Therabody SmartGoggles User manual

User Manual

Relaxation meets relief.
Product Overview
From the creators of Theragun® comes SmartGoggles, a science-backed wearable that
combines gentle heat, targeted vibration, and soothing massage with SmartSense Technology™,
which uses your biometric data to personalize your experience and maximize your results. With
three unique modes – SmartRelax, Focus and Sleep – SmartGoggles target pressure points
to ease tension, relieve eye strain, ease discomfort related to headaches and migraines, and
improve sleep quality. Pair SmartGoggles with TheraMind content in the Therabody App for an
enhanced experience.
Intended Use
SmartGoggles intend to deliver relief to the eyes and head to promote relaxation and sleep.
Combining vibration with a gentle massage increases blood circulation to the eyes, reducing eye
strain and irritation. Strengthen the connection between the mind and body with SmartGoggles.

Getting started
1. Place the device on clean, dry skin. Remove makeup, eyeglasses, and contact lenses
prior to SmartGoggles use.
2. Place SmartGoggles on your head and adjust the strap. The Therabody SmartGoggles
should perfectly align with your temples and sit comfortably on your nose bridge. The
heart rate sensor should maintain contact with your cheekbone.
3. Keep your eyes closed during the treatment. Avoid frequent movement during
treatment as it may impact heart rate tracking.Long
4. Long Press the Power Button to switch ON SmartGoggles.
5. Short Press the Power Button to toggle through the dierent modes, SmartRelax, Focus,
and Sleep.
Step 1 - Using your device

Scan the QR code to get started.
Step 2 - Download the Therabody App
SmartGoggles seamlessly integrate into the Therabody
App via Bluetooth, allowing for deeper customization and
access to TheraMind content created for SmartGoggles
See Warnings for important safety instructions
6. Short Press the Vibration Button to toggle through the three vibration patterns.
Long Press the vibration button to stop the vibration.
7. Short Press the Heating Button to toggle through the three heat settings.
Long Press the heating button to stop the heating.
8. Long press the Power Button to turn o SmartGoggles. Make sure the Battery status
LED is OFF.

Getting to know your wearable device
USB-C cable
Instruction manual
SmartGoggles device
Soft case
D

User Manual
D

SmartGoggles has three strategically designed modes,
SmartRelax, Focus, and Sleep.
Mode 1 - SmartRelax: SmartRelax promotes relaxation by gently
massaging the eye area with heat. SmartRelax’s vibration pattern
reflects your heart rate, designed to optimize relaxation quickly.
Mode 2 - Focus: Focus aids in relaxation by releasing tension between
the eyebrows. The single vibration pattery is intended to relax the mind
and aid focus while heat is delivered to the eye area.
Mode 3 - Sleep: Sleep gently massages the temples and delivers slow-
wave vibration to promote sleepiness.
SmartGoggles has two additional buttons for added customization of
the three modes, heat and vibration, each with three intensity levels.
See diagram on page next page for more details.
1. Three vibration settings ( ): low intensity, high intensity, wave
2. Three heat settings ( ): low, medium, high
Modes Overview

Power Button
Hold for 2 seconds to power on and o
Tap once when o for battery status/enabling bluetooth
Short press to toggle through Modes indicated by icons:
SmartRelax
Mode
Vibration Button
Toggle through: O, Pulse
Heat Button
Toggle through: Medium, O, High, Low
Focus
Mode
Vibration Button
Toggle through: Low, High, O, Wave
Heat Button
Toggle through: High, O, Low, Medium
Sleep Mode Vibration Button
Toggle through: High, Wave, O, Low
Heat Button
Toggle through: Low, Medium, High, O

Charging
• SmartGoggles are USB-C enabled
• SmartGoggles include a Therabody USB-C to USB-A cable.
• The USB port is located on the side of the device, behind the Power
Button.
• Ensure that the battery status LED light is OFF before charging.
• Insert the USB-C cable into the port to charge SmartGoggles.
• The battery level is displayed in the LED indicator on the battery, next to
the USB-C connector:
• Orange: low charge, Blue: mid charge, Green: fully charged.
• When charging, the LED will flash to indicate it is properly connected
and will turn solid green when complete.
Note: If using a charger from a third party, ensure that it is from a certied
manufacturer and has not suered any structural damage. Do not try to use
the device while charging.

Cleaning Instructions:
1. To clean, wipe the inner fabric of your SmartGoggles with a non-abrasive, lint-free cloth.
2. Lightly dampen a non-abrasive, lint-free cloth with water or an alcohol-based solution to
clean if necessary.
3. Dry SmartGoggles with a non-abrasive, lint-free cloth.
4. SmartGoggles are NOT waterproof or machine washable. Do not allow excess liquids or
water to enter the product.

@Therabody
VK