Tigercat 822C User manual

OPERATOR'S MANUAL
TIGERCAT 822C/L822C/830C/L830C FELLER BUNCHER
822C/L822C/830C/L830C Feller Buncher Available Literature
Operator's Manual (This Manual) .................... Part No. 29525A
Service Manual ................................................ Part No. 29526A
Parts Catalog ................................................... Part No. 29527A
TABLE OF CONTENTS
822C-SM00-2
ISSUE 3.0, JUNE, 2008
Tel: [phone] Fax: [phone]
Tigercat
®
Tigercat Industries Inc.
P.O. Box 544
Paris, Ontario
Canada N3L 3T6
SECTION
INTRODUCTION ................................................................................................................. ii
STANDARDS TOPS, FOPS, OPS.................................................................................... iv
NON-APPROVEDFIELD PRODUCTCHANGES ............................................................... v
SAFETY ............................................................................................................................ 1
USING HIGH SPEED DISC SAWS SAFELY .......................... APPENDIX TO SECTION 1
CONTROLS AND OPERATION ........................................................................................2
LUBRICATION AND MAINTENANCE ...............................................................................3
epcatalogs.com

Tigercat 822C/L822C/830C/L830C Feller Buncher Introduction
ii
epcatalogs.com

Tigercat 822C/L822C/830C/L830C Feller Buncher Introduction
iii
Tigercat 822C/L822C/830C/L830C Feller Buncher
INTRODUCTION
An Operator's manual, Service manual and a Parts catalog are made available by Tigercat to assist the
dealer, customer and operator in becoming familiar with the features of the 822C/L822C/830C/L830C Feller
Bunchers
Serial numbers:-
822C 82211001 to 82211999 (Open Loop)
L822C 82221001 to 82221999 (Levelling, Open Loop)
830C 83011001 to 83011999 (Open Loop, R7150 undercarriage)
L830C 83021001 to 83021999 (Levelling, Open Loop)
NOTE: The 4th digit in the machine serial number indicates the machine model type. For example 1 = Feller
Buncher and 2 = Levelling Feller Buncher. For simplicity throughout this manual the 4th digit has been
replaced with an asterisk to indicate that both types of machine models are affected. ie: 830*1001 TO
830*1999.
The operator's manual will assist the operator with the techniques of proper and safe operation of the 822C/
L822C/830C/L830C Feller Bunchers. There is also important information regarding the safe operation of the
saw head. The service manual contains safety and servicing procedures and a preventive maintenance
schedule to ensure optimum machine performance.
Section 1 in both the operator's manual and the service manual contains safety information that must be
followed. As well, throughout the rest of the manuals, WARNING and CAUTION notices are displayed where
necessary, drawing attention to possible hazards when performing certain procedures.
Only trained personnel should be allowed to operate or work on the machine.
The information contained in this manual is current at time of printing. Improvements to the machine are
on-going and may not be covered, therefore in these cases contact your Tigercat dealer for the
appropriate information.
The phrase “and up” appearing in this manual after the serial number implies that the related information
is current for any machine serial number HIGHER than the serial number preceding the “and up”.
Tigercat reserves the right to make changes to the machine after this manual release date that may not
immediately appear in this manual.
Every effort is made to send out updates on a regular basis. If the machine in question was built after the
release date of this manual and there is a discrepancy, call Tigercat service department. The release date
appears on the first page.
The Company reserves the right to change information contained herein at any time without prior notice.
Tigercat Industries Inc.
epcatalogs.com

Tigercat 822C/L822C/830C/L830C Feller Buncher Introduction
iv
THIS OPERATOR ENCLOSURE MEETS THE FOLLOWING STANDARDS:
OREGONOSHA437-007-0775:14aTIP-OVERPROTECTIONSTRUCTURES(TOPS)
ISO8084: 1993OPERATOR PROTECTIONSTRUCTURES(OPS)
ISO8083: 1989FALLING OBJECTSPROTECTION STRUCTURES(FOPS)
ISO 3411: 1995
ISO 2867: 1994
SAEJ1356: FEB1988
OREGONOSHA437-007-0775:14b,c
* MODIFICATIONS AND REPAIRS:
The integrity of the TOPS, FOPS, OPS structure and its continued ability to provide the level of protection it
was designed for could be seriously affected by any modifications to the structure, its mounting or to the
chassis to which it is attached.
Tigercat emphasizes that the certification of approval of the TOPS, FOPS, OPS structure will become void
if any such modifications take place.
Tigercat may officially grant approval for modifications only by:
i) Written approval of repairs or modifications signed by the Tigercat Engineering Manager; or
ii) Approved modifications officially released by Tigercat.
Both of the above are provided that the work is carried out in the factory approved manner.
Unauthorized modifications and/or repairs made or contributed to by a customer or a Tigercat distributor
may result in creating a dangerous situation and therefore the customer or Tigercat distributor will be
considered to have assumed the risk involved or be negligent in creating this situation.
Tigercat will not be held responsible for situations arising from having created unauthorized modifications/
changes to the structure.
Operator's cabs are designed to TOPS, FOPS, OPS standards so that they will withstand force and absorb
energy during a tip-over (TOPS), when resisting the impact of a falling object (FOPS) and minimize the
possibility of operator injury from penetrating objects (OPS). When a permanent deflection of the structure
occurs, the structure can no longer provide the original designed level of protection and should be replaced.
Attempts to straighten the structure, particularly by the application of heat, can reduce still further the
structures remaining capability to protect.
The mounting and the frame or chassis to which the cab is attached is considered an integral part of the
TOPS, FOPS, OPS and is included in the design, test and certification of the product.
Contact the Tigercat Service department before attempting any modifications or repair to tip-over protective
structures.
Tigercat Industries Inc.
THIS OPERATOR ENCLOSURE
IS DESIGNED FOR USE ON ALL
Tigercat ® 800 SERIES MACHINES
WITH A MAXIMUM OPERATING
MASS OF 42200 Kg (93000 lb).
THIS STRUCTURE MEETS
THE FOLLOWING STANDARDS:
Oregon OSHA 437-007-0775:14a (TOPS)
ISO 8084: 1993 (OPS)
ISO 8083: 1989 (FOPS)
ISO 3411: 1995
ISO 2867: 1994
SAE J1356: FEB 1988
Oregon OSHA 437-007-0775: 14b,c
24346A R0
MANUFACTURED BY
Tigercat Industries Inc.
Paris, Ont., Canada
NOTICE OF
CERTIFICATION
ALTERING THIS OPERATOR ENCLOSURE
IN ANY WAY MAY CAUSE
NON-COMPLIANCE WITH
THESE STANDARDS
epcatalogs.com

Tigercat 822C/L822C/830C/L830C Feller Buncher Introduction
v
NON-APPROVED FIELD PRODUCT CHANGES
The installation of any unauthorized attachment or changes made of any kind to this Tigercat product
could affect the product's ability to perform as originally intended. The product's integrity, stability and it's
ability to perform safely could be at serious risk.
IT IS Tigercat POLICY THAT NO CHANGES ARE TO BE MADE TO ITS PRODUCTS INCLUDING
DELETIONS OR ADDITIONS OTHER THAN A Tigercat APPROVED OPTION FITTED IN THE
FACTORY APPROVED MANNER.
Official approval to make changes or install options is only to be undertaken as follows:
i) The relevant options for that product must be shown or listed on current Tigercat documentation or
literature such as a printed specification sheet, price list, parts manual, or product literature issued by
Tigercat.
ii) Approved options or product changes authorized in writing by the Tigercat Engineering Manager.
AUTHORIZATION BY ANY OTHER PERSON IS UNACCEPTABLE.
Unauthorized changes made or contributed to by a person or organization may result in creating a
dangerous situation and therefore the person or organization will be considered to have assumed the risk
involved or be negligent in having created this situation.
Weight is an important factor when considering the addition of options or an attachment, Refer to your
Tigercat distributor for information on maximum permissible operating weight and the effect the addition
of various options may have on your machine.
Tigercat will not be held responsible for any situation that may arise resulting from Non-approved Field
Product Changes to its product.
Should Tigercat become involved in a dispute resulting from changes made to the product without proper
authorization by Tigercat as stated above, Tigercat will take whatever action is appropriate to protect its
interests.
The product warranty policy and the certification on any safety items installed on the modified product will
become NULL and VOID if the above policy is not adhered to as specified.
Non-approved product changes also nullify warranties given to Tigercat by its component manufacturers.
Tigercat Industries Inc.
epcatalogs.com

Buy now
Tigercat Feller Bunchers 822C, L822C, 830C, L830C Operator’s
Manual PDF
With Instant Download