Timago MASTER-TIM User manual

Strona 1z 8
INSTRUCTIONS FOR USE
Shower and commode transport chair 3in1
Product code: MASTER-TIM
1. Characteristics
Shower and commode transport chair is made of powder coated
aluminum frame. It features flip-up armrests for easy entry and exit for
people with reduced mobility. It is equipped with a seat with wedge
made of PU, four swivel 5" wheels with brakes, tiltable footrests and a
sanitary container. The construction of the chair makes it possible to
slide over the toilet seat.
The set includes: frame, seat, four swivel 5” wheels with brakes, four
C-type mounting buckles, backrest with armrests, two backrest locking
pins, right and left footrest with footplate, sanitary container with lid.
Elements of the chair:

Strona 2z 8
Figure 4
Figure 2
Figure 3
Figure 1
2. Application
Shower and commode transport chair is designed for people who have
problems with unassisted moving and for patients with dysfunctions
and reduced mobility. The chair is suitable for indoor use only. The
chair may only be used with the assistance of an accompanying person.
The chair functions as a shower and commode transport chair owing to
the sanitary container located under the seat and four swivel castors. It
facilitates everyday hygiene activities. The chair is especially
recommended to people who have problems with mobility which are
caused by: paralysis, overweight or abnormal underweight,
degenerations or deformity of limbs, degenerations or joints injuries,
limbs injuries or amputations, heart and blood vessels disease,
circulatory disorders.
3. Assembly

Strona 3z 8
Figure 7
Figure 6
Figure 5
Figure 1. Install the four wheels into the main frame. Align the holes at
the desired height and lock each wheel with a C-type buckle.
Note! All wheels must be set at the same height.
Figure 2. Insert the footrests into the main frame from the side, and
then rotate it to the front until the footrest latch locks in place.
Figure 3. Fix the seat on the frame of the chair by pressing it until it
locks into place (the front of the seat is indicated by the wedge).
Figure 4. Mount the backrest with armrests in the holes at the back of
the frame. Align the holes and lock them with the two backrest locking
pins.
Figure 5. Insert the sanitary container into the slides from the back of
the seat.
Figure 6. The chair has a 4-step height adjustment.
Note! All wheels must be set at the same height.
Figure 7. The footrests have a 3-step height adjustment - adjustable by
the locking knobs.
The product is ready for use.

Strona 4z 8
CHAIR HANDLING
•Check the condition of the brakes, construction and castors. Check
the proper assembly of the components and their adjustment.
•Before using, make sure that the chair width matches the user, as
the chair is not equipped with width adjustment.
•The chair is designed to be used on short distances and inside
only. The chair doesn’t have a shock absorber so long-term use is
not recommended.
Note! Do not use the chair if any defects or deficiency are noticed.
FLIP-UP FUNCTION OF ARMRESTS
•Lift the armrest upwards with a gentle movement.
•Do not use the armrest as a support while standing up. If help is
required – ask for assistance.
BRAKES
To lock the castors, press the red pedals with your foot. To unlock the
wheel, press the black levers inside the red pedals with your foot.
FOOTRESTS
•The footplates should be in vertical position when getting in or
out of the chair. Do not use the footplates as a support while
getting in or out of the chair due to the risk of falling over.
GETTING ONTO THE CHAIR
•It is essential to lock the brakes while getting in or out of the chair,
changing the user’s position or getting off.
•While changing place, the chair should be located as close as
possible to the place of transfer. The chair should touch the bed
or other seat being used. If the user cannot change his/her seat
independently, transfer the user to the chair.

Strona 5z 8
•The user should sit as deep as possible in the middle of the seat in
order to avoid chair instability.
4. Technical data
Overall width
57 cm
Inner width
45 cm
Overall depth
86 cm
Seat height from the ground
49-56,5 cm
Overall height
94-101,5 cm
Seat dimensions
44 x 43 cm
Weight
11,4 kg
Maximum capacity
150 kg
Frame color
white
5. Notes
Timago International Group does not bear responsibility of improper
use of the chair and failure to comply safety regulations.
6. Cleaning and maintenance
Carry out the maintenance of the chair components regularly:
•The seat can be cleaned with a damp cloth and cold or warm
water, without the use of detergents. Difficult stains can be
cleaned with a sponge.
•Plastic elements should be cleaned with damp cloth with the use
of appropriate detergents for plastic elements. In such case follow
the instructions given by the producer and safety measures.
•Empty and disinfect the toilet bucket and toilet seat after each
use. Use cleaning products according to producer’s
recommendations.

Strona 6z 8
7. Storage and transport conditions
The product should not be exposed to direct sunlight.
8. Warranty information
All products distributed by our company are covered by a warranty, the
terms of which are described in the warranty card available on our
website. Please contact the retailer from whom you purchased the
product. Please, keep in mind that for warranty purposes, the proof of
purchase (receipt or invoice) should be retained.
9. Labels
Reference
number
Manufacturer
LOT number Manufacture date
Serial number Medical device
Note
Please read the
instruction
The manufacturer checked for compliance with
essential medical devices requirements.
Our complete line of products is available from our distributors.
Learn more at: www.timago.com.
Thank you for choosing Timago!

Strona 7z 8

Strona 8z 8
Timago International Group
Spółka z o.o. i Spółka – Spółka komandytowa
ul. Karpacka 24/12
43-316 Bielsko-Biała, Polska
T.: [phone]
F.: [phone]
E.: [e-mail]
Rev. II, date 30.06.2022