THERAGUN RecoveryAir User manual

RecoveryAir™ Pneumatic Device
Quick Start Guide
Distributed by: Theragun Inc.,
1515 W. Wardlow Rd. Long Beach, CA 90810
www.therabody.com

Scan the QR code to get started.
Pour commencer, numérisez le codeQR.
Para comenzar, escanee el código de respuesta rápida (Quick Response, QR).
Scannen Sie den QR-Code und legen Sie los.
Scanner le QR code pour démarrer.
Eettua la scansione del codice QR per cominciare.
Escanee el código QR para empezar.
Scan de QR-code om aan de slag te gaan.
Zeskanuj kod QR, aby rozpocząć.
Σαρώστε τον κωδικό QR για να ξεκινήσετε.
Skann QR-koden for å komme i gang.
Skenirajte QR kôd da biste počeli.
Skanna QR-koden för att komma igång.
QR kodunu tarayarak başlayın.
Realize a leitura do código QR para começar.
Отсканируйте QR-код, чтобы начать.
.    
扫描二维码 开始。
掃描 QR 碼開始使用。
시작하시려면 QR 코드를 스캔하십시오.
QRコードをスキャンして 始めましょう。

Get the most out of your RecoveryAir
Pneumatic Device
See Warnings insert for important
safety instructions
Battery Status
Time button
Air outlet
Start/Stop button
Use to start or stop a massage. To pause a
massage, press start/stop and hold for 3
seconds. Press start/stop again to resume.
Status indicator
Power is on
Pressure knob
Light - 20 to 30 mmHg
Medium - 40 to 60 mmHg
Intense - 70 to 100 mmHg
Error indication
Massage in progress

Using the RecoveryAir Pneumatic Device
1. Place the RecoveryAir Pneumatic Device on a flat stable surface
and insert the DC power adapter cable into the DC adapter socket
on the device.
2. Put on the garment.
3. Connect the garment hoses to the RecoveryAir Pneumatic Device
by holding the device handle with one hand while connecting or
disconnecting the hose bundle with your other hand.
4. Set massage pressure by pressing and holding the Pressure Knob
while setting the desired pressure. Recommended pressure for
rst time users is 40mmHg.
5. Press the Time button to set the massage time by 15min, 30min,
45min, 60min or continuous mode.
6. Select the Hold Time by holding down the Time button
7. Start the massage
• Short hold - press for three sec. (1 beep)
• Medium hold - press for three more secs. (2 Beeps)
• Long hold - press for three more secs. (3 Beeps)

Charging the RecoveryAir Pneumatic Device
• Turn On the Power Switch to enable charging the battery
• Turn O the Power Switch to conserve battery power when not
charging or not using the RecoveryAir Pneumatic Device
• Battery level is continuously displayed by the battery status
indicators
Battery Status Displayed Icon
Constant bars 100%
75%
50%
25%
Almost empty
Empty
Constant bars
Constant bars
Constant bars
Blinking bar
No bars
Available Power

Air Outlet
Blocker Plug
Cleaning InstructionsStorage and Transportation
Connects the garment hoses to the
RecoveryAir Pneumatic Device.
Use Blocker Plug when only one
garment is in use.
1. Wipe clean using a slightly damp cloth.
2. Do not allow any moisture or liquids to
enter the RecoveryAir Pneumatic Device.
1. Keep the RecoveryAir Pneumatic Device, hoses
and garments away from direct sunlight.
2. Store in a dry, shaded place.
3. Do not twist or fold the garment hoses.
4. Store the power cord lightly wrapped and secured.