Thermaltake Litepower 400W User manual

>> >>>> >>
Litepower 400W PSU Litepower 400W PSU
ATX12V 2.0 Version ATX12V 2.0 Version
Thermaltake Litepower Power SupplyThermaltake Litepower Power Supply
User's M anual >>
Thermaltake Litepower 400W Power Supply
Litepower 400W
ATX 12V 2.0 Version
www.thermaltake.com [email protected]
Power Supply
170 X 140 mm170 X 140 mm
W0161_Litepower_400W_ _A07022701

>> >>>> >>
Litepower 400W PSU Litepower 400W PSU
ATX12V 2.0 Version ATX12V 2.0 Version
Thermaltake Litepower Power SupplyThermaltake Litepower Power Supply
Table of contents
1. Introduction ------------------------------------
2. Components Check -----------------------
3. Installation
3.2 Installation Steps ------------------------
4. Product
Specification
4.1 Output Specification ---------------------
5. ----------------------------
Trouble Shooting
01
02
03
04
05
08
10
11
11
4.3 Other Specification --------------------- -
4.4 Protection --------------------------------
4.5 Environments -----------------------------
13
3.1 Warrings and Cautions ------------------
4.2 Litepower 400W Power Supply -----
11
12
4.6 Hi-Pot:(Input/Output isolation) --------
4.7 EMI & Safety -----------------------------
170 X 140 mm170 X 140 mm
W0161_Litepower_400W_ _A07022701

>> >>>> >>
Litepower 400W PSU Litepower 400W PSU
ATX12V 2.0 Version ATX12V 2.0 Version
Thermaltake Litepower Power SupplyThermaltake Litepower Power Supply
We live up to the promise of Thermaltake logo in
our unending quest for excellence.
Shall you have any suggestion or comments,
please access our web site :
http://www.thermaltake.com
or e-mail to :
[email protected]
we appreciate your kindly feedback and you will
receive the prompt response from our customer
service team.
Thank you for choosing a quality Thermaltake Litepower
400W PC Power Supply. We trust that you will find it
providing you with many years of service.
You can always find a Thermaltake Litepower 400W PC
Power Supply that is suitable for all of your modern PC
power needs.
Please take the time in familiarize yourself with the power
supply, its connectors and the contents of this manual
before proceeding with the installation of the power unit.
You will need a Phillips crosshead screwdriver, perhaps
your PC case manual and most certainly your
motherboard manual.
1. Introduction
One AC Input
power cord
7
1
4 mounting screws
7
User manual
7
2. Components Check
01 02
Litepower
400W power
supply unit
170 X 140 mm170 X 140 mm
W0161_Litepower_400W_ _A07022701

>> >>>> >>
Litepower 400W PSU Litepower 400W PSU
ATX12V 2.0 Version ATX12V 2.0 Version
Thermaltake Litepower Power SupplyThermaltake Litepower Power Supply
3.1.1 Do not pull the AC power cord when the power supply is in
use or else damage to components will result.
3.1.2 Do not store the Power Supply in a high humidity and high
temperature environment.
3.1.3 When using power supply under testing
conditions where the power supply unit is not installed in a
PC with its components, please follow the steps below:
1)Please take a paper clip and untwist it.
2)Make sure the power supply unit is in the "OFF" position.
3)Locate the 20 or 24 pin motherboard connector from the
power supply unit.
4)Plug one side of the paper clip into the green wire hole.
5)Plug the other side of the paper clip into any of the black
wire holes.
6)Turn on the PSU to see if the power supply fans turn on.
3.1.4 High voltages exist in the power supply. Do not open the
power supply case unless you are an authorized service
technician or electrician.
3.1.5 All warrantees and guarantees shall be voided should there
be a failure to comply with any of the warnings and cautions
covered in this manual.
Litepower 400W
3 Installation
3.1 Warnings and Cautions
To prevent electrical shocks, please disconnect the power cord
from your existing power supply unit. Before you install your new
Litepower 400W power supply, please check the red power supply
voltage switch setting. You need to match your local power
voltage(115V use for North America, Japan, etc., 230V use for
Europe, South Africa, and other countries). If you don't use the
proper voltage setting, you may damage your system and void the
warranty. Litepower 400W PSU has voltage selector which can
change to 115V/230V.
Installation Steps
3.2.1 Disconnect the power cord from your old power supply.
3.2.2 Follow your computer case manual and disassemble the case.
3.2.3 Disconnect all the power connectors from the motherboard
and from the peripheral devices such as case fans, hard drives,
floppy drives. etc.
3.2.4 Remove the existing power supply from your computer case
and replace it with your new Thermaltake Litepower 400W PSU.
3.2.5 Connect the power connectors to the motherboard and
peripheral devices (refer to the rest of this manual to match the
various one-way key-locked connectors to the motherboard
and accessories).
3.2.6 Connect the 6-pin PCI Express connector to PCI Express
graphic card if you need.
Note: Please read the user manual supplied with your graphic card
for detail usage instructions.
3.2.7 Close the computer case.
3.2.8 Make sure your power supply switch is on "OFF" position,
and connect the supplied power cord to your Thermaltake PSU.
3.2 Installation Steps
03 04
170 X 140 mm170 X 140 mm
W0161_Litepower_400W_ _A07022701

>> >>>> >>
Litepower 400W PSU Litepower 400W PSU
ATX12V 2.0 Version ATX12V 2.0 Version
Thermaltake Litepower Power SupplyThermaltake Litepower Power Supply
PCI Express connector (6pin)
Main Power Connector
12
11
10
9
8
7
6
5
4
3
2
1
24
23
22
21
20
19
18
17
16
15
14
13
Voltage
+3.3 V
+3.3 V
COM
+5 V
COM
+5 V
COM
PWR_ON
+5 Vsb
+12 V
+12 V
+3.3 V
Voltage
+3.3 V
-12 V
COM
PS_ON#
COM
COM
COM
N/C
+5 V
+5 V
+5 V
COM
Color
Orange
Orange
Black
Red
Black
Red
Black
Purple
Yellow
Yellow
Orange
Color
Orange
Blue
Black
Green
Black
Black
Black
N/C
Red
Red
Red
Black
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
Color Signal Pin
Yellow 12VDC 1
Yellow 12VDC 2
Yellow 12VDC 3
Black COM 4
Black COM 5
Black COM 6
Gray
4.1 Output Specification
4. Product Specification
Floppy disk connector (4pin)
Peripheral connector (4 pin)
+12V connector(4 pin)
1
4
05 06
Color Signal Pin
Black COM 1
Black COM 2
Yellow 12VDC 3
Yellow 12VDC 4
Color Signal Pin
Yellow +12VDC 1
Black COM 2
Red +5VDC 4
Black COM 3
Color Signal Pin
Yellow +12VDC 4
Black COM 2
Red +5VDC 1
Black COM 3
170 X 140 mm170 X 140 mm
W0161_Litepower_400W_ _A07022701

>> >>>> >>
Litepower 400W PSU Litepower 400W PSU
ATX12V 2.0 Version ATX12V 2.0 Version
Thermaltake Litepower Power SupplyThermaltake Litepower Power Supply
12cm Fan Design - Optimum
Air flow and Lowe Noise
- Intel ATX 12V 2.0 Compatible.
- 6-pin PCI-E connector included to support high-end graphic card.
- Dual +12V output circuit provides steady output for system.
- Super quiet and stable 12cm sleeve bearing fan.
- Build-in Over Current Protection, Over Voltage protection, and
Short-Circuit protection.
- Safety : UL, CUL, CE, NEMKO,
TUV+CB, BSMI, FCC
certification. Silver
Color
10ms(minimum) at Full Load
115 VAC / 230 VAC
INPUT
Input Voltage
Input
Frequency
Range
Input Current
Hold-up Time
Net Weight
PFC
PFC (Power
Factor
Correction)
400 Watts
Maximum Power
SPECIFICATION
14cm(L)x15cm(W)x8.6cm(H)
Unit Size
DIMENSIONS
Over Voltage
Protection
Recycle AC to
Reset
P. G. Signal
Cooling System
Switches
10.0A / 5.0A
INPUT
-
DIMENSIONS
P/N W0161
1.32 kg
One 12cm Fan:
SPEED : 2400 RPM(+/-10%)
DIMENSION : 120 x 120x 25 mm
AIR FLOW: 77.5 CFM
TEMP. AUTOCONTROL
+5V output: 7.0 Vmax
+3.3V output: 4.5 Vmax
+12V output: 15.6 Vmax
ATX Logic on-offadditional
power rocker switch
50 / 60 Hz
Yellow +12VDC 1
Black COM 2
Red +5VDC 3
Black COM 4
Orange +3.3VDC 5
Color Signal Pin
Serial ATA Power Connector Features:
4.2 Litepower 400W SpecificationPSU
0807
100-500 ms
W0162
N/A
1.30 kg
170 X 140 mm170 X 140 mm
W0161_Litepower_400W_ _A07022701

>> >>>> >>
Litepower 400W PSU Litepower 400W PSU
ATX12V 2.0 Version ATX12V 2.0 Version
Thermaltake Litepower Power SupplyThermaltake Litepower Power Supply
20+4-pin
Main Connector
4-pin
+12V Power
Connector
4-pin
Peripheral Power
Connector
4-pin
Floppy Drive
Connector
6-pin
PCI Express
Connector
Total Output Connector
X1 X1 X6 X1 X2
5-pin
SATA Connector
Technology Features
X1
12 cm Fan - High
thermal performance
70
mV
70
mV
70
mV
+5 V +3.3 V +12 V -12 V +5 VSB
25 A 18 A 14 A 16 A 0.3 A 2.5 A
0.5 A 1.0 A0.3 A 1.0 A 0.0 A 0.1 A
+5% ~ -5% +5% ~ -5% +5% ~ -5% +5% ~ -5% +10% ~ -10% +5% ~ -5%
150
mV
150
mV
200
mV
Min.
Load
Ripple
V(p-p)
Load
Reg.
Max.
Load
+12 V
Dual +12V Rails
6-pin PCI-Express
Connector
12
-- -- --
Peak
load
4.3 Other Specification
4.3.1 Inrush Current:
No damage at25 C cold start.
4.3.2 Power Efficiency:
65% (min.) atfull load, 115Vac and 230Vac input.
4.3.4 Hold-Up Time:
10ms (minimum) at80% of full load, at 230ACinput.
4.3.5 Power GoodDelay:
100-500 msec.
4.3.6 Power FailDelay:
>1 msec.
4.3.7 Turn-On DelayTime:
1000 msec max.
4.3.8 Rise Time:
20ms max atfull load.
4.3.9 MTBF at 25 C(demonstrated)
100KHrs minimum
4.3.3 Note:
+5V & +3.3V output can't exceed 130W
+5V, +3.3V, +12V1 & +12V2 output can't exceed 335W
Total combine current on+12V1 & +12V2 rails are 19A Max
Output power peak at 400W, rated at 350W
Add 0.1uF and 10uF capacitors across output terminal during
ripple & noise test.
1009
3.5 A16 A 18 A
170 X 140 mm170 X 140 mm
W0161_Litepower_400W_ _A07022701

>> >>>> >>
Litepower 400W PSU Litepower 400W PSU
ATX12V 2.0 Version ATX12V 2.0 Version
Thermaltake Litepower Power SupplyThermaltake Litepower Power Supply
4.4 Protection:
If the power supply protection (OCP, OVP, or Short Protection) latches
off all main outputs, reset the PSU by cycling remote on/off controlor
AC power.
4.4.1 Over CurrentProtection
Not over 240VA for everyoutput voltage
4.4.2 Over Voltage Protection
+3.3V output : 4.5 Vmax
+5.0V output : 7.0 Vmax
+12.0V output : 15.6 Vmax
4.4.3 Short Protection
All output to GND.
4.5 Environment:
4.5.1 Operating Temp. +10 C to +50 C
4.5.2 Storage Temp. -20 C to +60 C
4.5.3 Operating Humidity 5% to 85%, non-condensing
4.5.4 Storage Humidity 5% to 95%, non-condensing
4.5.5 Operating Altitude 0 to 10,000 feet
4.5.6 Storage Altitude 0 to 50,000 feet
4.7 EMI & Safety
4.7.1 Conducted EMI
1. Meet FCC: Class B
2. Meet CISPR 22: Class B
4.7.2 Safety Standards
1. Meet UL/CUL
2. Meet TUV
3. Meet CB
4. Meet CE
5. Meet BSMI, FIMKO, SEMKO, DEMKO
4.6 Hi-Pot: (Input/Output isolation)
4.6.1 Primary to Secondary
3535Vdc for
4.6.2 Insulation Resistance
Primary to earth ground 500Vdc, 50M ohms Min.
1 minute
1211
Note: The power supply needs to be coupled with PC system
for operation.
170 X 140 mm170 X 140 mm
W0161_Litepower_400W_ _A07022701

>> >>>> >>
Litepower 400W PSU Litepower 400W PSU
ATX12V 2.0 Version ATX12V 2.0 Version
Thermaltake Litepower Power SupplyThermaltake Litepower Power Supply
Should you have any questions regarding the
aforementioned steps, please contact Thermaltake
directly. Failure to follow the proper procedures may
cause severe bodily harm or PC component damage.
For Support or General Inquiries, please contact us at:
Thermaltake Technology USA
Toll Free: [phone]
Email: [email protected]
Thermaltake Europe B.V.
Tel:[phone]
Email: [email protected]
Thermaltake Beijing Co.Ltd.
Tel:[phone]/3189 ext.16
Email: [email protected]
Thermaltake Australia and New Zealand Pty Ltd
Tel:[phone]
Email: [email protected]
Thermaltake Japan Inc.
Email: [email protected]
1
2
3
4
5
Condition 1: No DC output. The fan or fans are motionless
Check:
1-1 Is the AC inlet plug firmly plugged intothe PSU inlet
socket?
1-2 Is the wall socket, extension power cord, power strip
or surgeprotector in use, fully functional and wall power
switch turned 'ON'?
1-3 Is the Main Board socket (20+4pin) plug fully and firmly
inserted?
Condition 2: The fan or fans began rotating and then stopped.
The system hangs without proceeding any further.
Check:
2-1 Are the peripheral connectors firmly plugged into
accessory devices, such as the main hard drive, CD ROM
, etc?
2-2 If a plug has been inadvertently connected in an off-set or
reversed position,unplug the AC power source, reconnect
the offendingconnectors and then wait for 30 seconds
before replugin the AC power source and try again.
Note:
If the power supply is still unable to power up after
following the above instruction, please send the unit back to
your dealer or retailer for after sales service.
5. Trouble Shooting
1413
170 X 140 mm170 X 140 mm
W0161_Litepower_400W_ _A07022701

>> >>>> >>
Litepower 400W PSU Litepower 400W PSU
ATX12V 2.0 Version ATX12V 2.0 Version
Thermaltake Litepower Power SupplyThermaltake Litepower Power Supply
15
NOTE:
170 X 140 mm170 X 140 mm
W0161_Litepower_400W_ _A07022701