thomann Ignition WAL-L310 Par User manual

WAL-L310 Par,
WAL-L710 Par,
WAL-L710 Par W-DMX
LED PAR
User manual

Musikhaus Thomann
Thomann GmbH
Hans-Thomann-Straße 1
96138 Burgebrach
Germany
Telephone: [phone]
E-mail: [email protected]
Internet: www.thomann.de
10.08.2020, ID: 474388_474390_477173

Table of contents
1 General information................................................................................................................................. 5
1.1 Further information........................................................................................................................... 6
1.2 Notational conventions.................................................................................................................... 7
1.3 Symbols and signal words............................................................................................................... 8
2 Safety instructions.................................................................................................................................. 11
3 Features....................................................................................................................................................... 17
4 Installation.................................................................................................................................................. 19
5 Starting up.................................................................................................................................................. 23
6 Connections and controls................................................................................................................... 26
7 Operating.................................................................................................................................................... 32
7.1 Starting the device........................................................................................................................... 32
7.2 Operating on the unit..................................................................................................................... 32
7.3 Menu overview................................................................................................................................. 53
7.4 Functions in 4-channel DMX mode........................................................................................... 54
7.5 Functions in 6-channel DMX mode........................................................................................... 54
Table of contents
WAL-L310 Par, WAL-L710 Par, WAL-L710 Par W-DMX 3
LED PAR

7.6 Functions in 9-channel DMX mode........................................................................................... 55
8 Technical specications....................................................................................................................... 61
9 Plug and connection assignment.................................................................................................... 67
10 Troubleshooting...................................................................................................................................... 68
11 Cleaning....................................................................................................................................................... 70
12 Protecting the environment.............................................................................................................. 71
Table of contents
4WAL-L310 Par, WAL-L710 Par, WAL-L710 Par W-DMX
LED PAR

1 General information
This user manual contains important information on the safe operation of the device. Read and
follow all safety notes and all instructions. Save this manual for future reference. Make sure
that it is available to all persons using this device. If you sell the device to another user, be sure
that they also receive this manual.
Our products and user manuals are subject to a process of continuous development. We there‐
fore reserve the right to make changes without notice. Please refer to the latest version of the
user manual which is ready for download under www.thomann.de.
General information
WAL-L310 Par, WAL-L710 Par, WAL-L710 Par W-DMX 5
LED PAR

1.1 Further information
On our website (www.thomann.de) you will nd lots of further information and details on the
following points:
Download This manual is also available as PDF le for you to download.
Keyword search Use the search function in the electronic version to nd the topics of
interest for you quickly.
Online guides Our online guides provide detailed information on technical basics
and terms.
Personal consultation For personal consultation please contact our technical hotline.
Service If you have any problems with the device the customer service will
gladly assist you.
General information
6WAL-L310 Par, WAL-L710 Par, WAL-L710 Par W-DMX
LED PAR

1.2 Notational conventions
This manual uses the following notational conventions:
The letterings for connectors and controls are marked by square brackets and italics.
Examples: [VOLUME] control, [Mono] button.
Texts and values displayed on the device are marked by quotation marks and italics.
Examples: ‘24ch’ , ‘OFF’ .
Letterings
Displays
General information
WAL-L310 Par, WAL-L710 Par, WAL-L710 Par W-DMX 7
LED PAR

The individual steps of an instruction are numbered consecutively. The result of a step is
indented and highlighted by an arrow.
Example:
1. Switch on the device.
2. Press [Auto].
ðAutomatic operation is started.
3. Switch o the device.
1.3 Symbols and signal words
In this section you will nd an overview of the meaning of symbols and signal words that are
used in this manual.
Instructions
General information
8WAL-L310 Par, WAL-L710 Par, WAL-L710 Par W-DMX
LED PAR

Signal word Meaning
DANGER! This combination of symbol and signal word indicates an
immediate dangerous situation that will result in death or
serious injury if it is not avoided.
WARNING! This combination of symbol and signal word indicates a pos‐
sible dangerous situation that can result in death or serious
injury if it is not avoided.
NOTICE! This combination of symbol and signal word indicates a pos‐
sible dangerous situation that can result in material and
environmental damage if it is not avoided.
Warning signs Type of danger
Warning – high-voltage.
Warning – hot surface.
General information
WAL-L310 Par, WAL-L710 Par, WAL-L710 Par W-DMX 9
LED PAR

Warning signs Type of danger
Warning – dangerous optical radiation.
Warning – suspended load.
Warning – danger zone.
General information
10 WAL-L310 Par, WAL-L710 Par, WAL-L710 Par W-DMX
LED PAR

2 Safety instructions
This device is intended for use as an electronic lighting eect by means of LED technology. The
device is designed for professional use and is not suitable for use in households. Use the
device only as described in this user manual. Any other use or use under other operating con‐
ditions is considered to be improper and may result in personal injury or property damage. No
liability will be assumed for damages resulting from improper use.
This device may be used only by persons with sucient physical, sensorial, and intellectual
abilities and having corresponding knowledge and experience. Other persons may use this
device only if they are supervised or instructed by a person who is responsible for their safety.
Extend the life of the device by regular breaks in operation and avoid switching it on and o
frequently. This device is not suitable for continuous use.
Intended use
Safety instructions
WAL-L310 Par, WAL-L710 Par, WAL-L710 Par W-DMX 11
LED PAR

DANGER!
Danger for children
Ensure that plastic bags, packaging, etc. are disposed of properly and are not
within reach of babies and young children. Choking hazard!
Ensure that children do not detach any small parts (e.g. knobs or the like) from
the unit. They could swallow the pieces and choke!
Never let children unattended use electrical devices.
DANGER!
Electric shock caused by short-circuit
Always use proper ready-made insulated mains cabling (power cord). Do not
modify the mains cable. Failure to do so could result in electric shock/death or
re. If in doubt, seek advice from a registered electrician.
Safety
Safety instructions
12 WAL-L310 Par, WAL-L710 Par, WAL-L710 Par W-DMX
LED PAR

DANGER!
Electric shock caused by short-circuit
Do not modify the mains cable or the plug. Failure to do so could result in electric
shock/death or re. If in doubt, seek advice from a registered electrician.
DANGER!
Electric shock caused by high voltages inside
Within the device there are areas where high voltages may be present. Never
remove any covers.
There are no user-serviceable parts inside.
Do not use the device if covers, protectors or optical components are missing or
damaged.
Safety instructions
WAL-L310 Par, WAL-L710 Par, WAL-L710 Par W-DMX 13
LED PAR

WARNING!
Eye damage caused by high light intensity
Never look directly into the light source.
WARNING!
Risk of epileptic shock
Strobe lighting can trigger seizures in photosensitive epilepsy. Sensitive persons
should avoid looking at strobe lights.
WARNING!
Risk of burns
The surface of the device can become very hot during operation.
Do not touch the device with bare hands during operation, and after switching
o wait for at least 15 minutes.
Safety instructions
14 WAL-L310 Par, WAL-L710 Par, WAL-L710 Par W-DMX
LED PAR

NOTICE!
Risk of re
Do not block areas of ventilation. Do not install the device near any direct heat
source. Keep the device away from naked ames.
NOTICE!
Power supply
Before connecting the device, ensure that the input voltage (AC outlet) matches
the voltage rating of the device and that the AC outlet is protected by a residual
current circuit breaker. Failure to do so could result in damage to the device and
possibly injure the user.
Unplug the device before electrical storms occur and when it is unused for long
periods of time to reduce the risk of electric shock or re.
Safety instructions
WAL-L310 Par, WAL-L710 Par, WAL-L710 Par W-DMX 15
LED PAR

NOTICE!
Fire hazard due to exceedance of the maximum current
The device can power other devices. The current consumption of all serially con‐
nected other devices must not exceed the values indicated in the technical speci‐
cations, otherwise you risk injuries and irreparable damages of the device.
Connect just so many devices to the output socket that the maximum current
consumption is not exceeded.
Ensure the correct dimensioning (wire cross section) of the used power cords of
all serially connected devices.
Safety instructions
16 WAL-L310 Par, WAL-L710 Par, WAL-L710 Par W-DMX
LED PAR

3 Features
Splash-proof LED par, ideal for ambient lighting outdoors, for lighting buildings and stages.
Special features of the device:
nItem no. 474388: 3 × 4-in-1 LEDs (RGBW, 10 W each)
nItem no. 474390 and 477173: 7 × 4-in-1 LEDs (RGBW, 10 W each)
nControl via DMX, via RDM and via buttons and display on the unit
nBuilt-in automatic show programmes
nMaster / Slave operation
nProtection class IP65
nSturdy double bracket for secure attachment to trusses or rm footing on the ground
nOmega bracket with quick lock
Ignition WAL-L710 Par W-DMX (item no. 477173) plus:
nBuilt-in Wireless Solution (G5) receiver module for wireless control
nBarn door, diusion lter 25° and diusion lter 40° optionally available
Features
WAL-L310 Par, WAL-L710 Par, WAL-L710 Par W-DMX 17
LED PAR

The device supports RDM protocol communication (Remote Device Management) according
to ANSI / ESTA E1.20. It can exchange information with an RDM-compatible controller. Also
observe the instruction manual of the controller.
Equipment with protection class IP65 are dust-tight and completely protected against contact
(rst code number). They are also protected against splash water from any angle (second code
digit). That is why this equipment can also be used outdoors. Event technology equipment is
generally only designed for temporary use however (event lighting) and not for permanent
use outdoors.
The specied protection class does not make a statement about the weather resistance of the
equipment (resistance to changing ambient conditions as well as against the eects of sun‐
light and UV rays).
The seals and screw connections of the equipment must be checked regularly to ensure a
fault-free operation. In cases of doubt, consult a specialist workshop in due time.
For technological reasons, the light output of LEDs decreases over their lifetime. This eect
increases with higher operating temperature. You can extend the service life of the illuminants
by providing adequate ventilation and operating the LEDs with the lowest possible brightness.
Remote Device Management
(RDM)
Information about protection
class IP65
Features
18 WAL-L310 Par, WAL-L710 Par, WAL-L710 Par W-DMX
LED PAR

4 Installation
Unpack and check carefully there is no transportation damage before using the unit. Keep the
equipment packaging. To fully protect the product against vibration, dust and moisture during
transportation or storage use the original packaging or your own packaging material suitable
for transport or storage, respectively.
WARNING!
Risk of injury caused by falling objects
Make sure that the installation complies with the standards and rules that apply
in your country. Always secure the device with a secondary safety attachment,
such as a safety cable or a safety chain.
Installation
WAL-L310 Par, WAL-L710 Par, WAL-L710 Par W-DMX 19
LED PAR

NOTICE!
Risk of overheating
Always ensure sucient ventilation.
The ambient temperature must not exceed the limits stated in the chapter Tech‐
nical Specications of the User Manual.
NOTICE!
Use of stands
When mounting the device onto a stand, ensure that the stand is in a safe and
stable position and that the weight of the device does not exceed the maximum
permissible load capacity of the stand.
Installation
20 WAL-L310 Par, WAL-L710 Par, WAL-L710 Par W-DMX
LED PAR