Toshiba G8000MM Series User manual

UNINTERRUPTIBLE POWER SYSTEMS
G8000MM Series
IGBT
DESIGN
100 to 750 KVA UPS
94%
Efficiency
Input
PF
>0.98

State-of-the-Art Modular Design Provides Maximum Flexibility
The Toshiba G8000MM Uninterruptible Power System
utilizes state-of-the-art design and construction to
deliver industry-leading reliability and the flexibility to
meet today’s critical power demands.
• Technologically Advanced Control of Fast-Switching IGBTs Delivers
94% Efficiency
• Combination Diode Bridge and Broad Range Harmonic Input Filter
Delivers Low Input Total Harmonic Distortion (THD)
• Low THD Reduces Heat Loss in Associated Feed Equipment and
Increases Component Life
• Self-Contained Modular Design Allows Low Cost Future Expansion
• Combine up to Eight Modules for Increased Capacity or
Redundancy
• Highly Efficient Hybrid Static-Transfer Switch Built Into Each Module
• Parallel Output Tie-Cabinet Requires Minimal Intelligence Circuitry
Reducing Purchase Cost
• Superior Output Voltage Regulation Provides Non-Distorted Output
Power when Subjected to Severe Step Loads with Minimal
Utilization of Batteries
• Generator-Friendly Interface Allows 1.1 kW Generator Capacity to 1.0 KVA UPS Load
• Advanced Battery-Control Ingenuity Produces Low DC Ripple -- Extending Battery and Capacitor Life
• Fail-Safe Design Incorporates Robust, Conservatively Engineered Devices to Reduce Failures and Ensure
Reliability
High Efciency Design
• G8000MM Efficiency Greater than 90% at Loads 25% and Larger
• Higher Efficiency Means Lower Power Losses Equating to Lower
Utility Cost
• Lower Air-Conditioning Requirements
• Reduced Total Cost of Operation and Ownership
• High Efficiency Provides Rapid Return of Investment
Hybrid Static Transfer Switch
• Each UPS Module Equipped with Hybrid Static-Transfer Bypass
Switch
• In-Line Configuration and Make-Before-Break Switch Design
Ensure a Seamless Transfer of Power to Critical Load
• Redundant Switches Reduce Single Point of Failure in One Static
Switch Cabinet Design
• Hybrid SCR/Contactor Design Improves Static-Switch Efficiency
to Nearly 100%
• Lowers Utility Cost and Overall Cost of Operation
G8000MM UPS Main Features
100%
100%25% 75%
50%
G8000MM UPS with
advanced IGBTs
Typical UPS without
advanced IGBTs
0%
80%
90%
0%
EFFICIENCY
% of FULL LOAD
150 KVA G8000MM UPS
Contactor
Contactor
Static Transfer Switch

Single Module
• Built-In Hybrid Internal Static Bypass Circuit
• Output Isolation
• DC-to-DC Isolation
• Single or Dual-Source Input
• Monitor UPS Locally or Remotely
• Controllable via Local LCD Panel or Customer
Supplied Interface
Parallel Multi-Module (N+1)
• Parallel up to Eight Units
• Load Capacity from 100 to 4000 KVA
• Control Circuitry Built Into Each UPS for
Redundancy
• Distributed Bypass Eliminates Single Point of
Bypass Failure
• Controlled through Each Local UPS LCD Panel
or through Customer-Supplied Interface
• Monitor Status through UPS, Tie-Cabinet, or
Across Local Area Network
• Line Reactors in Tie-Cabinet Ensure Balanced
Load Distribution in Bypass Mode
• Tie-Cabinet Requires No Sophisticated
Control Circuitry for Ease of Future Expansion
Isolated Redundant
• Use as Backup for any UPS with Dual-Input
• Configuration Allows for 100% Load Step
Without Use of Batteries
• Requires No Parallel Tie-Cabinet for Smaller
Footprint and Lower Purchase Cost
• Feature can be Added Later to Accommodate
Expansion or Budget Limitations
• Simple, Reliable Design Significantly Increases
Reliability
G8000MM UPS System
Configurations
Battery
Cabinet
AC
Output
AC Bypass
Input
G8000MM UPS Module
AC-DC Rectier DC-AC Inverter
AC
Input
Isolation
Transformer
Contactor
DC-DC
Converter
Filter
Optional Jumper for
Single-Source Input Contactor
Contactor
Contactor
Static Transfer Switch
Battery Cabinet
G8000MM UPS
Module #1
AC
Output
G8000MM UPS
Tie Cabinet
SMB
AC Input
Source
System Maintenance Bypass
AC Input
AC Bypass
AC Input
AC Bypass
AC Input
AC Bypass
Battery Cabinet
G8000MM UPS
Module #3
Battery Cabinet
G8000MM UPS
Module #2
AC
Output
AC Input
Source
AC Input
AC Bypass
AC Input
AC Bypass
AC
Output
Battery Cabinet
G8000MM UPS
Module #2
Battery Cabinet
G8000MM UPS
Module #1

G8000MM UPS Options
Remote Monitoring
RemotEye II®offers remote real-time monitoring and analysis of
UPS operation via HTTP and SNMP.
• Multiple Monitoring Options: Locally at UPS, at Tie-Cabinet,
Remotely via Local Area Network, or Annunciator
• Each UPS Module’s Data Port may be Tied to Optional
Network Monitor
• Optional Industrial Bus ProtoNode Module Supports:
‣ SNMP
‣ TCP/IP
An optional hard-wired remote alarm sensing panel (RASP)
enables remote monitoring of UPS alarm/status points up to
1000 feet away.
‣ AB Ethernet IP
‣ BACnet
Battery Cabinet
G8000MM UPS PDU RPP
RPP
PDU RPP
RPP
Critical
Loads
Critical
Loads
AC Input
Source
Input
Bypass
Tie-Cabinet System Monitor
In multi-module systems, the G8000MM UPS tie-cabinet
has a five-inch color LCD display for monitoring unit and
system status.
Battery Cabinets and
Battery Racks
• Matching Battery Cabinets Provide Uniform
Appearance, Ease of Installation, and Simple
Connection
• Battery Cabinets Available Using Valve-Regulated
Lead Acid (VRLA)
• Battery System Available Using Flooded Batteries
• DC Breaker Disconnects Standard
Power Distribution Unit/Remote Power Panel Options
• PDUs Available in Wide Variety of Voltage
Options to Meet Specific Load Requirements
• PDUs Offered in Diverse Selection of
Distribution Options
• PDU and RPP Options Offered in Compact
Package to Maximize Floor Space
• RPPs Allow Ease of Installation for Server
Power Distribution
• RPPs Available with Monitoring Capabilities
‣ Metasys N2
‣ MSTP
‣ Modbus
‣ RTU

G8000MM UPS
Specifications
Model Number T80M3K-
10KK6XSN
T80M3K-
15KK6XSN
T80M3K-
22KK6XSN
T80M3K-
30KK6XSN
T80M3K-
37KK6XSN
T80M3K-
50KK6XSN
T80M3K-
62KK6XSN
T80M3K-
75KK6XSN
Capacity KVA/KW 100/80 150/120 225/180 300/270 375/338 500/450 625/562 750/675
Topology True On-Line, Double Conversion, IGBT PWM
Input Voltage AC Input: 480 V, Three-Phase, Three-Wire + Ground;
Bypass Input: 480 V, Three-Phase, Four-Wire + Ground
Voltage Range 480 V, +15% to -15% (408 to 552 V Without Utilizing Battery) (Optional 600 V)
Power Factor > 0.98
Current THD < 6% at 100% Load, 9% Maximum at 50% Load
Frequency 60 Hz, ± 5%
Walk-In 5 to 30 Seconds (Adjustable)
Output Voltage 480/277 V (600/346 V Optional), Three-Phase, Four-Wire + Ground
Frequency 60 Hz, ±0.05% in Free-Running Mode
Voltage Regulation ±1%
Power Factor 0.8 Nominal 0.9 Nominal
Voltage THD 2% Maximum THD at 100% Linear Load
5% Maximum THD at 100% Non-Linear load
Transient Response
±2% Maximum THD at 100% Step Load
±1% Maximum at Loss/Return of AC Power
±5% Maximum at Load Transfer to/from Static Bypass
Transient Recovery Less than 20 ms
Voltage Unbalance 1% Maximum at 100% Unbalanced Load
Phase Displacement 1º Maximum at 100% Load
Overload (Inverter) 125% for 10 Minutes; 150% for 1 Minute
Overload (System) 1000% for One Cycle
(Available with Bypass) Maximum 500% for One Cycle (Available with Bypass)
Battery Type Lead Acid (VRLA or Flooded)
Nominal Voltage 480 VDC
Minimum voltage 400 VDC
DC Ripple Voltage < 2%
Charge Current (ADC)10 15 22.5 30 37. 5 50 62.5 75
Number of Cells 240
Environment Cooling Forced Air
Temperature Range 32º to 104ºF (0º to 40 ºC) During Operating and Storage
Relative Humidity 5% to 95% Non-Condensing
Heat Rejection
(BTU/h) 19,000 28,000 43,000 59,000 74,000 89,000 112,000 134,000
Efficiency 93.5% 93.5% 93.5% 94% 94% 94% 94.5% 94.5%
Altitude 0 to 9000 ft.
Audible Noise < 64 dbA at 1 m < 75 dbA at 1 m
Dimensions Width 43.3” 47. 2 ” 55.1” 76.8” 114.2” 129.9”
Depth 29.8” 37.7 ” 49.5”
Height 79.7”
Weight 2061 lbs. 2579 lbs. 3263 lbs. 4564 lbs. 4916 lbs. 6923 lbs. 9193 lbs.
Features Dual-Input Feed, Output Isolation Transformer, RS232 and Dry Contact Interface, Modular Design for Parallel Operation
Standards UPS: UL1778, CUL, NEMA, PE1, NEC, ISO9001, ANSI C62.41 (IEEE 487)
Tie-Cabinet: NEMA PE2, UL 981, UL 1558
Warranty 1 Year on UPS Electronics Standard, Up to 5 Years Available; 3 Years on Batteries with Startup Purchase;
See Toshiba Warranty Policy for Full Details
Service 24-Hour, 365-Day Technical Support 1-877-867-8773

TOSHIBA — Quality by Design
Toshiba’s culture and history are strongly rooted in quality. Our designs are
technologically innovative, and our products are manufactured from start to end
using only the highest quality domestic and foreign parts.
Product Warranty
Toshiba offers a comprehensive warranty program on its full line of industrial
products. Consult your salesperson or the factory for specific information.
Need to Know More?
Be sure to visit our website located at www.toshiba.com/ind for the latest
information on Toshiba products and services.
Customer Support Services
Toshiba offers 24-hour service nationwide, factory witness test, load bank tests,
and site evaluation services. For UPS field service call
1-877-867-8773. For all other assistance 1-800-231-1412.
Medium Voltage Motor
G7 Drive
UPS MOTORS ADJUSTABLE SPEED DRIVES CONTROLS INSTRUMENTATION PLC
INDUSTRIAL DIVISION
13131 West Little York Road, Houston, Texas 77041
Tel [phone] Fax [phone]
US 800/231-1412 Canada 800/872-2192 Mexico 01/800/527-1204
www.toshiba.com/ind
Copyright 11/2008
Available Through:
*61260-000*
North American Headquarters and Manufacturing Facility (Houston, TX)