Toto EGO TX108LEBR User manual

SPECIFICATIONS
OPERATING CONDITIONS
S06771BR
MAINTENANCE
TROUBLESHOOTINGINSTALLATION
"EGO" SINGLE LEVER LAVATORY FAUCET
W/ 1 ¼" POP-UP WASTE
21. AERATOR
3. BOLT
1
Bolt
3
Bolt
Pop-Up Clip
Setting Bolt
Packing
Nut
Washer
Body
Pivot Rod
Plug
Siphon
Packing
Triangle
Packing
Packing
Nut
Kick Box
CHECK
POINT
Flow rate unsatisfactory 1 Remove and clean
Water leaks around the handle 2 Tighten
Handle is loose 3 Tighten
Plug cannot open and close 4 Tighten
PROBLEM
SOLUTION
4. BOLT
2. CONNECTING
NUT
All Finishes : Clean the finish with mild soap and warm water.
Wipe entire surface completely dry with clean soft cloth. Many
cleaners may contain chemicals, such as ammonia, chlorine,
toilet cleaner etc. which could adversely affect the finish and
are not recommended for cleaning
210
340
Ø50
Max.30
71
294
183
G½231~300
38~5146
G1¼
ATTENTION
Washer
OPEN
Position
Bottom
Position
Hex. Key
Additional Rod
Bolt
R3
To Cold Water
Supply
To Hot
Water Supply
1. Water supply pressure : 0.05 ~ 0.75MPa.
2. Ensure that water supply is clean ( No Sand, Dirt, Etc.).
1.Don t use abrasive cleaners or solvents on faucets and fittings.
As the product model is constantly updated, the actual product
may not look the same as it shown in the diagram, but the
basic installation principles are the same.
2.
TX108LEBR
Ø35Hole

SPESIFIKASI
KONDISI OPERASIONAL
S06771BR
PEMELIHARAAN
PENYELESAIAN MASALAHPEMASANGAN
"EGO" SINGLE LEVER LAVATORY FAUCET
W/ 1 ¼" POP-UP WASTE
21. AERATOR
3. BOLT
1
Bolt
3
Bolt
Pop-Up Clip
Setting Bolt
Packing
Nut
Washer
Body
Pivot Rod
Plug
Siphon
Packing
Triangle
Packing
Packing
Nut
Kick Box
Laju aliran tidak memuaskan 1 Lepas dan bersihkan
Air bocor disekitar handle 2 Kencangkan
Handle longgar 3 Kencangkan
Plug tidak bisa membuka dan menutup 4 Kencangkan
MASALAH
SOLUSI
POIN
PERIKSA
4. BOLT
2. CONNECTING
NUT
Seluruh lapisan : Bersihkan lapisan akhir dengan sabun lembut
dan air hangat. Lap seluruh permukaan hingga benar-benar
kering dengan kain lembut yang bersih. Kebanyakan bahan
pembersih mungkin mengandung bahan kimia, seperti amonia,
klorin, pembersih toilet, dll. yang dapat mempengaruhi hasil
akhir dan tidak disarankan untuk membersihkannya.
210
340
Ø50
Max.30
71
294
183
G½231~300
38~5146
G1¼
PERHATIAN
Washer
OPEN
Position
Bottom
Position
Hex. Key
Additional Rod
Bolt
R3
To Cold Water
Supply
To Hot
Water Supply
1. Tekanan sumber air: 0.05 ~ 0.75 MPa.
2. Pastikan kondisi sumber air adalah bersih (tidak ada pasir,
kotoran dan lain lain)
TX108LEBR
Ø35Hole
1.Jangan gunakan pembersih atau pelarut abrasif pada faucet
dan fitting.
Karena model produk terus mengalami pembaharuan, aktual
produk mungkin tidak sama dengan gambar, tapi prinsip
dasar pemasangan adalah sama.
2.