Toto GLORIA TX103LG User manual

S06521Z
SPECIFICATIONS TROUBLESHOOTING
INSTALLATION
TX103LG
1.
3.
Lock Nut
Joint
Setting Nut
2.
3 X Ø35
4.
6.
Faucet
Packing
Packing
Lock Nut
Body
Ceramic
Head Work
Handle Set *
Connecting
Nut
3
Bottom
Position
OPEN
Position
Bolt
Bolt
Pop-up Clip
CHECK
POINT
Water leaks around the handle 1 Tighten
Plug cannot open and close 2 Tighten
PROBLEM
SOLUTION
2. BOLT
Packing
Packing
Packing
100100
Ø60
Ø60
max. 230
46
38~51
Ø60
46
120
G½
G1¼
15°
Flexible
Hose
5. Plug
Siphon
Packing
Triangle
Packing Pivot
Rod
Packing
Nut
Kick Box
Washer
1. CERAMIC
HEAD WORK
Ø35 Hole
"GLORIA" 8" LEVER HANDLE LAVATORY FAUCET
W/ 1¼" POP-UP WASTE
R4
OPERATING CONDITIONS
MAINTENANCE
All Finishes : Clean the finish with mild soap and warm water.
Wipe entire surface completely dry with clean soft cloth. Many
cleaners may contain chemicals, such as ammonia, chlorine,
toilet cleaner etc. which could adversely affect the finish and
are not recommended for cleaning
ATTENTION
1. Water supply pressure : 0.05 ~ 0.75MPa.
2. Ensure that water supply is clean ( No Sand, Dirt, Etc.).
1.Don t use abrasive cleaners or solvents on faucets and
fittings.
As the product model is constantly updated, the actual
product may not look the same as it shown in the diagram,
but the basic installation principles are the same.
2.
To Hot
Water
Supply
To Cold
Water
Supply
* The red handle for left position and
the blue handle forright position.
**Tighten the handle base by hand
Handle
Base **
Ø35
Hole
Slip
Washer

S06521Z
SPESIFIKASI PENYELESAIAN MASALAH
PEMASANGAN
TX103LG
1.
3.
Lock Nut
Joint
Setting Nut
2.
3 X Ø35
4.
6.
Faucet
Packing
Packing
Lock Nut
Body
Ceramic
Head Work
Handle Set *
Connecting
Nut
3
Bottom
Position
OPEN
Position
Bolt
Bolt
Pop-up Clip
Air bocor disekitar handle 1 Kencangkan
Plug tidak bisa membuka dan menutup 2 Kencangkan
MASALAH
SOLUSI
POIN
PERIKSA
2. BOLT
Packing
Packing
Packing
100100
Ø60
Ø60
max. 230
46
38~51
Ø60
46
120
G½
G1¼
15°
Flexible
Hose
5. Plug
Siphon
Packing
Triangle
Packing Pivot
Rod
Packing
Nut
Kick Box
Washer
1. CERAMIC
HEAD WORK
Ø35 Hole
"GLORIA" 8" LEVER HANDLE LAVATORY FAUCET
W/ 1¼" POP-UP WASTE
R4
To Hot
Water
Supply
To Cold
Water
Supply
Handle
Base **
Ø35
Hole
Slip
Washer
KONDISI OPERASIONAL
PEMELIHARAAN
Seluruh lapisan : Bersihkan lapisan akhir dengan sabun
lembut dan air hangat. Lap seluruh permukaan hingga
benar-benar kering dengan kain lembut yang bersih.
Kebanyakan bahan pembersih mungkin mengandung
bahan kimia, seperti amonia, klorin, pembersih toilet, dll.
yang dapat mempengaruhi hasil akhir dan tidak
disarankan untuk membersihkannya.
PERHATIAN
1. Tekanan sumber air: 0.05 ~ 0.75 MPa.
2. Pastikan kondisi sumber air adalah bersih (tidak ada pasir,
kotoran dan lain lain)
1.Jangan gunakan pembersih atau pelarut abrasif pada faucet
dan fitting.
Karena model produk terus mengalami pembaharuan, aktual
produk mungkin tidak sama dengan gambar, tapi prinsip
dasar pemasangan adalah sama.
2.
* Handle warna merah di posisi sebela h kiri
dan handle warna biru di posisi sebelah kana n.
** Kencangkan handle base dengan tangan.