Topeak PREPSTAND ZX User manual

2-year Warranty: All mechanical components against manufacturing defects only.
Warranty Claim Requirements
To obtain warranty service, you must have your original sales receipt. Items
returned without a sales receipt will assume that the warranty begins on the
date of manufacture. All warranties will be void if the product is damaged due
to user crash, abuse, system alteration, modification, or used in any way not
intended as described in this manual.
* The specifications and design are subject to change without notice.
Please contact your Topeak dealer with any questions.
For USA customer service call: 1-800-250-3068
www.topeak.com
WARRANTY
SETTING PREPSTAND™ ZX
Fully extend the Support Legs and lock
the Lower Quick Release Clamp Lever.
Raise the Bike Holder Arm to release it. Unfold the Bike Holder Arm
as shown.
Lower the Bike Holder Arm firmly.
NOTE:
Always fully
expand support
legs for a steady
foundation.
1
2
Adjust the height of the Bike Holder Arm to
the proper position by releasing the Upper
Quick Release Clamp Lever.
25 kg / 55 lb
MAXIMUM
WEIGHT CAPACITY
Not Compatible With Aero
Seatpost Width Larger
Than 45mm.
DO NOT use on gravel,
uneven or soft surfaces.
Check the stability of
the PREPSTAND™ ZX
periodically to ensure
secure portage of your
bike.
PREPSTAND™ZX USER'S GUIDE
GB
Optional Tool Tray
(Art no. TW016-SP01)
Lower Quick Release
Clamp Lever
Upper Quick Release
Clamp Lever
Bike Holder Arm
Support Legs
Avoid bodily harm when
folding Bike Holder Arm.
Release Support Legs by opening
the Lower Quick Release Clamp
Lever.
Lower
NOTE: Do not extend
Bike Holder Arm past
zero (0) on the scale.
Lock the Upper
Quick Release
Clamp Lever and
it's ready for use.
Raise
1
2

Open the Lower Quick Release Clamp
Lever and fold the Support Legs.
Lower the Bike Holder Arm to the lock
position to secure it.
Fold Bike Holder Arm as shown.Raise the Bike Holder Arm to the top position.
Lower the Bike Holder Arm and lock the Upper
Quick Release Clamp lever to secure it.
Secure Support Legs by locking the
Lower Quick Release Clamp Lever.
1
2
FOLDING PREPSTAND™ ZX
Copyright © Topeak, Inc. 2016 M-TW016-SP01-GB 1/16
Raise
INSTALL BIKE ON PREPSTAND™ ZX
A. Hang by saddle/seatpost. B. Hang by seat tube.
NOTE:
It's recommended to keep
front wheel on the ground for
bike adjustments and
maintenance.
WARNING
1. Always fully expand
supporting legs for a
steady foundation.
2. Before lifting bike onto
Prepstand ZX, ensure
both Upper and Lower
Quick Release Clamp
Levers are locked closed.
3. Maximum weight
capacity: 25 kg (55 lb)
4. For safety, ALWAYS
use both hands to
fold PREPSTAND™ ZX.
1
2
Open the Upper Quick Release
Clamp Lever.
Lower