Timago FS 681 User manual

1
INSTRUCTIONS FOR USE
Wheelchair with toilet function
Product code: FS 681 / FS 681U
1. Characteristics
Wheelchair with toilet function is made of chromed steel frame. The
seat is available in two versions: full seat with toilet seat (FS681) or full
seat with wedge without toilet seat (FS681U). They are both made of
plastic material resistant to dirt and water. The wheelchair is equipped
with flip-up and detachable armrests in a long version. The wheelchair
is supplied with solid rubber wheels and durable spokes. The footrests
are available in standard swing away version.Rear wheels are 22’’ and
front wheels are 6’’ in diameter. The wheelchair is additionally
equipped with removable toilet bucket.
The set includes:
•Frame with seat
•Right footrest with footplate
•Left footrest with footplate
•Protective strap
•Set of keys for wheelchair
assembly/dismantling
Elements of the wheelchair:
a. Hand grip
b. Armrest
c. Locking pin of the armrest
d. Toilet bucket
e. Wheel lock
f. Handrim
g. Footrest
h. Assembly pin of the footrest

2
2. Application
Wheelchair with toilet function is designed for people who have
problems with unassisted moving and for patients with dysfunctions
and reduced mobility. This self propelled wheelchair can also be
pushed by an accompanying person. It is suitable for indoor use only.
The wheelchair functions as a toilet owing to the toilet bucket located
under the seat. It facilitates the user everyday hygiene. The wheelchair
can be handled by the user or by the accompanying person. The
wheelchair is especially recommended to people who problems with
mobility have caused by:
•paralysis
•overweight or abnormal underweight
•degenerations or deformity of limbs
•degenerations or joints injuries
•limbs injuries or amputations
•heart and blood vessels disease, circulatory disorders
3. Assembly
UNFOLDING AND ASSEMBLY
Step 1. Unfolding the wheelchair
Place the wheelchair on the ground. Unfold the wheelchair using the
hand grips which are at the back of the backrest. Then, press the front
and rear edge of the seat so that all the elements fit together.
Assemble the toilet seat, seat or seat with wedge (FS681U) on the
frame.
Step 2. Assembly of toilet bucket
From the front slide the toilet bucket without the lid into the rails
which are located under the seat.
Step 3. Assembly of footrests
Assemble the right and the left footrest in the front part of the frame
by placing them on two pins and turn them inwards until they are
locked.

3
Step 4. Adjustment of footplates
Adjust the right and the left footplate by tightening the screw placed at
the bottom of footrest with included key. Adjust the footplates so that
the angle between trunk and thighs is 90o.
Step 5. Assembly of protective strap
Put the protective strap on the footrests as it prevents sliding down
user’s legs under the wheelchair from footplates.
Note! Do not use the wheelchair without protective strap.
On completion of the above activities, the wheelchair is ready to use.
FOLDING
•To fold the wheelchair, remove the toilet bucket first, and
disassemble the seat (and toilet seat – FS681).
•Before folding, swing away the footplates and set them in vertical
position (perpendicularly to the ground).
•Grab the straps which are on the both sides of seat frame and pull
them upwards until the frame of the wheelchair is folded.
FLIP-UP FUNCTION OF ARMRESTS
•Push sideways the locking button located in the front part of the
armrest and push the armrest backwards.
•To close the armrest, push it downwards so that the locking
button clicks.
WHEEL LOCKS
•To lock the wheels, push the wheel lock lever forwards until the
wheel is fully blocked (separately for left and right wheel). Please,
note that the wheel lock only serves to lock the wheel when the
wheelchair is at a complete stop.
WHEEL LOCKS ADJUSTMENT
The correct lock of the wheel lock depends on its adjustment and
position. The handle of the wheel lock should be positioned so that the

4
wheel lock shoe blocks the wheel firmly and the lever does not face
excessive resistance.
•In case of excessive resistance, pull the handle forwards slightly by
twisting off the locking screw which is located on the other side of
the wheel lock (from the inside of the wheelchair). Set the wheel
lock shoe in such position that the wheel lock blocks the wheel
easily without resistance.
•When the wheel lock shoe does not touch or lock the wheel
sufficiently, follow the above instruction by moving the handle in
the opposite direction.
4. Technical data
Overall width
60 cm
Inner width
45 cm
Overall depth
102 cm
Seat height from the ground
51 cm
Overall height
90 cm (86 cm)
Seat dimensions
44 cm x 44 cm
Weight
19.6 kg
Maximum capacity
100 kg
Folded width
23 cm
Frame colour
silver-chrome
5. Notes
Timago International Group does not bear responsibility of improper
moving in the wheelchair, failure to comply safety regulations and
misuse.
6. Cleaning and maintenance
Carry out the maintenance of the wheelchair components regularly:

5
•The upholstery and the cushion can be cleaned with damp (not
wet) cloth and cold or warm water, without the use of detergents.
Difficult stains can be cleaned with a sponge. Do not soak the
upholstery too much. Dry away from heat sources.
•Plastic elements should be cleaned with damp cloth possibly with
the use of appropriate detergents for plastic elements. In such
case follow the instructions given by the producer and safety
measures.
•Empty and disinfect the toilet bucket and toilet seat after each
use. Use cleaning agents according to producer’s
recommendations.
7. Storage and transport conditions
Device should not be exposed to direct sunlight, water or moisture.
8. Warranty information
All products distributed by our company are covered by a warranty, the
terms of which are described in the warranty card available on our
website. Please contact the retailer from whom you purchased the
product. Please, keep in mind that for warranty purposes, the proof of
purchase (receipt or invoice) should be retained
9. Labels
Reference
number
Manufacturer
LOT number Manufacture date
Serial number Medical device
Note
Please read the
instruction

6
The manufacturer checked for compliance with
essential medical devices requirements.
Our complete line of products is available from our distributors.
Learn more at: www.timago.com. Thank you for choosing Timago!
Timago International Group
Spółka z o.o. i Spółka – Spółka komandytowa
ul. Karpacka 24/12
43-316 Bielsko-Biała, Polska
T.: [phone]
F.: [phone]
E.: [e-mail]
Rev. II, date 20.05.2021