Totally Wicked INTU QC 200 User manual

USER MANUAL / BEDIENUNGSANLEITUNG

2
Congratulations on purchasing your
Totally Wicked INTU QC 200 Electronic Cigarette.
The Totally Wicked INTU QC 200 will provide you with an exceptional 200 Watts of
power, alongside the capability to Quick Charge the substantial 5000mAh battery,
making this device the perfect choice for vapers who require high power and/or
sustained usage. Seven modes of operation are provided; variable power (VW);
smart; variable temperature with nickel coils (Ni); variable temperature with titanium
coils (Ti); variable temperature with stainless steel coils (SS316); temperature
coefficient of resistance (TCR); and USB Charge. These adjustable modes allow
for incremental settings in terms of watts, temperature and temperature coefficient
of resistance, as well as incorporating a configurable preheat function for VT/TCR
modes. What’s more, the INTU QC 200 provides a USB charge mode, allowing
users to charge an external device such as a mobile phone or separate e-cigarette
device through an RC adaptor. The comprehensive capability of the INTU QC 200
is presented in a high quality and surprisingly compact device, which is sure to
satisfy the requirements of any e-cigarette user.

3
INTU QC 200 Battery
Power Button
OLED Screen
Up Button
Reset Button
Down Button
Micro USB Port

4
Using your INTU QC 200
Power On and Off:
The INTU QC 200 uses a 5-click on/
off function. To switch the device on,
quickly press the power button 5
times and the screen will illuminate.
When the INTU QC 200 is on, press
the button 5 times to switch the
device off.
Vaping:
Simply press the power button as
you inhale.
Charging the Battery:
Charge the INTU QC 200 via the
USB cable when connected to a
powered USB port or suitable wall
adapter. The indicator on the display
will indicate the battery status. To
utilise the Quick Charge capability,
use a compatible Qualcomm 2.0 wall
adaptor and 2.0A Micro USB cable.

5
Using your INTU QC 200
Battery Charge Indicator:
The battery charge for the internal
battery is displayed on the left-hand
side of the OLED display in all
modes, in VW mode it is displayed
on the left-hand side underneath the
atomizer resistance.
Upgrading Firmware:
To upgrade the firmware installed on
the device simply load the relevant
product page on the Totally Wicked
website, click on the link under
‘Firmware Upgrade’ and follow the
instructions provided.
Shift between VW/Smart/VT-Ni/VT-
Ti/VT-SS316/TCR(M1,M2,M3)/USB
Charge Modes:
When powered on, quickly press the
power button 3 times to activate the
menu, then use the up and down
adjustment buttons to cycle through
the VW/Smart/VT-Ni/VT-Ti/VT-SS316/
TCR(M1,M2,M3)/USB charge modes.

6
Using your INTU QC 200
VW Mode and Smart Mode:
When in VW or smart mode, use
the up or down adjustment buttons
to increase or decrease the level of
wattage respectively. The available
wattage range is 1W – 200W in
increments of 1W. Smart mode
allows for wattage settings to be
saved to the device dependant on
the atomizer resistance which is
installed, 10 profiles can be saved
at one time and if this is exceeded
the first profile will be deleted. If the
wattage is changed for a particular
resistance, this will automatically be
saved to that resistance profile.
VT Mode (Ni/Ti/SS316) and TCR
(M1,M2,M3):
When in VT/TCR mode, use the
up or down adjustment buttons
to increase or decrease the
temperature respectively. The
available temperature range is
100-315°C or 200-600°F and can be
adjusted in increments of 5°C and
10°F. To adjust the wattage level
whilst in VT mode, quickly press

7
Using your INTU QC 200
the power button 4 times to activate
wattage configuration, use the up
and down adjustment buttons to
change the wattage to the desired
level. Press the power button to
confirm the selection.
To lock the atomizer resistance,
hold the power button and the up
adjustment button simultaneously.
Repeat this to unlock the atomizer
resistance.
Note: Only lock the atomizer when
the coil is at room temperature.

8
Using your INTU QC 200
Configuring TCR Mode:
To set the temperature coefficient
of resistance to match a particular
coil, when the device is powered
off, simultaneously hold the power
button and the up adjustment button
to enter the configuration menu.
Use the power button to select
which to configure from M1, M2 and
M3 – this feature allows the TCR
values for 3 materials to be stored
to the device. Once M1, M2, or M3
has been selected, use the up and
down adjustment buttons to increase
or decrease the value to your
preference, long press the power
button or leave the device for 10
seconds to confirm the selection.

9
Using your INTU QC 200
Material TCR Value Range
Nickel 600 - 700
NiFe 300 - 400
Titanium 300 - 400
SS (303, 304, 316, 317) 80 - 200
Note: The TCR value displayed is 105 (100,000) times greater than the actual
TCR value and is for INTU QC 200 usage only.

10
Using your INTU QC 200
Configure Preheat Settings (VT/
TCR Modes):
Preheat settings are configurable
in terms of power (Watts) and
time (seconds). When the device
is powered off, hold the power
button and up adjustment button
simultaneously to activate the
configuration menu. Use the
power button to cycle through
the menu until ‘Time’ or ‘Power’
is selected, then use the up and
down adjustment buttons to set the
desired value. Leave the device for
10 seconds or long press the power
button to confirm the selection.
USB Charge Mode:
To turn USB mode on/off, when
the device is powered off, hold the
power button and the up adjustment
button to activate the configuration
menu. Use the power button to
cycle through the options and select
‘USB’, when selected use the up or
down adjustment buttons to select
between the on/off states. Leave
the device for 10 seconds or long