Thermaltake W0103 Toughpower 600 AP Owner's manual

80 PLUS Verification and Testing Repor
t
TYPICAL EFFICIENCY (50% Load):
AVERAGE EFFICIENCY :
80 PLUS COMPLIANT: YES
Value Units
100-240 Volts
8 Amps
47-63 Hz
600 Watts
Note: All measurements were taken with input voltage at 115 V nominal and 60 Hz. Input AC Current Waveform (ITHD = 13.47%, 50% Load)
IRMS PF
A-12V 3.3V 5V* 5VSB
1.30 0.98 20.5% 20% Light 146 12.2/0.1 3.4/2.5 5.2/2.4 5.2/0.3 122 83.96%
3.09 0.99 13.5% 50% Typical 351 12.3/0.2 3.3/6.3 5.1/5.9 5.1/0.8 305 86.83%
0.62 0.99 9.5% 100% Full 712 12.5/0.4 3.2/12.6 5.1/11.8 5/1.7 602 84.56%
Tested by Electric Power Research Institute, Knoxville, TN.
8/20/2008
Efficiency
%
Rated Output Power
Load
(%)
Rated Specifications
Input Voltage
Input Current
ITHD (%) Input
Watts
Fraction
of Load DC Terminal Voltage (V)/ DC Load Current (A) Output
Watts
12V (cumulative of 12V1, 12V2, etc.)
12.2/8.1
12.2/20.3
12.1/40.5
Test Date
Input Frequency
871
Type
Ecos ID #
Model Number
Serial Number
Year ATX12V
W0103RE804001205
2008
Manufacturer
86.83%
85.11%
THERMALTAKE
W0103 Toughpower 600 AP
Input and Output Power
Input Watts
Output Watts
0
100
200
300
400
500
600
700
800
20% 50% 100%
Loading (% of Rated Output Power)
Power (Watts)
Efficiency of the Power Supply
30%
40%
50%
60%
70%
80%
90%
0% 25% 50% 75% 100% 125%
Loading (% of Rated Output Power)
Efficiency (%)
Efficiency %
These tests were conducted as a part of the 80 PLUS program. 80 PLUS is
a computer buy-down program to promote high-efficiency power supplies
(greater than 80% efficiency in the active mode) in desktop computers and
desktop-derived servers.
Input Current and Voltage Waveforms
-200
-150
-100
-50
0
50
100
150
200
0 0.003 0.006 0.009 0.012 0.015
Time (s)
Voltage (V)
-15
-10
-5
0
5
10
15
Current (A)
Voltage Current