Timago KING-SSBA-20 User manual

1
USER MANUAL
Shower chair with backrest and armrests
Product code: KING-SSBA-20
Dear Customers,
Thank you for purchasing our product. We hope that the equipment you have selected will
meet your expectations. We would like to share some important information with you.
Timago International Group is a Polish company which distributes medical, rehabilitation and
orthopaedic products to pharmacies and medical stores.
Our mission is to ensure your comfort by offering safe, functional, and high-quality products.
We have many years of experience in this sector. Timago products reach a wide range of
users in Poland and throughout Europe through our distributors (medical retailers).
Timago’s company culture promotes openness to your needs. Our goal is to promote safe
and correct use of our products for treatment and rehabilitation in order to improve comfort
and quality of life.
We invite you to access our website for more information: timago.com.

2

3
1. Introduction
Prior to use of our products you should inspect the equipment for any defects which may
have occurred during transport. If this happens, please contact your retailer.
Then, please read this instruction which includes important information for the user.
Please contact us if you have any questions concerning the use of the equipment. Our
advisors will provide you with any information you require on an ongoing basis.
Please note that if you have questions other than those concerning the use of our products,
you should contact your doctor, nurse or physical therapist.
2. Characteristics
Shower chair with backrest and armrests consists of wide seat and backrest made of durable
PVC and height adjustable aluminium legs. Integrated handles facilitate using the product
and specially designed rubber tips prevent the chair from sliding on wet surfaces.
The set includes:
•PVC seat – 1 pc
•PVC backrest – 1 pc
•Elements of backrest frame – 2 pcs
•Mounting screws length 30mm – 4 pcs
•Mounting screws length 45mm – 4 pcs
•Height adjustable legs – 4 pcs
•Locking clips – 4 pcs
•Anti-sliding tips – 4 pcs
•PVC armrests – 2 pcs
•Mounting elements of armrests – 2 pcs
•Mounting knobs of armrests – 2 pcs
3. Application
The shower chair with backrest and armrests is ancillary equipment which helps the user to
perform hygienic activities. The chair is recommended to people with reduced mobility
which prevents or hinders the unassisted performance of daily living activities. The chair can

4
be used in the shower, in the bath, in bathrooms and other humid rooms at home and in
hospitals.
4. Assembly and general recommendations for use
Note! Follow the information contained in this manual while assembly and adjustment.
Users with reduced mobility may need help from a third person who has appropriate skills.
Note! Do not use the shower chair when you notice any visible or perceptible damage (e.g.
crack) as this may cause an accident.
Note! Before first use, check the correctness of the assembly.
ASSEMBLY
Step 1. The legs were inserted for transport
purposes. Before assembly, extend them by
pushing the ending of the leg without plastic
casing. When metal pin is placed into the first
adjustment opening, it will make characteristic
sound.
Step. 2 Place seat upside down on a flat surface. Place
legs into the mounting openings so that the height
adjustment clip points outwards.
Step 3. Fix orange locking clips into the side mounting
openings.
Step 4. Fix anti-sliding tips.

5
Step 5. Tighten the PVC backrest to the elements of
the backrest using four shorter mounting screws
(30mm) and Allen wrench (5 mm).
Step 6. Tighten elements of backrest frame to the
seat using four longer mounting screws (45mm)
and Allen wrench (5 mm).
Note! Ensure the elements of backrest frame are mounted at the back of the seat – the rear
part of the seat is narrower than the front part.
Step 7. Place the armrests into proper openings in the seat. From the bottom of the seat fix
mounting elements and tighten them by mounting knobs.

6
HEIGHT ADJUSTMENT
•To adjust the height of the
shower chair, press metal pin,
select appropriate height of leg,
and lock the position of the
tubes relative to each other with
the use of locking pin. The legs
are adjustable in 2.5 cm
increments.
Note! The pins must be set on the same level in each leg.
5. Technical data
Seat dimensions 50 x 30 cm
Height adjustment 39-54 cm
Weight 3.20 kg
Maximum capacity 150 kg
6. Notes and recommendations
•Patients with reduced mobility require help from a third person.
•Do not exceed maximum capacity of the chair (150 kg).
•Do not stand on the shower chair.
•Do not lean on the chair for purposes other than standing up and sitting down.
•Do not attach any objects to the chair as it may cause an accident.
•Only one person can use the chair during hygienic activities.
•Remove all potential obstacles in the bathroom and make sure that the floor is flat.
Slippery floor should be secured with e.g. anti-slip mats.
•The chair is designed to be used only on flat surfaces.
•Due to the risk of falling, it is unacceptable to use the chair on surfaces that do not
provide firm support.

7
•Do not make any repairs or modifications by yourself. Any repairs should be done by
qualified personnel of the manufacturer.
•Do not store the chair in rooms with very high humidity (bath-houses, laundries,
etc.), in the temperature below zero and in the open air.
NOTE! Timago International Group does not bear responsibility of improper use of the
shower chair, failure to comply safety regulations and misuse.
7. Maintenance
•Clean the shower chair regularly using only water, sponge and mild detergents for
plastic materials such as soap. Dry thoroughly.
•Do not use for cleaning: strong detergents, abrasive agents, bleach, petrol or
solvents (it may cause frame damage, visible defects and in consequence - loss of
warranty rights).
•At least once every three months check:
-condition of locking pins and clips
-condition of tubes (if cracks)
It is recommended to check the rubber tips regularly. In case of worn-out, replace the
tips with the new ones.
8. Warranty information
All products distributed by our company are under a warranty, the terms of which are
described in the warranty card received at the time of purchase.
Please, keep in mind that for warranty purposes, the proof of purchase (receipt or invoice)
should be retained.
As a user friendly company, we only supply products which have been thoroughly tested
with respect to materials, quality and functionality.
Please contact us if you have any questions concerning our servicing procedure.

8
9. Labels
Reference number Manufacturer
LOT number Manufacture date
Serial number
Representative in Euro-
pean Union
Note
Please read the
instruction
The Manufacturer checked for compliance with
essential medical devices requirements.
10. Recommended products
•Products offered by Timago International Group include:
•Orthoses and joint stabilizers
•Manual and special-use wheelchairs
•Walkers and rollators
•Crutches and canes
•Rehabilitation beds
•Ancillary and sanitary equipment
•Anti-decubitus equipment and accessories
•Stabilizing and immobilizing belts
•Electro-medical equipment
•Disposable medical equipment
Our complete line of products is available from our distributors.
Learn more at: timago.com.

9

10
Manufacturer:
LM GLOBAL Design Limited
Suite 74, Guinness Enterprise
Centre, Taylor’s Lane,
D8 Dublin, Ireland
Issue I, date 19.11.2018