Thetford 92909 Series Setup guide

Description: SPP Level indicator Qube and Excellence
Part number: 92909-.. / 92908-../ 92410-..
Look for Service Centres, Point of Sale addresses and other
information on: www.thetford-europe.com
Version: 1
Date: March 2012
Tools required: Flat screwdriver
Repair instruction
APlace carefully a flat
screwdriver underneath the
cover, lift it up and push
with you’re thumb the cover
forwards.
0312
BDial with maget can be taken
out.
Place new level indicator in reverse steps.

Description: SPP Piston Pump Excellence/Qube
Part number: 92401-66/111/130, 92901-66/111/130
Look for Service Centres, Point of Sale addresses and other
information on: www.thetford-europe.com
Version: 1
Date: March 2012
Tools required: Flat screwdriver
Repair instruction
ARemove seat & cover
BPlace carefully flat
screwdriver under pump
housing and lift it up.
0312
CPull flush tube off and place
new pump in reverse steps.

Description: SPP Lip seal
Part number: 07101
Look for Service Centres, Point of Sale addresses and other
information on: www.thetford-europe.com
Version: 1
Date: January 2012
Tools required: Nose plier
Repair instruction
APush the handle in to
open the waste holding
tank.
BPull the lip seal out of the
inside groove with help of
the nose plier.
DWhen lip seal is on its
place, close the handle.
0112
CPush the new lip seal into
the inside groove.

Description: SPP Pour out Spout Qube and Excellence
Part number: 92907-.. / 92408-..
Look for Service Centres, Point of Sale addresses and other
information on: www.thetford-europe.com
Version: 1
Date: January 2012
Tools required:
Repair instruction
ATurn the pour out spout
and pull it out.
BPress new pour out spout
in and turn it back in
position.
0112

Description: SPP Vent button
Part number: 92407-111
Look for Service Centres, Point of Sale addresses and other
information on: www.thetford-europe.com
Version: 1
Date: January 2012
Tools required:
Repair instruction
APush the handle in to
open the waste holding
tank.
BPress the vent button in
and pull on the inside of the
waste holding tank the vent
button seal loose.
CPlace new vent button seal
and press new vent button
onto the seal
0112

Description: SPP Vent seal
Part number: 07102
Look for Service Centres, Point of Sale addresses and other
information on: www.thetford-europe.com
Version: 1
Date: January 2012
Tools required: Nose plier
Repair instruction
APush the handle in, to
open the waste holding
tank.
BPush the vent seal loose of
the inside groove and pull it
out with help of the nose
plier.
D
Hold vent seal in position
with the nose plier while
closing the handle slowly.
This will press the vent seal
back in its groove.
0112
CBy squeezing the new vent
seal, it can be pushed
through the hole.

1 2 3
4 5 6
180°
Right: Left:
Follow instructions
51057/0411
Cassette Toilet C400