THOMSON THT501 User manual

Look, Listen & Live
www.thomsonstb.net
User manual
Manuel d’Utilisateur
Manuale Utente
Manual del usuario
Manual do Usuário
Felhasználói
kézikönyv
Instrukcja obsługi
Руководство
пользователя
THT501
Digital High
Definition
Terrestrial
Receiver

P1
English
TABLE OF CONTENTS
1.0 INTRODUCTION 2
1.1 Safety Instructions 2
1.2 Storage 2
1.3 Equipment Set-up 3
1.4 Accessories 3
1.5 Usage of external USB devices 3
2.0 YOUR RECEIVER 3
2.1 PIN-CODE DEFAULT: 0000 3
2.2 Front Panel 3
2.3 Rear Panel 4
2.4 Remote Control 4
3.0 CONNECTION 5
3.1 Connecting to a Terrestrial Antenna 5
3.2 Connecting to TV with HDMI cable 6
3.3 Connecting to TV with SCART cable 6
3.4 Connecting to TV with Cinch cable 6
3.5 Connecting to a Digital Audio Amplifier with S/PDIF 6
3.6 Connecting to a Digital Audio Amplifier and TV using HDMI 6
3.7 Connecting a USB storage device 6
3.8 Connecting and using an infrared sensor 6
4.0 STARTING UP FOR THE FIRST TIME 7
5.0 QUICK GUIDE TO USING YOUR RECEIVER 8
6.0 OPERATION 8
6.1 Changing channels 8
6.2 Info Banner 9
6.3 Selection of audio language 9
6.4 Teletext 9
6.5 Subtitles 9
6.6 Time Shift 9
6.7 EPG (Electronic Programme Guide) 10
6.8 Instant Recording 10
7.0 MAIN MENU 10
7.1 Edit Channel 10
7.2 Installation 13
7.3 System Setup 14
7.4 Tools 17
7.5 Games 18
7.6 Media+ 18
8.0 TROUBLESHOOTING 20
9.0 TECHNICAL SPECIFICATIONS 21
17 Jan 2012 16:09
THOMSON declares that this item complies with the basic requirements and other relevant regulations of directives CE 2004/108/EC
and 73/23EC; RoHS 2002/95EC
Subject to alterations. In consequence of continuous research and development technical specifications, design and appearance of products
may change. All product names are trademarks or registered trademarks of their respective owners.
© THOMSON 2012. All rights reserved.

P2
INTRODUCTION
1.0 INTRODUCTION
1.1 Safety Instructions
DO NOT INSTALL YOUR RECEIVER:
In a closed or poorly ventilated cabinet; directly on top of or under any other
equipment; on a surface which might obstruct the ventilation slots.
DO NOT EXPOSE THE RECEIVER OR ITS ACCESSORIES:
 To direct sunlight or any other equipment that generates heat; to rain or intense
moisture; to intense vibration and to any shock which may cause permanent
damage to your receiver or to any magnetic objects, such as loudspeakers,
transformers, etc.
 Do not use a damaged power cord. It may cause a fire or an electrical shock. Do
not touch a power cord with wet hands. It may cause an electric shock.
 When the receiver is not used for a long period of time, you should unplug the
power cord from the wall socket.
 Do not use alcohol or ammonia based liquids to clean the receiver. If you wish, you
may clean your receiver with a soft lint-free cloth slightly made damp with a mild
soap solution, only after disconnecting from the mains voltage supply. Make sure
no foreign objects fall through the ventilation slots because this could cause fire or
an electric shock.
 Do not place any objects on top of the receiver because this might prevent proper
cooling of the components inside.
Safety Precautions
 Never open the receiver cover. Doing so will void the warranty. It is dangerous to
touch the inside of the receiver due to high voltage currents and possible electrical
hazards. Refer all maintenance or servicing to qualified service personnel.
 When you are connecting cables, be sure that the receiver is disconnected from
the mains supply. Wait a few seconds after switching off the receiver before you
move the receiver or disconnect any equipment.
 Use only approved extension cords with compatible wiring that is suitable for the
electrical power consumption of the installed equipment. Please ensure that the
electrical power supply corresponds with the voltage on the electrical identification
plate at the back of the receiver.
 If the receiver does not operate normally even after strictly following the instructions
in this user manual, it is recommended to consult your dealer.
1.2 Storage
Your receiver and its accessories are stored and delivered in a packaging designed
to protect against electric shocks and moisture. When unpacking it, make sure
that all the parts are included and keep the packaging away from children. For
transporting the receiver from one place to another or if you are returning it under
warranty conditions, make sure to repack the receiver in its original packaging with
its accessories. Failing to comply with such packaging procedures could void
your warranty.

YOUR RECEIVER
P3
English
1.3 Equipment Set-up
We recommend you consult a professional installer to set up your equipment.
Otherwise, please follow the instructions below:
Refer to the user manual of your TV and antenna.
Make sure that the HDMI cable and outdoor components are in a good condition.
Use only a HDMI 1.3 cable or higher for maximum performance.
If you use TV SCART connection, use then well shielded SCART cable.
This manual provides complete instructions for installing and using this receiver. The
following symbols will serve as follow.
WARNING Indicates warning information.
TIPS Indicates any other additional important or
helpful information.
MENU Represents a button on the remote control or the
receiver. (Bold Character)
Move to Represents a menu item within a window.
(Italic Character)
1.4 Accessories
1. User Manual
2. 1 Remote control unit
3. 2x Batteries (AAA type)
4. Infrared sensor
NOTE: The batteries should not be recharged, disassembled, electrically
short-circuited, be mixed or used with other types of batteries.
1.5 Usage of external USB devices
It is recommended to use USB 2.0 storage devices or higher. If your device is not
compatible to USB 2.0 specifications, recording, playback and other multimedia
functions of the receiver might not work properly.
To ensure best performance of your USB storage device please format it by this
receiver (menu “Media+”) to FAT32 system. Other file systems are not supported
by the receiver. However, it is possible to use already NTFS formatted disks.
THOMSON cannot guarantee compatibility with all types of USB storage devices.
It is advised not to store important information on USB storage devices used with
the receiver. Always make backups of data on your USB storage device before
using it with this receiver. THOMSON will not take responsibility for any loss of
information or circumstances caused by loss of information.
2.0 YOUR RECEIVER
2.1 PIN-CODE DEFAULT: 0000
2.2 Front Panel
Fig. 1

P4
YOUR RECEIVER
1. 4 digits display: Indicates current time in STANDBY mode
Indicates current channel number or action in
OPERATING mode
2. IR sensor: Point your remote control towards this sensor.
3. Mode indicator: Red indicates that the receiver is in
STANDBY mode.
In OPERATING mode it is off.
2.3 Rear Panel
Fig. 2
1. ANT IN To connect to your antenna for the reception of
broadcast signal.
2. USB Connector for USB devices.
3. TO TV To connect to the terrestrial antenna input of your
TV set.
4. IR Sensor To connect to extended IR sensor.
5. HDMI To connect your receiver with your TV set using a
HDMI cable.
6. Video Connector To connect your receiver with your TV set using a
cinch cable.
7. Audio R/L Connector To connect your receiver with your TV set using a
cinch cable.
8. TV SCART To connect your receiver with your TV set using a
SCART cable.
9. S/PDIF Coaxial To connect your receiver to a digital audio amplifier.
10. Power Cord Your receiver requires a voltage of 220~240V
AC (Auto-selectable), 50/60Hz ±5%. Check the
local power specification before connecting your
receiver to the wall outlet.
2.4 Remote Control
Fig. 3
1. q Turns the receiver On/Standby
2. FAV Favourite group selection
3. TV/R Toggles between TV or RADIO mode
4. 0~9 Channel selection or value input
5. PG+/PG- Page up/down and 10 channels steps in channel
list mode
6. BACK Switches between the two last watched channels
7. Shows the current channel information
8. pq Menu Off: Change channel to previous/next.
Menu On: Moves the cursor up/down.
9. tu Menu Off: Increases/decreases the volume level.
Menu On: Moves the cursor left/right and change
settings for specific Menus

CONNECTION
P5
English
10. OK Menu Off: Displays the current channel list
Menu On: Activates the highlighted menu item.
11. MENU Opens the main menu, in menu you will get one
step back
12. EXIT/SORTIE Exits from the menu or submenu
13. GUIDE Shows the EPG (Electronic Programme Guide) in
TV mode
14. V+/V- Volume up/down
15. Mutes audio output of the receiver
16. P+/P- Programme ± (up/down in menu)
17. SUB Shows list of subtitled languages
18. TXT Shows Teletext on OSD (On Screen Display)
19. AUDIO Show the current audio channel or select left, right
or stereo
20. LIST Opens the Media Player list in viewing mode
21. OPT GOTO function in during playback
22. Changes Aspect ratio of Video between
available modes
23. : No function
24. 5 6 Fast rewind/Fast forward
25. " Performs slow motion in Record playback
26. 4 Records the TV programme to the connected
storage device
27. u Starts playback of the selected file in Media Player
or resumes play in Timeshift mode
28. 2 Pause or start Timeshift mode
29. 3 Stops playback of the selected file in Media Player
and Record playback
Stops Timeshift
30. RED Multimedia and Teletext functions
Opens the recordings list in viewing mode (If
storage device connected)
31. GREEN For Multimedia and Teletext functions
32. YELLOW For Multimedia and Teletext functions
33. BLUE For Multimedia and Teletext functions
3.0 CONNECTION
3.1 Connecting to a Terrestrial Antenna
Fig. 4
To receive broadcast signal, your terrestrial indoor or outdoor antenna must be
connected to the ANT IN connector on the back of the receiver. Use a properly
shielded antenna cable and suitable connectors.
The TO TV connector allows you to loop the antenna signal to a second receiver or
TV set.

P6
CONNECTION
3.2 Connecting to TV with HDMI cable
Fig. 4
The TV set shall be connected with the receiver using a good quality HDMI 1.3 or
higher cable. This connection gives the highest possible quality.
3.3 Connecting to TV with SCART cable
Fig. 4
THT501 is also equipped with a SCART connector; alternatively, the TV set can be
connected to the receiver using a good quality SCART cable.
3.4 Connecting to TV with Cinch cable
Fig. 4
TV sets without SCART or HDMI input(s) can be connected to the receiver using
suitable cinch cables. Connect one end of the cable to the Audio L, R and VIDEO
connectors on the back of THT501. Connect the other end to the respective inputs
on your TV set.
3.5 Connecting to a Digital Audio Amplifier with S/PDIF
Fig. 5
By connecting your receiver to a digital amplifier or home theatre system, you can
enjoy the best possible sound quality and multi-channel audio (depending on
broadcast). Connect your Digital Audio Amplifier or home theatre system with a
suitable cinch cable to the S/PDIF connector on the back of the receiver.
3.6 Connecting to a Digital Audio Amplifier and TV using HDMI
Fig. 6
By connecting your receiver to the latest digital amplifiers or home theatre systems
with HDMI connections, you will enjoy the best possible sound quality and multi-
channel audio (depending on broadcast). Connect the HDMI output of the receiver
to an input of your amplifier, and then connect the HDMI output of the amplifier
to your TV set. Select the correct input on your amplifier to watch and listen
to programmes.
3.7 Connecting a USB storage device
Fig. 7
NOTE: We recommend the use of a hard disk drive USB 2.0 or higher for
recording and play back of TV events.
For proper functioning of Time Shift and recording functions, a fast USB device
(such as a hard disk drive) is needed. Interrupted playback or a distorted picture
during playback or Time Shift are indications for a low device speed. THOMSON
cannot guarantee proper functioning of recoding and or Time Shift functions with all
USB devices.
3.8 Connecting and using an infrared sensor
Fig. 7

STARTING UP FOR THE FIRST TIME
P7
English
With the infrared sensor you can place the receiver out of sight (e.g. a closed
cabinet) while still being able to control it. Plug the infrared sensor into the “IR”
connector on the back of the receiver. Locate the sensor at a position allowing a
direct sight to the remote control. Once a suitable location is found, remove the
protection foil from the adhesive tape on the bottom of the sensor and fix it by
slightly pressing it down on the surface it should be placed on.
4.0 STARTING UP FOR THE FIRST TIME
If you use your receiver for the first time, the Welcome “Easy install” menu appears.
Use pq to move the highlight to the setting you wish to alter and use tu to
change values.
Start by selecting your language using tu. Once you have selected your
language, press q to move to the highlight next item and use tu to change.
Language Select your language.
Region: Select your region where this receiver is used.
Subtitle: Select Normal to display subtitles per default,
Select Hard of Hearing to show HoH subtitles per
default. Select Off to hide subtitles per default.
Aspect Mode: Use this option to select the aspect ratio of your
TV and the preferred conversion method. Options
are: Auto (automatic detection of aspect ratio), 4:3
Panscan (Displays 16:9 widescreen broadcasts
full screen on your 4:3 TV), 4:3 letterbox (black
bars on top and under the picture on a 4:3 TV) and
16:9 (use this setting for 16:9 TV sets).
Scan mode: Select All to store scrambled and free to air
channels or select Free to store only free to air
channels. Note: Scrambled channels you cannot
watch with this receiver.
Connection: Use this option to select the connection to your
TV set. Select HDMI or SCART. If you are using a
cinch cable then this selection is not important.
Once all settings are made, move the highlight to OK and press OK to continue.
NOTE: Wrong region selection can lead to missing channels or channels
being stored on wrong positions in the channel list.
The receiver will now advance to the Aerial Adjustment screen.
This part of the wizard is of great help when setting up your antenna system.
Use pq to move the highlight to the setting you wish to alter and use tu to
change values. The following settings are available:
Antenna Power: Set to On if you use an active antenna. When set
to On, 5 V will be present on the ANT IN connector
of the receiver. Select Off for passive antennas.
Beeper: Select On for an audible indication of signal
reception. Off turns the beeper off.

P8
QUICK GUIDE TO USING YOUR RECEIVER
Channel No.: Select a channel that is known to carry a
broadcast in your region. The Signal Strength and
Signal Quality bars give a visual indication of the
reception. Adjust your antenna to obtain maximum
signal strength and quality.
Once all settings are made, press OK to start scanning.
The receiver will now search for all available channels. Once scanning is finished,
the receiver switches to viewing mode.
TIP: In case the Welcome “Easy install” menu does not appear after
switching on the receiver the first time, reset the receiver to factory
settings by pressing the MENU button and selecting Tools, then
submenu Load Factory Setting (Default PIN 0000)
5.0 QUICK GUIDE TO USING YOUR RECEIVER
We at THOMSON understand that you can’t wait to enjoy your new high definition
digital terrestrial receiver. The following quick guide will make you familiar with the
basic operation of this device. We do, however, advice you to read the full manual
to get the best performance from your receiver.
To turn your receiver ON or to Standby, use the q button on the remote control.
Choose the desired channel with the pq buttons. Alternatively, you can digit
the channel number with the 0~9 buttons on the remote control. Or press OK in
viewing mode to display the channel list. The volume can be adjusted with the
tu buttons.
6.0 OPERATION
Your new receiver is equipped with several features to make watching TV a true
pleasure. This paragraph describes these features. Please also read chapter 7.0 to
get familiar with the menu of your receiver.
6.1 Changing channels
Your new receiver is equipped with four ways to change channels.
Via direct access using the 0~9 buttons.
Via the channel list trough OK button.
Via the PG+ and PG- keys.
Via the pq keys.
6.1.1 Direct access via 0~9 buttons
To gain direct access to a certain channel, simply input its number with the 0~9
keys on the remote control. Channel numbers can be up to four digits long.
Entering a number with less than four digits is possible. Just wait a few seconds
and your receiver will switch to the selected channel or press OK immediately after
seleselecting the channel number.

OPERATION
P9
English
6.1.2 Channel list
Press OK in viewing mode to display the Channel List. Use pq in the Channel
List to highlight your channel of choice and press OK once to select the highlighted
channel. Press OK again to leave the Channel List.
TIP: Use tu to toggle between the All Channel list and favourite lists or
press FAV for a list of available favourite lists.
6.1.3 Using the pq or PG+/PG- keys
p switches to the next channel.
q switches to the previous channel.
PG+ switches to the next 10 channels.
PG- switches to the previous 10 channels.
6.2 Info Banner
While watching TV you can press the button any time to get information about
the current channel and event*. Press twice for extended EPG details about the
current channel. Press three times for technical details about the current channel.
*Event information is displayed when available. Availability depends on broadcast.
6.3 Selection of audio language
Some channels support a choice of audio formats and/or languages. To select
another audio stream, press AUDIO in viewing mode. A list with available audio
streams will now be displayed. Use pq to select the desired stream and confirm
with OK. The audio channel as stereo, mono, left and right can be selected with
the tu buttons.
6.4 Teletext
Your receiver includes a fully featured Teletext. To access Teletext, press the TXT
button in viewing mode and use the 0~9 buttons to input the number of the page
you wish to see. The coloured buttons of the remote control allow you to jump to
selected pages directly, as indicated on the bottom of the teletext screen. Use the
pq buttons to select one page up or down, use tu buttons to select subpages.
Press EXIT/SORTIE or TXT to get back to viewing mode.
6.5 Subtitles
Some channels support a choice of subtitle languages. Press SUB in viewing
mode to display a list of available subtitle languages. Select your subtitle of
choice with pq and press OK to confirm. Press EXIT/SORTIE to leave without
making changes.
6.6 Time Shift
Time Shift allows you to pause live broadcasts and resume playback later. First
activate Timeshift in Media+, set the DVR Configuration to ON and connect your
external USB storage device. See chapter 7.6.5 DVR Configuration for details.
Press 2 in viewing mode to start this mode. A time banner will appear shortly on

P10
MAIN MENU
screen. Press 1 to resume Timeshifted playback. Press 5 6 for Fast rewind/Fast
forwards. Press 3 to return to live TV.
NOTE: Time Shift needs a connected USB storage device with sufficient
free space and sufficient speed in order to work properly.
6.7 EPG (Electronic Programme Guide)
The Electronic Programme Guide is a very useful function that allows you to view
event schedules and information and to mark programmes for recording. To
access the EPG, press the GUIDE button in viewing mode. Use pq to select
the desired channel and tu to select the desired event. Press OK to display
detailed information on the selected event. Use EXIT/SORTIE to quit the detailed
information screen. Press RED to get to the Step Time function. Use tu to select
the desired step and OK to execute it. Press EXIT/SORTIE to quit the Step Time
function. Press GREEN to set a timer for a selected event. Refer to section 7.3.4
for details on the timer function.
NOTE: Availability of EPG data depends on broadcast.
6.8 Instant Recording
-Your new receiver allows you to make an instant recording of the programme you
are watching. Simply press 4 to start the recording. To enter the duration for the
recording, press 4 again. Use the 0~9 keys to input the desired recording time.
During the start of recording a recording sign will be shortly shown on the upper left
of your TV screen. To stop the recording, press 3. Select Yes and press OK again
to stop the recording.
you can access the Record Manager via the RED button, see chapter 7.6.2
for details.
*Please connect an USB storage device with sufficient free space before you start a recording.
7.0 MAIN MENU
The main menu gives you access to settings, multimedia functions and built in
games. To access the main menu, press MENU in viewing mode. The main menu
consists of the following sub menus: Edit Channel, Installation, System Setup,
Tools, Game and Media+.
Throughout the main menu, MENU or EXIT/SORTIE can be used to get back to
the previous screen.
7.1 Edit Channel
Use pq to select Edit Channel and press OK or u to enter.
Use pq to highlight the desired sub menu and press OK to select.
Press EXIT/SORTIE or t to get back to the main menu.

MAIN MENU
P11
English
7.1.1 TV Channel List
In Edit Channel menu select TV Channel List with pq and press OK to enter.
Use tu to change the channel group (assumed you have already set up favourite
groups).
Select the desired channel with pq. Press OK to view the selected channel in the
preview box.
7.1.1.1 Adding channels to favourite lists
Channels from the TV Channel List can be added to up to 8 different favourite
groups. Press FAV while in TV Channel List to access this function. The FAV sign
on the top of the screen will move up to indicate that the favourite function is
selected. Use pq to select a channel you wish to add to a favourite group. When
the highlight is on the desired channel, press OK. A list with all available favourite
lists will now pop up. Use pq to select the favourite list you wish to add the
channel to and press OK, press EXIT/SORTIE to finalize the process. Favoured
channels will be marked with a heart symbol. Once all changes are made, press
EXIT/SORTIE twice. A confirmation banner will pop up. Select Yes to save the
changes or No to discard.
7.1.1.2 Locking channels
Locked channels can only be watched after entering the pin code. (DEFAULT PIN:
0000)
To lock or unlock a channel, press RED while in TV Channel List. The red Lock sign
on the top of the screen will move up to indicate that the Lock function is selected.
Use pq to select the desired channel and press OK to lock or unlock it. You are
asked to input the pin code. (DEFAULT PIN: 0000) Locked channel will be marked
with the  symbol. Locking/unlocking multiple channels in one session is possible.
Once all changes are made, press EXIT/SORTIE twice. A confirmation banner
will pop up. Select Yes to save the changes or No to discard. Locking/unlocking
multiple channels in one session is possible.
7.1.1.3 Skipping channels
Channels marked with Skip will be skipped when zapping channels with the pq
buttons. Despite that, these channels are still available from the channel list.
To mark channels for skipping, press GREEN while in TV Channel List. The Skip
symbol on the top of the screen will move up to indicate that the Skip function is
selected. Use pq to select the desired channel and press OK to mark or unmark
it for skipping. Channels set for skipping will be marked with the ENTER symbol.
Once all changes are made, press EXIT/SORTIE twice. A confirmation banner will
pop up. Select Yes to save the changes or No to discard.
7.1.1.4 Moving channels
To enable the Move function, press YELLOW while in TV Channel List. The Move
symbol on the top of the screen will move up to indicate that the Move function is
selected. Use pq to select the desired channel and press OK to select it. You
can now move the selected channel up or down the channel list using pq. Once

P12
MAIN MENU
the channel is on the desired position, press OK again. The channel is now fixed
on its new position. Once all changes are made, press EXIT/SORTIE twice. A
confirmation banner will pop up. Select Yes to save the changes or No to discard.
7.1.1.5 Editing channels
The Edit function allows you to Sort, Rename or Delete channels. To enter the Edit
menu, press BLUE while in TV Channel List. The Edit Channel menu will appear.
If you made changes in the previous menu, but not saved them yet, you will be
asked to do so now.
Sort
Press RED to enter the Sort menu.
Use pq to select the desired sorting method and press OK to confirm.
Possible methods are:
Name (A-Z): Sorting in alphabetical order from A to Z.
Name (Z-A): Sorting in alphabetical order from Z to A.
Free/Scramble: First in the list will be Free-To-Air channels.
Lock: All unlocked channels will placed first in the list.
Default: Sorting by searched Order (from lowest to highest
frequency or by LCN numbering).
Rename
Press GREEN in Edit Channel to enable the Rename function. The Rename
sign will move up to indicate that Rename is selected. Use pq to highlight the
desired channel and press OK to select it. A text field will now pop up at the right
of the screen. Use tu pq to select the desired characters and enter them with
OK. Once you have finished editing, press BLUE to enter the changes. Once all
changes are made, press EXIT/SORTIE twice. Select Yes to save the changes or
No to discard.
Delete
Press BLUE in Edit Channel to enable the Delete function. The Delete sign will
move up to indicate that Delete is selected. Use pq to highlight the desired
channel and press OK to mark it for deletion. The receiver asks you to enter the pin
code. Once you have marked all channels you wish to delete, press EXIT/SORTIE
twice. A confirmation banner will be displayed. Select Yes to delete the marked
channels or No to cancel.
7.1.2 Radio Channel List
Basically, the operation of the Radio Channel List is the same as in the TV Channel
List. The only difference is that in Radio Channel List there is no video information,
so it will always display the radio logo at the right preview screen.
7.1.3 Delete all
Use this menu to delete all stored channels. Select Delete All with pq and press
OK. The receiver asks you to enter the pin code. (Default pin:0000). In the

MAIN MENU
P13
English
confirmation window select Yes with tu and press OK to delete or select No
to cancel.
WARNING! The Delete all function will permanently delete all current channels and
all favourite lists from your receiver, and you are not able to leave the
menu until you search for channels again.
7.2 Installation
7.2.1 Auto Scan
Use pq to select Installation and press OK or u to advance.
Select Auto Scan with pq and press OK to enter.
Use tu to toggle between FTA Only Yes or No. When FTA Only is set to Yes,
scrambled channels won’t be stored in the channel list. Use pq to highlight
Search. Now press OK to start auto scan.
The receiver will store all newly found channels in the channel list.
7.2.2 Channel Scan
Use pq to select Installation, press OK or u to advance.
Use pq to select Channel Scan and press OK to enter.
Use tu to toggle between available scan modes: By Channel and
By Frequency.
If By Channel is selected, use the cursor buttons to select Scan Band and Channel
No. If By Frequency is selected, use the cursor buttons to select Frequency
and Bandwidth. Highlight Search and press OK to start scanning. Newly found
channels will be stored in the channel list.
7.2.3 Antenna Adjustment
Use pq to select Installation, press OK or u to advance.
Use pq to select Aerial Adjustment and press OK to enter.
Use pq move the highlight to the setting you wish to alter and use tu to
change values.
The following settings are available:
Antenna Power: Set to On if you use an active antenna. When set
to On, 5 V will be present on the ANT IN connector
of the receiver. Select Off for passive antennas.
Beeper: Select On for an audible indication of signal
reception. Off turns the beeper off.
Channel No.: Select a channel that is known to carry a
broadcast in your region. The Signal Strength and
Signal Quality bars give a visual indication of the
reception. Adjust your antenna to obtain maximum
signal strength and quality.
Press EXIT/SORTIE to leave the Antenna Adjustment screen.

P14
MAIN MENU
7.2.4 LCN (Logical Channel Numbering)
If LCN (Logical Channel Numbering) is activated and an LCN signal is provided
by the operator, channels will be stored in an operator defined order. Set LCN
to On to activate operator defined channel numbering or Off to store channels in
found order.
7.3 System Setup
This menu allows you to manage the system settings of your receiver. It consists of
the following sub-menus: Language, TV System, Local Time Setting, Timer
Setting, Parental Lock, OSD Setting, Favourite and
Auto Standby.
Press pq to highlight desired menu and press OK advance to the next screen.
Use pq to move the highlight to the desired setting. Values can be changed with
tu. Press EXIT/SORTIE to leave.
7.3.1 Language
This menu allows you to set up your language preferences.
Language: Use tu to select the desired language for the On
Screen Display.
First Audio: Use tu to select the desired Audio language.
Second Audio: Use tu to select a language that will be played
when the language selected at First Audio
isn’t available.
Subtitle Language : Use tu to select the preferred subtitle language.
Subtitles: Use tu to select the preferred subtitle type to be
displayed automatically.
Teletext: Use tu to select the preferred teletext language
(when available.)
7.3.2 TV System
Use this menu to match your receiver to your TV set. The following settings
are available:
Video Resolution: Toggles between 576i up to 1080p. Please use a
setting that matches your TV’s specifications. After
a selection is made, you will be asked to confirm.
Note: Selection is only applicable on HDMI.
Aspect Mode: Use this option to select the aspect ratio of your
TV and the preferred conversion method. Options
are: Auto (automatic detection of aspect ratio), 4:3
Panscan (Displays 16:9 widescreen broadcasts
full screen on your 4:3 TV), 4:3 letterbox (black
bars on top and under the picture on a 4:3 TV) and
16:9 (use this setting for 16:9 TV sets).
Connection: Use this option to select the connection to your
TV set. Select HDMI or TV SCART. If connection

MAIN MENU
P15
English
type HDMI is selected, then on TV SCART only the
CVBS signal is available.
Digital Audio Output: Toggles between PCM and Bitstream output.
When PCM is selected, all audio will be converted
to stereo audio. Bitstream enables multi-channel
audio on the digital output to be used with home
cinema sets.
7.3.3 Local Time Setting
Here you can set up your region and time zone.
Region: Use tu to select the region you live in.
GMT Usage: Set to On for broadcaster defined time or to Off to
input time and date manually.
GMT Offset: Allows you to adjust the time zone you live in. This
option is only available when GMT Usage is set to
On. The GMT Offset range is “-11:30 ~ +12:00”,
increasing by half hours progressively. The cities
matching the set GMT Offset are displayed at the
bottom of the screen.
Summer Time: Select Off or On to add one hour extra for summer
time during the summer.
Date: Date and Time settings are available only when
GMT Usage is set to Off. Use the 0~9 buttons to
enter the date. Press EXIT/SORTIE to proceed.
Time: Date and Time settings are available only when
GMT Usage is set to Off. Use the 0~9 buttons to
enter the time. Press EXIT/SORTIE to proceed.
Time display Set to On, time will be shown on screen, select Off
to remove.
7.3.4 Timer Setting
This menu allows you to set up to 8 timed events for recording or waking up
the receiver.
Use pq to select Timer Setting from the System Setup menu and press OK
to enter.
The receiver will display a list with 8 timers, followed by their respective status.
Select the timer you
wish to set or change with pq and press OK to proceed.
The timer setup menu will now be displayed.
The following settings are available:
Timer Mode: Choose between Off (Timer inactive), Once, Daily
(Timer will be executed every day, same time) or
Weekly (timer will be executed every week, same
day, same time)

P16
MAIN MENU
Timer Service: Choose between Channel (Timer will wake up the
receiver) or Record (Timer will start to record the
scheduled event).
Wakeup Channel: Use tu to select the channel the timer will wake
up with.
Wakeup Date: Use the 0~9 buttons to input the date for the
timed event.
Wakeup Time: Use the 0~9 buttons to input the desired start time.
Duration: Use the 0~9 buttons to input the timer duration.
Once all settings are according to your wishes, use pq to move the highlight to
Save and press OK to confirm. To quit the timer without saving your settings, move
the highlight to Cancel.
7.3.5 Parental Lock
This menu allows you to protect the installation menu and/or channels with a
password. You can also enter a new password in the Parental Lock menu.
Use pq to select Parental Lock from the System Setup menu and press OK to
proceed. You will be asked to enter your pin code. (DEFAULT: 0000)
Menu Lock: Locks the installation menu. You can set Menu
Lock to On or Off.
Channel Lock: Choose between: Off, AGE 4, AGE 5, up to AGE
18. Channels with a parental rating above the
chosen age will be protected with a password (if
available in your local broadcast.)
New Password: Enter your new password (4 digits) here.
Confirm Password: Re-enter your password here to confirm.
7.3.6 OSD Setting
This menu allows you to change settings for: OSD Timeout and OSD Transparency.
OSD timeout: Sets the time after which on screen banners and
messages disappear. The range is 1~10 seconds.
OSD Transparency: To set the OSD transparency from Off ~ 40% with
10% steps.
Load Default OSD Setting: Press OK to clear all OSD settings and reset to
default values.
7.3.7 Favourite
This menu allows you to personalize the names of the 8 available favourite lists.
Use pq to select Favourite from the System Setup Menu and press OK to
proceed. The names of all groups are now displayed. Select the desired favourite
group with pq and press OK to edit its name. A text field will now pop up at the
right of the screen. Use tu pq to select the desired characters and enter them
with OK. Once you have finished editing, press BLUE to save the changes. Once
all changes are made, press EXIT/SORTIE twice.

MAIN MENU
P17
English
7.3.8 Auto Standby
Auto Standby is a new feature that helps you with reducing power consumption.
When set to On, the receiver will turn to standby if it doesn’t receive any commands
from the remote control for three hours. Set Auto Standby to Off to avoid the
automatic shut down.
7.4 Tools
Press MENU in viewing mode to enter the Main Menu.
Select the Tools submenu with pq and press OK or u to enter.
Use pq to highlight the desired submenu and press OK proceed.
Press EXIT/SORTIE to leave.
7.4.1 Receiver Information
This submenu shows receiver specific information such as hardware version and
software version. It also displays our web address www.thomsonstb.net. Please
have the Receiver Information screen on hand when you call our hotline. The
person who answers your call might ask for the information given in this screen.
7.4.2 Load Factory Setting
This option allows you to reset the receiver to factory settings, which clears all
stored channels.
WARNING! By resetting your receiver to factory default, all your settings and
stored channels will be permanently deleted. It will restore your
receiver to an “out of the box” state. Pl
Use pq to select “Load Factory Setting” in the Tools menu and press OK. You are
asked to input password.
Input the correct password using the 0~9 buttons (default: 0000). A confirmation
window is displayed.
Select Yes to return to factory settings. Then, proceed with chapter 4.
Select No if you don’t want to restore.
Press EXIT/SORTIE to leave.
7.4.3 S/W Upgrade by OTA
This receiver is equipped with an Over The Air software upgrade option. An Over
The Air update might not be available in your region. Please visit our website www.
thomsonstb.net or contact your local service hotline for more information about
this option.
7.4.4 Upgrade by USB
This feature allows you to upgrade your receiver’s software via the USB port. If new
software is available for your receiver, it can be downloaded from our website www.
thomsonstb.net.
Place the software file (unzipped) in the root directory of your USB storage device
(HDD, memory stick etc.) and insert this device into the USB port of the receiver.
Select Upgrade by USB from the Tools menu and press OK to proceed.