Topeak FlashStand FAT User manual

GB
for 26" Mountain Bike
FlashStand FAT
User's Guide
* Maximum Weight Load: 20 kgs / 44 lbs
83˚~86˚
Adjust FlashStand FAT height to make sure your bike is within the
recommendedangleof83˚~86˚ (from horizontal plane) forstability
of your bike. Improper installation or lean angle may cause your
bike to fall and cause damage to it and/or FlashStand FAT.
IMPORTANT NOTES
80mm~ 180mm
(3.2"~7")
45mm (1.8")
60mm (2")
FlashStand FAT is designed to be used on bikes with crank-
arm width less than 45mm (1.8") at top 60mm (2") insert.
4mm
Allen Key
Support
Leg
If support legs on FlashStand FAT become loose, tighten its bolts
as shown. Do not over tighten the bolts as this may damage the
support legs.
FlashStand FAT is designed to be used on bikes with crank-
arm distance from the ground between 80mm and 180mm
(3.2"~7").
* Please read all instructions and caution notes carefully before use.

WARRANTY
for 26" Mountain Bike
FlashStand FAT
User's Guide
Topeak products are available only from professional bicycle shops. Please contact your nearest Topeak authorized bicycle dealer for any questions.
For customers in the USA, call: 1-800-250-3068
Website: www.topeak.com
2-year Warranty: All mechanical components against manufacturer defects only.
Warranty Claim Requirements
To obtain warranty service, you must have your original sales receipt. Items returned without a sales receipt will assume that the warranty begins on the date of manufacture.
All warranties will be void if the the product is damaged due to user abuse, overload, system alteration, modification, or used in any way not intended as described in this
user's guide.
Copyright © Topeak, Inc. / 2008
* The specifications and design are subject to change without notice.
M-TW007-GB 9/08
• Remove any large or heavy bicycle accessories (handlebar bag, rack bag, large saddle bag, pannier bags, etc.) that may cause any possible injury.
• Never exert force on the bike when using FlashStand FAT. Doing so may damage FlashStand FAT's support legs.
• Not recommended for use on grass, loose dirt, gravel, uneven or soft surfaces.
• Topeak FlashStand FAT is designed for supporting your bike only.
INSTALLATION
When crank-arm width is larger
than 36mm, remove the top plate
ofFlashStandFATbeforeinstalling.
Adjusting
FlashStand FAT
height
PRESS
PRESS
•FlashStandFAT is NOTrecommended
for use on downhill or freeride
mountainbikes because theirbottom
bracket height designs may be
beyond the FlashStand FAT support
limitations.
•Adjust FlashStandFAT heighttomake
sure your bike is within the
recommended angle of 83˚~ 86˚
(from horizontal plane) for stability
of your bike.
1
2
83˚~86˚
3
PRESS
36mm (1.4")
45mm (1.8")
CAUTION