Thermaltake TR2 RX 700w User manual

TR2 RX
Cable Management & 5 O W
power Supply
ATX 12V 2.2 Version
ip Thermaltake
Cogotall rowr LIFE
User's Manual >>
TR2 RX Cable management 850W Power Supply

[Dre menemen BEOW
ATX 12V 2.2 Version
1. Introduction --------------------------------- 1
2. Components Check ~~~ 3
3. Installation o 4
3.1 Warnings and Cautions ---------------------: 4
3.2 Embedded Socket and Modularized ------: 5
Cable Management
3.3 Installation Steps ----------------------------- 6
3.4 Power Supply Installatien ----------------- 7
4. Product Specification ----------------- 10
5. Trouble Shooting ~~ 13
6. Cable Retail Package ------------------ 14

| conte management S'5 O W
ATX 12V 2.2 Version
1 = Introduction
We live up to the promise of Thermaltake loao in
our unending quest for excellence.
Shall you have any suggestion or comments,
please access our web site :
http: //www.thermaltake.com_
or e-mail to :
[email protected]
we appreciate your kindly feedback and you will
receive the prompt response from our customer
service team.
Thank you for choosing a quality Thermaltake
TR2 RX 850W Cable Management PC Power Supply. The
TR2 RX 850W featuring our Embedded Socket and
Modularized Cable Management plus 14cm cooling fan.
We trust that you will find it providing you with many
years of service.
Independent voltage circuit
Voltage won't fluctuate and influence each rails. The
particular design for +3.3V, +5V, and +12V that offers
unflappable current delivery under heavy load and
makes voltage output more stable.
Please take the time in familiarize yourself with the
power supply, its connectors and the contents of this
manual before proceeding with the installation of the
power unit. You will need a Phillips crosshead
screwdriver, perhaps your PC case manual and most
certainly your motherboard manual.
1 Thermaltake TR2 RX Power Supply

/ = tar RO B50 Vv
ATX 12V 2.2 Version
Snould you have any questions regarding the
aforementioned steps, please contact Thermaltake directly.
Failure to follow the proper procedures may cause severe
bodily harm or PC component damage.
For Support or General Inquiries, please contact us at:
Headquarter
Thermaltake Technology Co., Ltd.
TEL: [phone] FAX: [phone]
E-MAIL: [email protected]
www.thermaltake.com
Asia Region
Japan - Thermaltake Japan Inc.
TEL: [phone] FAX: [phone]
E-MAIL: [email protected]
www.thermaltake.co.jp
China - Thermaltake Beijing Co., Ltd.
TEL: [phone] FAX: [phone]
E-MAIL: [email protected]
www.thermaltake.com.cn
Taiwan - Thermaltake Technology Co., Ltd.
TEL: [phone] FAX: [phone]
E-MAIL: [email protected]
www.thermaltake.com
Others:
Thermaltake Technology Co., Ltd.
TEL: [phone] FAX: [phone]
E-MAIL: [email protected]
www.thermaltake.com
Europe Region
Germany - Thermaltake Germany GmbH
TEL: [phone] FAX: [phone]
E-MAIL: [email protected]
www.thermaltake.de
Netherland - Thermaltake Europe B.V.
TEL: [phone] FAX: [phone]
E-MAIL: [email protected]
www.thermaltake.com
Others:
Thermaltake Europe B.V.
TEL: [phone] FAX: [phone]
E-MAIL: [email protected]
www.thermaltake.com
America Region
North/South America - Thermaltake USA Inc.
TEL: [phone] FAX: [phone]
E-MAIL: support@thermaltakeusa com
www.thermaltakeusa.com
Oceania Region
Australia - Thermaltake Australia and New Zealand Pty Ltd.
TEL: [phone] FAX: [phone]
E-MAIL: [email protected]
www.thermaltake.com.au

TR2 RX
| Cable Management B5 O UV
ATX 12V 2.2 Version
2. Components Check
850W power
supply unit
A 4-pin ATX +12V
power connector
O Two sets of wires with
4-pin floppy drive
connector ®©.
A
Two sets of wires with
5-pin SATA connectors
=
© One AC Input power cord
O An 8-pin EPS +12V
power connector
Two sets of wires with
6-pin PCI-Express power
connector
Two sets ofwires with
8-pin PCI-Express power
connector
4 mounting screws
7
a de a
> 4 KE,
a >
a
User manual
3 Thermaltake TR2 RX Power Supply

/ Mie = B50 UV
ATX 12V 2.2 Version
= = Installation
3.1 Warnings and Cautions
3.1.1 Do not pull the AC power cord when the power supply is in
use or else damage to components will result.
3.1.2 Do not store the Power Supply in a high humidity and high
temperature environment.
3.1.3 When using an ATX type power supply under testing
conditions where the power supply unit is not installed in a
PC with its components, please follow the steps below:
1)Please take a paper clip and untwist it.
2)Make sure the power supply unit is in the "OFF" position.
3)Locate the 20 or 24 pin motherboard connector from the
power supply unit.
4)Plug one side of the paper clip into the green wire hole.
5)Piug the other side of the paper clip into any of the black
wire holes.
6)Turn on the PSU to see if the power supply fans turn on.
3.1.4 High voltages exist in the power supply. Do not open the
power supply case unless you are an authorized service
technician or electrician.
3.1.5 All warrantees and guarantees shall be voided should there
be a failure to comply with any of the warnings and cautions
covered in this manual.
Thermaltake TR2 RX Power Supply 4

| Coro management 350 W
ATX 12V 2.2 Version
3.2 Embedded Socket and Modularized
Cable Management
3.2.1 Embedded Socket and Modularized Cable Management:
The new embedded socket and modularized cable management
allows user use only the cables they need and improve the airflow
in the chassis.
Embedded Socket and Modularized Cable Management Design:
8pin&4pin +12V Peripheral, Floppy 8pin&G6pin PCI-E
power connector and SATA connector connector
3.2.2 TR2 RX 850W unit: On the power supply, you will find sockets to connect
with those cables. Users can choose which wire set they want to use for
devices, graphic card, fans, etc. Inside the package, you will find the
following wire set:
. One EPS 12V 8pin CPU connector.
. One ATX 12V 4pin CPU connector.
. Eight 4-pin peripheral connectors and two 4-pin floppy drive connectors.
. Six 5-pin S-ATA connectors
. Two 6pin & two 8pin PCI-Express connectors
. Two 8pin to 6pin PCI-Express adapters. OGO AON-
5 Thermaltake TR2 RX Power Supply

TR2 RX
| Cable Management E5 O WW
ATX 12V 2.2 Version
3.3 Installation Steps
To prevent electrical shocks, please disconnect the power cord
from your existing power supply unit. TR2 RX 850W Cable
Management PSU has automatic Voltage Selector Which will
automatically change to 115V-230V PSU .
Installation Steps
3.3.1
Sade
3.3.3
3.3.4
3.3.5
3.3.6
Note:
Ground yourself to remove any static electricity by briefly
touching your PC cases and then, disconnect the power cord
from your old power supply (if replacing it)
Follow your computer case manual and disassemble the case.
Disconnect all the power connectors from the motherboard
and from the peripheral devices such as case fans, hard
drives, floppy drives. etc.
Remove the existing power supply from your computer case
and replace it with your new Thermaltake TR2 RX 850W
Cable Management PSU.
Connect the power connectors to the motherboard and
peripheral devices (refer to the rest of this manual to match
the various one-way key-locked connectors to the
motherboard and accessories).
Connect the 6-pin PCI Express connector to PCI Express
graphic card if you need.
Please read the user manual supplied with your graphic card
for detail usage instructions.
3.3.7 Close the computer case.
3.3.8
Make sure your power supply switch is on "OFF" position,
and connect the supplied power cord to your Thermaltake
TR2 RX 850W Cable Management PSU.
Thermaltake TR2 RX Power Supply 6

/ Ag) A nt man B50 lv
ATX 12V 2.2 Version
3.4 Power Supply Installation
After install the power supply unit into the chassis and then connect
the 20+4-pin main power cable to motherboard 20pin or 24 pin socket.
Connect the EPS 12V 8pin or ATX 4pin auxiliary power connector to the
motherboard. (Users can use either 4 pins or 8 pins, depending on
the motherboard. Please check with the motherboard user's manual.)
Connect the 6-pin or 8-pin PCI-Express connector to your graphics
card if necessary.
7 Thermaltake TR2 RX Power Supply

/ Ata A ene B50 UV
ATX 12V 2.2 Version
Connect the 4-pin power connectors to peripherals such as DVD
burners, hard disk drives, etc. In addition, users can connect the
4-pin floppy power connectors to the floppy drive.
If there are S-ATA hard disk drives present, there are also Serial ATA
connectors available.
The whole power supply
components inside the
Thermaltake TR2 RX Power Supply

TR2 RX
[cante management BSOW
ATX 12V 2.2 Version
e. Product Specification
IMlain Power Connector
LNW hUIDN DO
+5 ab
EE]
ESR
coio Signat]| Pin)
Casa [com [6
9 Thermaltake TR2 RX Power Supply

TRZ RX
Cable Management & 5 O UV
ATX 12V 2.2 Version
Pci-E Connector (8 pin)
(Color [Signal] Pim”
slack | com [67
[Black | com | 8,
Cru Connector (4 pin)
Support both dual core CPU and single core CPU systems motherboard
“Color [Signal] Pin]
Thermaltake TR2 RX Power Supply 10

TR2 RX
[cane management BSOUW
ATX 12V 2.2 Version
Cpu connector (8 pin)
Support the latest 8 pin Quad Core system motherboard
Color [Signal] Pin)
Yelow | av [6 |
Yellow [am | 8 )
“Color [Signal] Pin
Cred [oc 4
1 1 Thermaltake TR2 RX Power Supply

TR2 RX
cable management 8 5 O UV
ATX 12V 2.2 Version
Floppy Disk Connector (4 pin)
[Color [Signal] Pin
Crea [eswc] a |
(Color | Signal | Pin |
stack | com | 2
8 pin PCI-E to 6-pin PCI-E adapter
8-pin PCI-E connector is able to use for 6-pin PCI-E
connector graphic card by the adapter.
| Thermaltake TR2 RX Power Supply 12

TR2 RX
| Cable Management B 5 O UV
ATX 12V 2.2 Version
5. Trouble Shooting
13
Condition 1:
No DC output. The fan or fans are motionlessCheck:
1-1 Is the AC inlet plug firmly plugged into the PSU inlet
socket?
1-2 Is the wall socket, extension power cord, power strip
or surge protector in use, fully functional and wall power
switch turned 'ON'?
1-3 Is the Main Board socket (24pin) plug fully and firmly
inserted?
Condition 2:
The fan or fans began rotating and then stopped. The system
hangs without proceeding any further.
Check:
2-1 Are the peripheral connectors firmly plugged into
accessory devices, such as the main hard drive, CD ROM
, etc?
2-2 If a plug has been inadvertently connected in an off-set or
reversed position, unplug the AC power source, reconnect
the offending connectors and then wait fdr 30 seconds
before replug in the AC power source and try again.
Note:
If the power supply still cannot or is still unable to power up
after following the above instruction, please send the unit back
to your dealer or retailer for after sales service.
Thermaltake TR2 RX Power Supply