Thermaltake VD6000BNS User manual

C 2006 Thermaltake TechnologyCo.,Ltd. All Rights Reserved.
User Manual
VD6000 SERIES

Contents
Chapter l Product Introduction
1.1 Specification
Chapter 2 Case Mechanical Operation
2.1 How to open the side panel
2.2 Front fan Installation (Optional)
2.3 Installing 5.25" device
2.4 PCI slot tool-free function operation
2.5 Installing 3.5" HDD
2.6 Installing 3.5" device
Chapter 3 Motherboard & Leads Installation
3.1 Motherboard installation
3.2 Case LED connections
2
3
4
5
7
8
9
11
12
Chapter 4 Other
TM
4.1 Purepower power supply(optional) 15
3.3 USB2.0 & IEEE1394 Firewire connection 13
3.4 Audio connections 14

VD6000BNS >>>
Features
6.15 kgNet Weight
Micro ATX , Standard ATX
Front (Intake) : 120 x 120 x 25 mm (optional)
Rear (Exhaust) : 120 x 120 x 25 mm, 1300rpm,
17dBA
410 x 190 x 510 mm
Black
Case Type
7Expansion Slots
Motherboards
Color
SECC Japanese steelMaterial
10
4 x 5.25 , 2 x 3.5
4 x 3.5
Drive Bays
- Accessible
- Hidden
Cooling System
Dimension
(H*W*D)
Model
§
§
§
§
§
§
Features
Net Weight
Micro ATX , Standard ATX
Front (Intake) : 120 x 120 x 25 mm (optional)
Rear (Exhaust) : 120 x 120 x 25 mm, 1300rpm,
17dBA
Black
Middle TowerMiddle TowerCase Type
7Expansion Slots
Motherboards
Color
SECC Japanese steelMaterial
10
4 x 5.25" , 2 x 3.5"
4 x 3.5"
Drive Bays
- Accessible
- Hidden
Cooling System
Dimension
(H*W*D)
Model
1.1 Specification
Chapter l Product Introduction
12
VD6000BNS
Simple and elegant
Piano-Mirror coating
Dual USB 2.0,IEEE 1394 Firewire,
HD Audioports
Tool-freeinstallation for all drive bays &
add-on cards
High efficiency ventilation:12cm silent
fan in rear(front 12cm fan is optional)
Side air ductfor superior thermal efficiency

Chapter2 Case Mechanical Operation
2.1 How to open the side panel 2.2 Front Fan Installation (Optional)
uTo remove the side
panel, please remove
upper and bottom
screws on the back
of the case.
Push the bottom then swing out the side panel.
ŒRemove the front panel first.
wSecure the fan by screws.
xFront fan installation completed.
•Place the fan as shown.
34
Please find the side
panel key in the back
of the chassis,and
open the side panel
as shown below.
Make sure the side
panel lock is opened.
23
4

2.3 Installing 5.25" Device
ŒRemove the front panel.
•Remove the 5.25" drive
bay metal cover.
‘Place 5.25" device into
the drive bay.
’Put back the lock device and turn lock device clockwise to lock.
“5.25" device installation complete.
•Turn lock device counterclockwise to unlock.
•Remove lock device.
56
•Unscrew the 5.25"
drive bay cover.
ŽRemove the 5.25"
drive bay cover.

2.4 PCI slot tool-free function operation
ŒOpen the plasticclip then takeoff the PCI bracket.
2.5 Installing 3.5" HDD
uTurn lock device counter-clockwise to unlock.
vRemove lock device. wPlace HDD into the drive bay.
78
Put back the lock device and turn lock device clockwise to
secure the HDD.
4

ŽTurn lock device counter-clockwise to unlock.
•Remove lock deviceand insert drivefrom the front of
the chassis.
•
2.6 Installing 3.5" device
ŒRemove the front panel. •Remove the 3.5" drive
bay cover .
3.5" device installation complete.
910
Insert lock device and turn clockwise to secure the drive.
6

Each motherboard has different standoff layout. It is highly
suggested that you refer to your motherboard's manual when
installing motherboard into the Case. The cases are applicable with
Standard ATX, Micro ATX motherboards.
Your motherboard may require a special I/O Panel, which should be
included with your motherboard.
Placement Direction:
When installing the motherboard, make sure you follow the direction
provided by your motherboard manufacturer. On most standard
motherboards, the edge with external ports goes to the rear part of the
chassis. It is highly recommended that you install CPU, heat sink and
modular components before fixing the motherboard inside the chassis.
3.1 Motherboard Installation
= the locationsof
the screw holes. Note
these locations and
place included
standoffs on thechassis
first.
This side towards
the rear ofthe
chassis
Above illustration isa sample of what
the motherboard's layout.For more
detail screw holeplacement, please
refer to yourmotherboard manual.
Chapter3 Motherboard & Leads Installation
On the front of the case, you can find some LEDs and switch
leads (POWER SW*1, POWER LED*1, H.D.D. LED*1,
RESET SW*1, SPEAKER*1).
Please consult user manual of your motherboard manufacturer,
then connect these leads to the panel header on the
motherboard. These leads are usually labeled; if not, please
trace them back to the case front to find out their source.
- POWER LED connects to your M/B at the PLED
- POWER SW connects to the PWR connector on the
motherboard.
- H.D.D LED connects to the 2-pin labeled HDD LED
connector.
- RESET SW connects to the RSW connector on the
motherboard,
- SPEAKER connector: find out the 4-pin labeled SPEAKER
on the M/B then connect it.
3.2 Case LED connections
11 12

3.3 USB2.0 & IEEE1394 Firewire connection
IEEE1394 Firewire connection
Please consult your motherboard manual to find
out the section of "USB connection".
Please consult your motherboard manual to find
out the section of "IEEE1394 Firewire connection".
USB connection
3.4 Audio connections
13 14
IEEEE1394
USB
Please refer to the following illustration
of Audio connector and your motherboard
user manual.
Please select the motherboard which used AC'97 or HD Audio (Azalia),
(be aware of that your audio supports AC'97 or HD Audio (Azalia)) or
it will damage your device(s).
On some motherboards, the connectors for Audio are not the same as
the drawing below. Please check with your motherboard manual before
installing.
+D 2
-D 2
VCC 2
GROUND
+D 1
GROUND
-D 1
VCC 1
R-OUT
R-RET
L-OUT
L-RET
MIC POWER
MIC IN
GROUND
VP
TPB+
TPA+
GROUND
GROUND
TPB-
TPA-
PORT2 R
SENSE2_RETURN
SENSE_SEND
PORT1 R
PORT1 L
SENSE1_RETURN
GND
PORT2 L
AUDIO AZALIA AUDIO AC'97

TM
The Thermaltake Silent Purepower specification meets Intel
Pentium 4 and AMD K7; it offers plenty of functions, which mainly
include:
TM
4.1 Purepower power supply (optional)
4.Over current protection.
3.Over voltage protection / Under voltage protection.
2.Short circuit protection on all output.
oo
1.Over thermal protection at 100 C-105 C
TM
The functions can assure the Silent Purepower meet the balance in
TM
noise control and heat exhausted. The Silent Purepower provides
complete protection function as follow:
2.Ultra Silent:Ball bearing fans with high reliability and super low
acoustic noise under all load condition.
TM
1.Automatic Fan Speed Control: The Silent Purepower power
supply can detect the inside heat and automatically adjust the fan
speed to provide adequate airflow.
Chapter4 Other
Besides, Thermaltake enables the quality assurance of the Silent
TM
Purepower : 100% Hi-POT and ATE Function Test, 100% Burn-In and
AC Input cycled on/off under high temperature condition. Furthermore,
it has been approved by UL, CSA, TUV, VDE, NODIC, CB, FCC, CE,
CNS.
There are three main products of Thermaltake PSU, it is divided into
standard, VR and specialty power supply unit. Please refer to
http://www.thermaltake.com/purepower/main.htm
15 16