TIME LED 300967 User manual

TIME LED is part of Pitacs Limited. For customer support contact:
Bradbourne Point, Bradbourne Drive, Tilbrook, Milton Keynes, Buckinghamshire MK7 8AT
T: [phone] F: [phone] E: [e-mail] W: www.TIMELED.co.uk
Installation and Operating Instructions
Safety:
• Electrical work, including installation and repair, must always be completed by a qualied technician.
• Disconnect the lamp from the mains supply and let the product cool down before you replace the light source.
• Never touch the light source when the lamp is turned on.
• In case of product failure, disconnect the lamp from the mains supply.
• The product is suitable for connecting through to multiple units up to a maximum of 500W.
INS-300967-V1
Elements Storm Batten 5ft 60W - Connect
60W 7200
LUMENS
3 YEARS
WARRANTY
Please read and follow the instructions before operating your light
and save this manual for future reference.
Package includes:
1 x Elements Storm Batten 5ft 60W - Connect
1 x Cable Gland
2 x Mounting Bracket
4 x Screws
4 x Wall Plugs
1 x Manual
Features:
• Equipped with rubber protection Gland and nylon cover protector
• Wiring specication: only use H07RN-2 x 1.0mm2 (WARNING: Do Not Use PVC Cable)
• LED Lamp
• Class II Luminaire.

X4
X4
X2
X1
Application:
Suitable for use in:
• Outdoor and moisture exposed environments
• Indoors
Accessory Pack Includes
1 x Cable Gland 2 x Mounting Bracket
4 x Screws 4 x Wall Plugs
1) Afx mounting brackets in a suitable location and to a suitable surface.
Installation:
Fig. 2
Product Code 300967
Size (mm) 1530x68x65
Lamp SMD
Watts 60W
Lumens 7200lm
Lifespan 30,000 Hours
Beam Angle 120°
Colour Temp 5000K Daylight
Material PC
Dimmable No
Voltage/Hertz 170-265V 50Hz
Warranty 3 Years
IP Rating IP65
Energy Rating E

3) This product can be daisy-chained to a maximum of 500W.
2) To connect the product:
• Twist the waterproof lock anti-clockwise and pull open the power connection carrier.
• Insert the power cable through the IP Gland.
• Lift the levers on the connectors and insert the live (brown) and neutral (blue) cable as shown.
• Tighten the IP Gland, re-insert the power connection carrier and tighten the waterproof lock clockwise.
4) To daisy-chain the product:
• To access the output carrier, remove the plastic bung and screw in the supplied Cable Gland.
• Twist the waterproof lock anti-clockwise and pull open the power connection carrier.
• Insert the power cable through the IP Gland.
• Lift the levers on the connectors and insert the live (brown) and neutral (blue) cable as shown.
• Tighten the IP Gland, re-insert the power connection carrier and tighten the waterproof lock clockwise.
See Fig. 3.
Fig. 3
Fig. 4
L N
2*1.0mm²
press
Power
Max 500W
......

Full technical specification available upon request. Contact [e-mail] for PDF.
Elements Storm Batten
5ft 60W - Connect
Cleaning:
• Do not use any chemical or abrasive cleaners.
• Only clean the product with a soft dry cloth.
Warning:
• This product must be disconnected from the circuit if subjected to any high voltage or insulation resistance testing.
Irreparable damage will occur if this instruction is not followed.
Recycling Advice:
• Electrical products should not be disposed of with household waste. Please check with your local authority or retailer
for responsible recycling advice.
Warranty:
• This product is warranted to be free of defects in materials, design and workmanship for 3 years from the date of
purchase (conditions apply, please see TIME LED website for further details). If a suspected fault should develop in this
time, please contact us via the address below.