Thermaltake TR2 User manual

>> >>>> >>
TR2 1000W PSU TR2 1000W PSU
ATX12V 2.2 & EPS 12V 2.91 Version
Thermaltake TR2 Power SupplyThermaltake TR2 Power Supply
ATX12V 2.2 & EPS 12V 2.91 Version
User's Manual >>
Thermaltake TR2 1000W Power Supply
TR2 1000W
ATX 12V 2.2 Version& EPS 12V 2.91
www.thermaltake.com [email protected]
www.tr2tt.com [email protected]
170 X 140 mm170 X 140 mm
W0176_TR2_1000W_ _A07102201

>> >>>> >>
TR2 1000W PSU TR2 1000W PSU
ATX12V 2.2 & EPS 12V 2.91 Version
Thermaltake TR2 Power SupplyThermaltake TR2 Power Supply
ATX12V 2.2 & EPS 12V 2.91 Version
6. Cable Retail Package -----------------------
Table of contents
1. Introduction ------------------------------------
2. Components Check -----------------------
3. Installation
3.2 Installation Steps ------------------------
4. Product
Specification
4.1 Output Specification ---------------------
5. ----------------------------
Trouble Shooting
01
02
03
04
05
09
11
12
12
15
4.3 Other Specification --------------------- -
4.4 Protection --------------------------------
4.5 Environments -----------------------------
13
3.1 Warrings and Cautions ------------------
4.2 TR2 1000W Power Supply --------------
12
4.6 EMI & Safety -----------------------------
170 X 140 mm170 X 140 mm
W0176_TR2_1000W_ _A07102201

>> >>>> >>
TR2 1000W PSU TR2 1000W PSU
ATX12V 2.2 & EPS 12V 2.91 Version
Thermaltake TR2 Power SupplyThermaltake TR2 Power Supply
ATX12V 2.2 & EPS 12V 2.91 Version
We live up to the promise of Thermaltake logo in
our unending quest for excellence.
Shall you have any suggestion or comments,
please access our web site :
http://www.thermaltake.com
http://www.tr2tt.com
or e-mail to :
[email protected]
[email protected]
we appreciate your kindly feedback and you will
receive the prompt response from our customer
service team.
Thank you for choosing a quality Thermaltake TR2 1000W
PC Power Supply. We trust that you will find it providing
you with many years of service.
You can always find a Thermaltake TR2 1000W PC Power
Supply that is suitable for all of your modern PC power
needs.
Please take the time in familiarize yourself with the power
supply, its connectors and the contents of this manual
before proceeding with the installation of the power unit.
You will need a Phillips crosshead screwdriver, perhaps
your PC case manual and most certainly your
motherboard manual.
1. Introduction
One AC Input power cord
7
1
4 mounting screws
7
User manual
7
1000W power
supply unit
2. Components Check
01 02
1000W
170 X 140 mm170 X 140 mm
W0176_TR2_1000W_ _A07102201

>> >>>> >>
TR2 1000W PSU TR2 1000W PSU
ATX12V 2.2 & EPS 12V 2.91 Version
Thermaltake TR2 Power SupplyThermaltake TR2 Power Supply
ATX12V 2.2 & EPS 12V 2.91 Version
3.1.1 Do not pull the AC power cord when the power supply is in
use or else damage to components will result.
3.1.2 Do not store the Power Supply in a high humidity and high
temperature environment.
3.1.3 When using power supply under testing
conditions where the power supply unit is not installed in a
PC with its components, please follow the steps below:
1)Please take a paper clip and untwist it.
2)Make sure the power supply unit is in the "OFF" position.
3)Locate the 20 or 24 pin motherboard connector from the
power supply unit.
4)Plug one side of the paper clip into the green wire hole.
5)Plug the other side of the paper clip into any of the black
wire holes.
6)Turn on the PSU to see if the power supply fans turn on.
3.1.4 High voltages exist in the power supply. Do not open the
power supply case unless you are an authorized service
technician or electrician.
3.1.5 All warrantees and guarantees shall be voided should there
be a failure to comply with any of the warnings and cautions
covered in this manual.
TR2 1000W
3 Installation
3.1 Warnings and Cautions
3.2.1 Disconnect the power cord from your old power supply.
3.2.2 Follow your computer case manual and disassemble the case.
3.2.3 Disconnect all the power connectors from the motherboard
and from the peripheral devices such as case fans, hard drives,
floppy drives. etc.
3.2.4 Remove the existing power supply from your computer case
and replace it with your new Thermaltake TR2 1000W PSU.
3.2.5 Connect the power connectors to the motherboard and
peripheral devices (refer to the rest of this manual to
match the various one-way key-locked connectors to the
motherboard and accessories).
3.2.6 Connect the 6pin or 8pin PCI-E connector to PCI Express
graphic card if you need.
Note: Please read the user manual supplied with your graphic card
for detail usage instructions.
3.2.7 Close the computer case.
3.2.8 Make sure your power supply switch is on "OFF" position,
and connect the supplied power cord to your Thermaltake
TR2 1000W PSU.
3.2 Installation Steps
03 04
170 X 140 mm170 X 140 mm
W0176_TR2_1000W_ _A07102201

>> >>>> >>
TR2 1000W PSU TR2 1000W PSU
ATX12V 2.2 & EPS 12V 2.91 Version
Thermaltake TR2 Power SupplyThermaltake TR2 Power Supply
ATX12V 2.2 & EPS 12V 2.91 Version
PCI-E Connector (6 pin)
Main Power Connector
12
11
10
9
8
7
6
5
4
3
2
1
24
23
22
21
20
19
18
17
16
15
14
13
Voltage
+3.3 V
+3.3 V
COM
+5 V
COM
+5 V
COM
PWR_ON
+5 Vsb
+12 V
+12 V
+3.3 V
Voltage
+3.3 V
-12 V
COM
PS_ON#
COM
COM
COM
N/C
+5 V
+5 V
+5 V
COM
Color
Orange
Orange
Black
Red
Black
Red
Black
Purple
Yellow
Yellow
Orange
Color
Orange
Blue
Black
Green
Black
Black
Black
N/C
Red
Red
Red
Black
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
Color Signal Pin
Yellow +12V 1
Yellow +12V 2
Yellow +12V 3
Black COM 4
Black COM 5
Black COM 6
Gray
4.1 Output Specification
4. Product Specification
05 06
PCI-E Connector (8 pin)
Color Signal Pin
Yellow
Yellow
Yellow
Black
Black
1
2
3
4
5
6
Black COM
COM
Black
7
8
COM
COM
COM
Black
CPU Connector (4+4 pin)
4
3
2
1
5
6
7
8
Color Signal Pin
Black
Black
Black
Yellow
Yellow
Yellow
COM
COM
COM
1
2
3
4
5
6
Black COM
+12V
Yellow
7
8
+12V
+12V
+12V
+12V
+12V
+12V
170 X 140 mm170 X 140 mm
W0176_TR2_1000W_ _A07102201

>> >>>> >>
TR2 1000W PSU TR2 1000W PSU
ATX12V 2.2 & EPS 12V 2.91 Version
Thermaltake TR2 Power SupplyThermaltake TR2 Power Supply
ATX12V 2.2 & EPS 12V 2.91 Version
0807
Floppy Disk Connector (4pin)
Peripheral Connector (4 pin)
CPU Connector (4 pin)
1
4
Color Signal Pin
Black COM 1
Black COM 2
Yellow +12V 3
Yellow +12V 4
Color Signal Pin
Yellow +12V 1
Black COM 2
Red +5VDC 4
Black COM 3
Color Signal Pin
Yellow +12V 4
Black COM 2
Red +5VDC 1
Black COM 3
Yellow +12V 1
Black COM 2
Red +5VDC 3
Black COM 4
Orange +3.3VDC 5
Color Signal Pin
Serial ATA Power Connector
8 pin PCI-Eto 6 pin PCI-E Converter
Enable 8pin PCI-E connectorconnect to the graphiccard
that only has 6pinPCI-E socket.
20+4pin Main Power
4+4pin CPU Power
4 pin CPU Power
Peripheral & Floppy
S-ATA
6 pin standard PCI-E
6 pin standard PCI-E
8 pin standard PCI-E
8 pin standard PCI-E
Connector +12V1 +12V2 +12V3 +12V4
W0176 - 1000W PSUW0176 - 1000W PSU
+12V Rail Distribution
170 X 140 mm170 X 140 mm
W0176_TR2_1000W_ _A07102201

>> >>>> >>
TR2 1000W PSU TR2 1000W PSU
ATX12V 2.2 & EPS 12V 2.91 Version
Thermaltake TR2 Power SupplyThermaltake TR2 Power Supply
ATX12V 2.2 & EPS 12V 2.91 Version
1009
Model
W0176
SPECIFICATION
Power
Dimension
Switches
PFC
Cooling System
Efficiency
INPUT
Input Voltage
Input Frequency Range
MTBF
Input Current
Hold-up Time
1000W
140mm(L)x150mm(W)x86mm(H)
ATX Logic on-off additional power rockerswitch
Active PFC (PF >0.9)
120mm ball-bearing Fan
3100 RPM 10%
Typical load of80% at 115V/ 230V input
Typical Load 20ms
115 VAC- 230 VAC
47 ~ 63 Hz
100,000 hrs minimum at25 C
14.5A - 7.5A
OUTPUT
Max/Min Regulation Ripple & Noise Output
+12V1
+12V3
+12V2
+5V
+3.3V
-12V
+5Vsb
Total Power 1000W
30A/0.8A +5,-5% 75mV 175W
975W
25W
75mV
140mV
140mV
140mV
200mV
75mV
+5,-5%
+5,-5%
+5,-5%
+5,-5%
+10,-10%
+5,-5%
30A/0.5A
20A/0.5A
20A/0.5A
20A/0.5A
1.0A/0.0A
3.0A/0.1A
ENVIRONMENT
Operating Temp.
Storage Temp.
Operating Humidity
Storage Humidity
10 to 50
-20 to 80
5% to 95%, non-condensing
5% to 95%, non-condensing
PROTECTION
DC rail Trigger Point/Range
Over Voltage Protection
Over Current Protection
Short Protection All output to GND
+3.3V trip point
+5.0V trip point
+12.0V trip point
+3.3V
+5.0V
+12V 30A Max.
48A Max.
60A Max.
13.5V~16.5V
3.76V~4.8V
5.6V~7.0V
Peak Power 1100W(3S)
+12V4 140mV
+5,-5%
20A/0.5A
Voltage
Items
4.2 TR2 1000W SpecificationPSU
24-pin
Main Connector
8-pin
+12V Power
Connector
4-pin
Peripheral Power
Connector
4-pin
Floppy Drive
Connector
6-pin
PCI Express
Connector
Total Output Connector
X1 X1 X1 X6 X1
5-pin
SATA Connector
Technology Features
X10
- Four +12V Rails
- EPS Structure
X2 X2 X2
- Hi-Tech Black housing
- Intelligent temperature control 120mm Fan
Ten S-ATA
Connectors
4-pin
+12V Power
Connector
8-pin
PCI Express
Connector
8-pinto 6-pin
PCI Express
Connector
AC INPUT
DC OUTPUT
Maximum Load
Minimum Load
Max Combined
Wattage
The continuous total outputpower is 1000W,peak 1100W(3 sec.)
Total combined+12V output load shallbe 75A.
110V-240V 13-6.5A 50-60Hz
175W
975W 25W
+3.3V +5V +12V1 +12V2 +12V3 +12V4 -12V +5VSB
30A 30A 20A 20A 20A 20A 1A 3A
0.8A 0.5A 0.5A 0.5A 0.5A 0.5A 0.0A 0.1A
Performance
170 X 140 mm170 X 140 mm
W0176_TR2_1000W_ _A07102201

>> >>>> >>
TR2 1000W PSU TR2 1000W PSU
ATX12V 2.2 & EPS 12V 2.91 Version
Thermaltake TR2 Power SupplyThermaltake TR2 Power Supply
ATX12V 2.2 & EPS 12V 2.91 Version
4.4 Protection:
If the power supply protection that latch off all main outputs. ( when
OCP,OVP or short protection is working).Reset by cycling remote
on/off control orAC power.
4.4.1 Over CurrentProtection
4.4.2 Over Voltage Protection
+3.3V output
+5.0V output
+12.0V output
4.4.3 Short Protection
All output to GND.
3.76V ~ 4.8V
5.6V ~ 7.0V
13.5V ~ 16.5V
4.5 Environment:
4.5.1 Operating Temp. +10 C to +50 C
4.5.2 Storage Temp. -20 C to +80 C
4.5.3 Operating Humidity 5% to 95%, non-condensing
4.5.4 Storage Humidity 5% to 95%, non-condensing
4.6 EMI & Safety
12
11
+3.3V
+5.0V
+12V
Trigger Point
60A Max.
48A Max.
30A Max.
Output Voltage
4.6.1 EMI Regulatory
- FCC Part15 Subpart J,class 'B'
- CISPR 22 Class 'B'
4.6.2 Safety
- NEMKO EN60950
- VDE EN60950
- CSA C22.2NO.60950
- IEC 60950
- UL 60950
- CE
4.3.1 Inrush Current:
Maximum inrush currentfrom power-on (with power on at any
point on theAC sine) and including, but not limited to,three
line cycles, shallbe limited to a level below the surge ratingof
the input linecord, AC switch if present, bridge rectifier,fuse,
and EMI filtercomponents. Repetitive ON/OFF cycling of the
AC inputvoltage should not damage the power supply or
Cause the inputfuse to blow.
4.3.2 Power Efficiency:
4.3.3 Note:
The combined power of +5V and +3.3V is 175W max.
Add 0.1uF and 10uF capacitors across output terminal during
ripple & noise test.
4.3.4 Hold-Up Time:
20mSec. minimum attypical load
4.3.5 Power GoodDelay:
100-500 msec.
4.3.6 Power FailDelay:
>1 msec.
4.3.7 Rise Time:
20ms max atfull load.
4.3.8 MTBF at25 C(demonstrated)
100KHrs minimum
4.3 Other Specification
Loading Full load Typical load Light load
115V Required Minimum Efficiency 76% 80% 80%
230V Required Minimum Efficiency 80% 80% 80%
170 X 140 mm170 X 140 mm
W0176_TR2_1000W_ _A07102201

>> >>>> >>
TR2 1000W PSU TR2 1000W PSU
ATX12V 2.2 & EPS 12V 2.91 Version
Thermaltake TR2 Power SupplyThermaltake TR2 Power Supply
ATX12V 2.2 & EPS 12V 2.91 Version
Should you have any questions regarding the
aforementioned steps, please contact Thermaltake
directly. Failure to follow the proper procedures may
cause severe bodily harm or PC component damage.
For Support or General Inquiries, please contact us at:
Thermaltake Technology USA
Toll Free: [phone]
Email: [email protected]
Thermaltake Europe B.V.
Tel:[phone]
Email: @thermaltake.com.tw
Thermaltake Beijing Co.Ltd.
Tel:[phone]/3189 ext.16
Email: [email protected]
Thermaltake Australia and New Zealand Pty Ltd
Tel:[phone]
Email: [email protected]
Thermaltake Japan Inc.
Email: [email protected]
tt.europe
1
2
3
4
5
Condition 1: No DC output. The fan or fans are motionless
Check:
1-1 Is the AC inlet plug firmly plugged intothe PSU inlet
socket?
1-2 Is the wall socket, extension power cord, power strip
or surgeprotector in use, fully functional and wall power
switch turned 'ON'?
1-3 Is the Main Board socket (24pin) plug fully and firmly
inserted?
Condition 2: The fan or fans began rotating and then stopped.
The system hangs without proceeding any further.
Check:
2-1 Are the peripheral connectors firmly plugged into
accessory devices, such as the main hard drive,CD ROM
, etc?
2-2 If a plug has been inadvertently connected in an off-set or
reversed position,unplug the AC power source, reconnect
the offendingconnectors and then wait for 30 seconds
before replugin the AC power source and try again.
Note:
If the power supply is still unable topower up after following
the above instruction, please send the unit back to your dealer
or retailer for after sales service.
5. Trouble Shooting
1413
170 X 140 mm170 X 140 mm
W0176_TR2_1000W_ _A07102201

>> >>>> >>
TR2 1000W PSU TR2 1000W PSU
ATX12V 2.2 & EPS 12V 2.91 Version
Thermaltake TR2 Power SupplyThermaltake TR2 Power Supply
ATX12V 2.2 & EPS 12V 2.91 Version
PSU Adaptor Cable
(A)4pin-8pin (B)20pin-24pin
Specification
6.Cable Retail Package(Optional)
58g
Plastic
Black
20
pin -24 pin
198mm
Adaptor Cable
PlasticMaterial
( A )Model
16g
Weight
Red
Cable
sleeving
color
Adaptor CableModel
4pin -8 pin
Connector
type
193mm
Dimension
(mm)
( B )
Voltage 12V 3.3V,5V,
+12v,-12V
P/N:A2169
15
170 X 140 mm170 X 140 mm
W0176_TR2_1000W_ _A07102201