Topeak Airbooster Extreme User manual

User's Guide
AIRBOOSTER EXTREME
GB
HOW TO USE MICRO AIRBOOSTER
WARNING
Rubber Cover
Micro AirBooster Mounting Straps x 216g Topeak
Threaded CO2
Cartridge x 2
• Accepts all 16g
threaded CO2
cartridges.
• Recommended
to use Topeak
16g threaded
CO2 cartridges.
• Please read all
instructions
before first use.
• If using the Micro AirBooster inflator continuously, make sure to wait 20 seconds in between cartridges for the
rubber grommet inside the inflation head to return to its original position. Otherwise, a gas leak may occur and
prevent proper inflation.�
• Tighten the CO2cartridge before using CO2 inflation function. Failure to do so will cause improper operation and
may cause injury.
• DO NOT remove CO2 cartridge if it is still charged with gas. Completely discharge the CO2 cartridge before removal.
• When opening the CO2 cartridge, point the inflator head away from yourself and others.
• DO NOT use Micro AirBooster Inflator if any part is cracked or broken.
• DO NOT expose the CO2 cartridge to heat, or store at temperatures above 120˚F (49˚C), or store in enclosed
vehicles.
• Make sure to wear gloves when inflating to avoid injury.
• The barrel and CO2 cartridge may become extremely cold/ frosty when the CO2 gas is expelled.
• DO NOT try to unscrew the Micro AirBooster inflation head until it has warmed sufficiently to touch.
• Keep out of reach of children.
Presta Valve
Thread-in CO2cartridge.Start and regulate CO2 flow by pushing
inflation head onto valve stem.
1 2 To avoid possible personal
injury and damage to bike
and /or tool, ensure to
disengage CO2 inflator
properly after use by
unthreading inflation head
in correct direction.
NOTE
Install and thread-in inflation
head to Schrader valve.
Schrader Valve
Thread-in CO2cartridge.Start and regulate CO2 flow by pushing
inflation head onto valve stem.
1 2 3
BracketF25 Top Tube
Mounting Bracket
After each inflation, make sure
all CO
2 gas has been discharged
by pushing the Micro AirBooster
inflation head several times.
CO2Cartridge
Engagement
Inflation Head

TOP TUBE
RELEASE
INSTALL
RELEASE INSTALL
INSTALL
User's Guide
AIRBOOSTER EXTREME
MICRO AIRBOOSTER CO2CARTRIDGE RUBBER COVER
SPARE PARTS
2-year Warranty: All mechanical components against
manufacturer defects only.
Warranty Claim Requirements
To obtain warranty service, you must have your original
sales receipt. Items returned without a sales receipt will
assume that the warranty begins on the date of
manufacture. All warranties will be void if the product is
damaged due to user crash, abuse, system alteration,
modification, or used in any way not intended as
described in this manual.
* The specifications and design are subject to change
without notice.
Please contact your Topeak dealer with any questions.
For USA customer service, call: 1-800-250-3068
www.topeak.com
WARRANTY
M-TAB-EXT01-GB 03/16Copyright © Topeak, Inc. 2016
Rubber Cover
Art no. TRK-AE01
The valve head o-ring is subject to wear and may
cause air leakage over time. Periodically inspect
and replace o-ring if needed.
16g Threaded CO2cartridge
Art no. TCOT-2 (2 pcs)
TCOT-5 (5 pcs)
F25
Art no. TC1018
O-ring
Replacement Kit
Art no. TRK-HR01
MOUNTING ON SADDLE RAIL
MOUNTING ON TOP TUBE
ADDED FEATURES
Cut the strap for proper length before
installation.
Fasten bracket with mounting straps and
install AirBooster Extreme as shown.
DO NOT install AirBooster Extreme
as shown.
Mount inner tube on AirBooster Extreme.
PUSH
F25
TOP TUBE