Timago T101 User manual

USER MANUAL
Aluminium wheelchair
Product code: T101
Dear Customers,
Thank you for purchasing our product. We hope that the equipment you have
selected will meet your expectations. We would like to share some important
information with you.
Timago International Group is a Polish company which distributes medical,
rehabilitation and orthopaedic products to pharmacies and medical stores.
Our mission is to ensure your comfort by offering safe, functional, and high-quality
products. We have many years of experience in this sector. Timago products reach a
wide range of users in Poland and throughout Europe through our distributors
(medical retailers).
Timago’s company culture promotes openness to your needs. Our goal is to
promote safe and correct use of our products for treatment and rehabilitation in
order to improve comfort and quality of life.
We invite you to access our website for more information: timago.com.

INDEX
INTRODUCTION
GENERAL PRESENTATION
1.1 Parts of the chair
1.2 Presentation and Adjustments
1.3 Options and Accessories
I. SECURITY AND USE
1.4 General safety procedures
1.5 General usage tips
1.6 Maintenance
II. TRANSPORT OF THE CHAIR
III. TECHNICAL CHARACTERISTICS
IV. Warranty information
V. Labels
VI. Recommended products

INTRODUCTION
Thank you for purchasing our chair for the Disabled. In the market there are several
models and types of chairs, each with different functions, accessories and
performances. Please consider the following three items when buying a chair in
addition to its quality and benefits:
User's ability.
Adaptability of the wheelchair.
Adaptability of accessories.
We advise you to familiarize yourself with this instruction manual for correct use and
maintenance of your wheelchair.
The chair is intended for people with walking limitations and people who have the
ability to propel themselves with their upper limbs and especially to seniors because of
their light weight.
The maximum authorized user weight for this chair is 110 kg
BE CAREFUL WITH THE ENVIRONMENT
FOLLOW LOCAL REGULATIONS AT THE TIME OF DISPOSAL OF THE PRODUCT.
Design and specifications are subject to change without prior notice.

1.1 Parts of the chair
1.2 Presentation and Adjustments
Backrest height adjustment
The backrest adjustable in height.:It allows lowering the backrest to offer more
mobility. Choose between comfort (high back) and mobility (low back). The correct
height of the backrest depends on the degree of injury, sensitivity, balance ability,
techniques and physical conditions of the user of the chair; With the exception of a
few special cases, the general rule is: the higher the lesion, the greater the need for
good stability and better balance, as well as higher support.
Seat width
The most frequent failure to select a wheelchair is that the seat width is not
correct. In the past there were one or two maximum widths, which should be fine
1. Handle
7. Footrest
2. Quick release
8. Rear wheel
3. Manual brake
9. Front wheel
4. Cross brace
10. Footrest strap
5. Backrest upholstery
11. Footplate
6. Seat upholstery
1
2
3
4
5
6
7
8
9
10
11

for all; But our system offers a chair just for you. Our chairs are available in 40-42
and 45 cm.
Seat height
In this chair, the height of the seat is adjusted with the rear wheel support bracket
where the axle is. Once the height of the seat is adjusted at the rear, adjust the
front part correctly and properly so that the seat is not tilted forward or too far
back.
Change the fork or change the position of the front wheel by choosing another
hole in the fork.
The purpose of the height adjustment of the seat is to maximize the efficiency of
the user, adapting it to the environment, according to their physical and
mechanical needs.
Adjusting footrests
The footrests are folding inwards for easy transfer. The footplate of the footrest is
adjustable in degrees of inclination.
Note: To remove the footrest, squeeze the trigger toward the chair, rotate the
footrests outward or inward, and raise them.
To install the footrests, place the plastic pivot on the tubing in front of the seat,
turn the footrests inward, until you grasp the locking bolt
Fixing system-adjusting rear wheel
The fixing-adjustment system is the most important adjustment for the
wheelchair, because it determines the center of gravity, the rotation of the chair,
the degrees of the wheels and the height of the seat. The center of gravity is
determined by the user's position on the chair. You can change its vertical
coordinate by changing the height of the seat, but the higher the seat, the more
unstable the seat.
The position of the rear axle with respect to the horizontal coordinate of the center
of gravity determines the ease of propulsion and handling of the chair, but also the
subsequent stability.
Arm rests
To allow easy access to each side of the chair, the armrests are folded back. Check
that they are locked when they are replaced.
1.3 Options and Accessories
Optional
Small transit wheel
Quick release
Seat cushion

I. SAFETY AND USE
SECURITY
2.1. Up and Down of the Chair
2.2.Catch and Leave the wheelchair
2.3.Overcoming Obstacles
Brake the wheels every time
you raise the chair and if
necessary, ask for help from
an assistant
Return when moving objects forward
Loss of balance in case of moving objects to the sides
Return when moving objects behind the backrest.
Return when moving objects behind the backrest.
Avoid bending too far down, or
sideways, or backward, to catch or
SOLIT objects. There is a risk of
overturning or losing balance
especially if the chair has a reduced
seat and / or a high seat height (eg
cushion)
Make sure that the front wheels are
in the front and the rear wheels
braked when sitting on the
wheelchair transferring to another
location (chair, bed, etc.).
Ask for an assistant, as long as you
have to overcome obstacles greater
than 5 cm.
Without help: the chair can tip over
causing damage to the person and
the chair; The chair may become
blocked and the rear wheels may be
suspended in the air.

2.4.Ups and downs
2.4.1.Going up
2.4.2. Going down
2.5.Up and down stairs
To climb up a ladder Once the chair is tilted
backwards by a person holding the chair by the
handles, the rear wheels rest on the steps The
second person must hold a fixed part of the front
area of the chassis, lift the chair Above the step
and hold it until the first person stands on the next
step and so on.
Do not release the chair until you have crossed
the last step and are away from the ladder.
Prepare for climbing.
Do not hang anything above the backrest
or above the cuffs.
Dispose the chair to tip over.
To go up hills you only install the anti-
tippers. To this end insert the anti-tippers
into the rear tube and take care that the
safety clip comes out of the hole in the rear
tube.
Please help, when going down a slope.
Attention that the wheels are not blocked
on the ground, going down a slope
Before lowering a curb by yourself, consider your height very well. In fact, if the
curb is too high, you have the risk of overturning. The risk of overturning
increases as the slope angle increases.

2.6. Using an Elevator
USE.
Practice: For the safety of your wheelchair, in and out of the house, you need to gain
confidence in the main maneuvers, such as pushing, braking, driving back and forth on
flat surfaces (possibility with the help of an assistant) . At first avoid slopes, uneven
surfaces and similar situations.
Crossing Narrow Steps: When driving through narrow spaces, for example through
entrances to buildings, doors etc. Pay attention to the elbows. - Danger of getting hurt!
2.4. Maintenance
Tap: Check that the upholstery has no cuts, is not torn or heavily used. Replace
if necessary.
Cleaning: Do not clean any part of the chair with abrasive or detergent
products or detergents. Wash the chair with water and neutral soap. Rinse with
clean water. Lubricate moving parts and joints to prevent corrosion.
Brakes: Operate both brakes simultaneously when you get in / out of the
wheelchair. Regularly adjust the brakes by loosening the two screws for this
purpose.
Wheels: Periodically check wheels, bearings and nuts.
Automatic door closing can cause hand injuries!
oReplace full brake when worn or defective.
oAll plastic parts deteriorate when exposed to this wheelchair. For a
longer life of your chair and upholstery, do not expose the chair directly
to it for a long time.
oWe are not responsible for damages caused by improper use of the
wheelchair.

II. TRANSPORT OF THE CHAIR
Although the method to be followed for the transport of the chair is not unified
1. Remove the footrests
2. Removing the armrests
3. Remove the wheels in case they will take quick release
4. Hold the chair by pulling on the handles on the sides of the seat
until the chair is fully folded
5. Put it into a car.
III. TECHNICAL CHARACTERISTICS
DESCRIPTION
MEASUREMENT
(cm)
Rear wheel
600mm
MEASUREMENT (cm)
Rear wheel
315mm
Overall length
103
90
Height
93/95.5
91/93.5
Seat Depth
42
42
Seat height
Front height
52
52
Floor to seat height
49
49
Weight Capacity
120 Kg
120 Kg
Armrests height
23
23
Seat width
40-42-45
40-42-45
Overall Width
59-61-64
56-58-61
Folded Width
26
26
Length without footrest
83
68
Full weight
15 kg
12.7
Back height
40
40

IV. Warranty information
All products distributed by our company are under a warranty, the terms of which
are described in the warranty card received at the time of purchase.
Please, keep in mind that for warranty purposes, the proof of purchase (receipt or
invoice) should be retained.
As a user friendly company, we only supply products which have been thoroughly
tested with respect to materials, quality and functionality.
Please contact us if you have any questions concerning our servicing procedure.
V. Labels
Reference number
Manufacturer
LOT number
Manufacture date
Serial number
Representative in Euro-
pean Union
Note
Please read the
instruction
The Manufacturer checked for compliance with
essential medical devices requirements.
VI. Recommended products
Products offered by Timago International Group include:
Orthoses and joint stabilizers
Manual and special-use wheelchairs
Walkers and walkers
Crutches and canes
Rehabilitation beds
Ancillary and sanitary equipment
Anti-decubitus equipment and accessories
Stabilizing and immobilizing belts
Electro-medical equipment
Disposable medical equipment

Our complete line of products is available from our
distributors. Learn more at: timago.com
Manufacturer:
Timago International Group
Spółka z o.o. i Spółka – Spółka
komandytowa ul. Karpacka 24/12
43-316 Bielsko-Biała, Polska
T.: [phone]
F.: [phone]
E.: [email protected]
Issue I, date 05.03.2020