Titan Fitness X-3 User manual

1
Extensions for X-3
Power Rack
Owner’s Manual

2
ASSEMBLY INSTRUCTION
1. Attach the Foot Tubes (4) to the Gusset Plates (5):
Attach the Foot Tubes (4) to the Gusset Plates (5) using M16x110 Hex Bolt (8), M16 Flat
Washer (11), M16 Spring Washer (10), and M16 Hex Nut (9). The order for assembly is
M16x110 Hex Bolt (8), M16 Flat Washer (11), then push the bolt through the Gusset Plate
(5) and Foot Tube (4), Gusset Plate (5), M16 Spring Washer (10), and then place the M16
Hex Nut (9) onto the end of the hex bolt. Tighten the M16 Hex Nut (9) until the M16 Spring
Washer (10) is compressed. Repeat this process for the remaining bolt connection on the
Foot Tube (4) and for the remaining Foot Tube (4).
2. Attach the Upright Tubes (1) to the Foot Tubes (4):
Attach the Upright Tubes (1) to the Foot Tubes (4) using M16x110 Hex Bolt (8), M16 Flat
Washer (11), M16 Spring Washer (10), and M16 Hex Nut (9). Center the Upright Tube (1)
between the Gusset Plates (5). The order for assembly is M16x110 Hex Bolt (8), M16 Flat
Washer (11), then push the bolt through the Gusset Plates (5) and Upright Tube (1), M16
Spring Washer (10), and then place the M16 Hex Nut (9) onto the end of the hex bolt.
Tighten the M16 Hex Nut (9) until the M16 Spring Washer (10) is compressed. Repeat this
process for the remaining bolt connection on the Upright Tube (1) and for the remaining
Upright Tube (1).
Step 1 & 2

3
3. Connect the Upright Tubes (1) with the Top Transverse Tube (3):
Connect the Upright Tubes (1) with the Top Transverse Tube (3) using M16x110 Hex Bolt
(8), M16 Flat Washer (11), M16 Spring Washer (10), and M16 Hex Nut (9). The order for
assembly is M16x110 Hex Bolt (8), M16 Flat Washer (11), then push the bolt through the
Upright Tube (1) and Top Transverse Tube (3), M16 Spring Washer (10), and then place the
M16 Hex Nut (9) onto the end of the hex bolt. Tighten the M16 Hex Nut (9) until the M16
Spring Washer (10) is compressed. Repeat this process for the remaining Upright Tubes (1)
to Top Transverse Tube (3) connection points.
Step 3
4. Attach the Side Connecting Tubes (2) to the Upright Tubes (1):
Attach the Side Connecting Tubes (2) to the Upright Tubes (1) using M16x100 Hex Bolt
(12), M16 Flat Washer (11), M16 Spring Washer (10), and M16 Hex Nut (9). The order for
assembly is M16x110 Hex Bolt (8), M16 Flat Washer (11), then push the bolt through the
Side Connecting Tube (2) and Upright Tube (1), M16 Spring Washer (10), and then place
the M16 Hex Nut (9) onto the end of the hex bolt. Tighten the M16 Hex Nut (9) until the M16
Spring Washer (10) is compressed. Repeat this process for the remaining Side Connecting
Tubes (2) to Upright Tubes (1) connection points.
5. Attach the Side Connecting Plates (6) to the Upright Tubes (1):
Attach the Side Connecting Plates (6) to the Upright Tubes (1) using M16x100 Hex Bolt
(12), M16 Flat Washer (11), M16 Spring Washer (10), and M16 Hex Nut (9). The order for
assembly is M16x110 Hex Bolt (8), M16 Flat Washer (11), then push the bolt through the
Side Connecting Plate (6) and Upright Tube (1), M16 Spring Washer (10), and then place
the M16 Hex Nut (9) onto the end of the hex bolt. Tighten the M16 Hex Nut (9) until the M16
Spring Washer (10) is compressed. Repeat this process for the remaining Side Connecting
Plates (6) to Upright Tubes (1) connection points.

4
6. Attach the Side Connecting Tubes (2) and Side Connecting Plates (6) to your
Titan X-3 Power Rack:
Repeat the processes for attaching the Side Connecting Tubes (2) and Side Connecting
Plates (6) to the Upright Tubes (1) to install the Extension on your Titan X-3 Power Rack.
Step 4, 5, & 6

5
PARTS DIAGRAM
Part Number
Part Description
Quantity
1
Upright Tube
1
2
Side Connecting Tube
2
3
Top Transverse Tube
1
4
Foot Tube
2
5
Gusset Plate
4
6
Side Connecting Plate
2
7
Tube Cap
4
8
M16x110 Hex Bolt
12
9
M16 Hex Nut
24
10
M16 Spring Washer
24
11
M16 Flat Washer
24
12
M16x100 Hex Bolt
12

6
NEED HELP?
CONTACT US FIRST
1(800)-605-8241
[email protected] / www.titan.fitness
Business hours: Monday - Friday • 8am - 5pm Central