throttling - Closed Loop / Throttling - Open Loop .................. 3-12
3.3.3.10 Intel VT-d ................................................................................. 3-13
3.3.3.11 SR-IOV Support ....................................................................... 3-13
3.3.3.12 NUMA Support ......................................................................... 3-13
3.3.3.13 Intel I/OAT ............................................................................... 3-13
3.3.3.14 Active State Power Management ..............................................3-14
3.3.3.15 USB Functions .......................................................................... 3-14
3.3.3.16 USB 2.0 Controller ................................................................... 3-14
3.3.3.17 Legacy USB Support ................................................................ 3-14
3.3.4 IDE/SATA Configuration ........................................................................ 3-14
3.3.4.1 SATA#1 Configuration ............................................................. 3-14
3.3.4.2 IDE Detect Timeout (sec) ......................................................... 3-15
3.3.4.3 Primary IDE Master/Slave, Secondary IDE Master/Slave,
Third IDE Master, and Fourth IDE Master ............................... 3-15
3.3.5 PCI/PnP Configuration ............................................................................ 3-17
3.3.5.1 Clear NVRAM .......................................................................... 3-17
3.3.5.2 Plug & Play OS .........................................................................3-18
3.3.5.3 PCI Latency Timer .................................................................... 3-18
3.3.5.4 PCI IDE BusMaster .................................................................. 3-18
3.3.5.5 PCI-Express I/O Performance .................................................. 3-18
3.3.5.6 ROM Scan Ordering .................................................................3-18