Thermaltake EPS 12V 2.91 User manual

TR2 RX 700W
A T X 1 2 V 2 . 3 & E P S 1 2 V 2 . 9 1 V e r s i o n
TR2 RX 700W
A T X 1 2 V 2 . 3 & E P S 1 2 V 2 . 9 1 V e r s i o n
www.thermaltake.com
TR2 RX 700W
ATX 12V 2.3 & EPS 12V 2.91 Version
W0366RU_TR2 RX 700W_Manual
090706
Serena
12 157

TR2 RX 700W
A T X 1 2 V 2 . 3 & E P S 1 2 V 2 . 9 1 V e r s i o n
TR2 RX 700W
A T X 1 2 V 2 . 3 & E P S 1 2 V 2 . 9 1 V e r s i o n
Table of contents
01. Warnings & Caution -----------------
02. Components Check ------------------
03. Power Connector Introduction ------
04. Installation Steps -------------------
05. Product Features ---------------------
06. Output Specification -----------------
07. Total Protection ----------------------
08. EMI & SAFETY ------------------------
09. Environments -------------------------
10. Trouble Shooting ---------------------
01
02
03
04
05
06
06
07
07
08

TR2 RX 700W
A T X 1 2 V 2 . 3 & E P S 1 2 V 2 . 9 1 V e r s i o n
TR2 RX 700W
A T X 1 2 V 2 . 3 & E P S 1 2 V 2 . 9 1 V e r s i o n
1. Do not unplug the AC power cord when the power supply is in
use. Doing so may cause damage to your components.
2. Do not place the power supply in a high humidity and/or
temperature environment.
3. High voltages exist in the power supply. Do not open the
power supply case unless you are an authorized service
technician or electrician. Doing so will void the warranty.
4. PSU should be powered by the source indicated on the rating
label.
5. All warrantees and guarantees will be voided, if failure to
comply with any of the warnings and cautions covered in this
manual.
1. Warnings and Caution 2. Components Check
TR2 RX power supply unit
User manual
AC power cord
Mounting screw x 4
01 02

TR2 RX 700W
A T X 1 2 V 2 . 3 & E P S 1 2 V 2 . 9 1 V e r s i o n
TR2 RX 700W
A T X 1 2 V 2 . 3 & E P S 1 2 V 2 . 9 1 V e r s i o n
3. Power Connector Introduction
Note: Make sure that your system is turned off and unplugged. Disconnect
the AC power cord from your old power supply.
2. Install the PSU into the case with the four screws provided.
4.1 For motherboard that
requires a single 4pin
auxiliary (CPU) power
connector, please use the
4pin ATX connector from
the power supply.
4. Installation Steps
3. Connect the 24 pin Main Power Connector to your
motherboard and peripheral. If your motherboard uses a 20-
pin connector, detach the 4-pin attachment on the 24-pin
connector.
Note: The detachable 4-pin section cannot be used in place of
a 4-pin +12V connector.
1. Open your computer case; please refer to the direction in your
case manual.
4.2 For motherboard that requires a single 8pin EPS connector,
please use the 8pin EPS connector from the power supply.
5. Connect other peripheral power connectors to devices such as
hard drives, optical drives, etc.
6. Close your computer case and connect the AC power cord to
the power supply AC inlet.
Connector Type Connectors & Cable length
1 x 20+4pin Main connector
(500mm)
MODEL
03 04
Main
Power
Connec tor
(20+4P in)
ATX 12V
(4P in)
EPS 1 2V
(8P in)
1 1 1 1 2 6 6 1 1 1
Model
Cable
W0366
700W
20+4pin
EPS 12V 8 pin + ATX 12V 4pin
Molex & FDD
SATA
PCI-E 8pin
PCI-E 6pin
PCI-E 8pin to 6pin adapter
CPU 4pin to 4pin adapter
700W
3
(500mm + 150mm + 150mm + 150mm)
x Peripheral & 1 x FDD connectors
3
(500mm + 150mm + 150mm)
x Peripheral connectors
1 x EPS 12V 8 pin + ATX 12V 4pin connector
( )500mm+150mm
3 x S-ATA connectors
(500mm + 150mm + 150mm)
3 x S-ATA connectors
(500mm + 150mm + 150mm)
1
(500mm)
x 8pin PCI-E connector
2 x 6pin PCI-E connectors
( )500mm+150mm
1 x 8pin to 6pin adapter
(150mm)
1 x 4pin to 4pin adapter
(150mm)
PCI-E
(8P in)
PCI-E
(6P in)
SATA
(5P in)
Peripheral
(4Pin)
FDD
(4P in)
PCI-E
8Pi n
to 6P in
CPU 4 Pin
to 4P in

TR2 RX 700W
A T X 1 2 V 2 . 3 & E P S 1 2 V 2 . 9 1 V e r s i o n
TR2 RX 700W
A T X 1 2 V 2 . 3 & E P S 1 2 V 2 . 9 1 V e r s i o n
5. Product Features
- Fully complies with latest Intel ATX 12V V2.3 for utmost stable
and robust power delivery system.
- Universal Input & Active PFC:100-240VAC input with automatic
adjustment and active PFC for global usage.
- Dedicated dual +12V rails ensures efficient power delivery to
critical components within the PC.
- Modularized cable management dramatically improves internal
airflow to enable quieter running computer system and
computing experience.
- Oversized & ultra-quiet 140mm ball bearing fan accelerates heat
removal and decreases overall noise output.
- Latest 6pin and 8pin PCI-Express power connectors to support
advanced graphic cards in Nvidia SLI or ATI CrossFire X
technology.
- Supports all Intel & AMD processors.
- High reliability: MTBF>100,000 hours.
- Protections: Over Current, Over Voltage and Short Circuit
Protection.
- Safety / EMI Approvals: UL, TUV, FCC, CE, BSMI and GOST
certified.
- Dimension (W/H/D): 150mm x 86mm x 160mm.
6. Output Specification
100V-240V 10A-5A 50Hz-60Hz
Model
700W
05 06
AC INPUT
DC OUTPUT
Max Output Current
Min Output Current
+3.3V +5V +12V1 +12V2 -12V +5Vsb
24A 15A 30A 22A 0.3A 2.5A
0.5A 0.5A 0.5A 0.5A 0A 0.05A
The +5V and +3.3V Max-combined power is 130W.
* Over Voltage Protection
* Over Current Protection
The power supply should provide OCP and should shutdown
before 240VA of each output power (included +5V, +3.3V).
*
Activated when any DC rails short circuited.
Short Circuit Protection
7. Total Protection
Voltage Source Protection Point
+3.3V +4.5V Max.
+5V
+15.6V Max.
+12V
+7.0V Max.

TR2 RX 700W
A T X 1 2 V 2 . 3 & E P S 1 2 V 2 . 9 1 V e r s i o n
TR2 RX 700W
A T X 1 2 V 2 . 3 & E P S 1 2 V 2 . 9 1 V e r s i o n
10. Trouble-Shooting
If the power supply fails to function properly, please follow the
troubleshooting guide before application for service:
www.ther m a ltake.com
1. Is the power cord plugged properly into electrical outlet and
into the power supply AC inlet?
2. Please make sure the "I/O" switch on the power supply is
switched to "I" position.
3. Please make sure all power connectors are properly
connected to all the devices.
4. If connected to a UPS unit, is the UPS on and plugged in?
If the power supply is still unable to function properly after
following the above instruction, please contact you local store
or Thermaltake branch office for after sales service. You may
also refer to Thermaltake's website for more technical
support:
9. Environments
Operating temperature
Operating humidity
MTBF
o o
10 C to + 25 C
20% to 85%, relative humidity
> 100,000 hours
07 08
8. EMI & SAFETY
UL, TUV, FCC, CE, BSMI and GOST.
W0366 TR2 RX 700W
EMI Regulatory & SAFETY Standards