Touchstone 90011 User manual

Encase Fireplace Mantel
Model # : 90011, 90012, 90021, 90022
INSTALLATION MANUAL
WARNING
Read and understand this entire installation manual, including all safety
information, before mounting the mantel on the wall. Failure to do so could
cause the mantel to not be secured to the wall properly.
CAUTION
Keep this installation manual for future reference. If you sell or give this
product away, make sure this manual accompanies this product.

Encase Fireplace Mantel
www.touchstonehomeproducts.com
800.215.1990
Update: 20201007
2
Table of Contents
Unpacking Your Encase Fireplace Mantel............................................................................................................... 3
Parts and Hardware ................................................................................................................................................. 3
Tools Required...................................................................................................................................................... 3
What’s Included in the Box .................................................................................................................................. 3
Installation................................................................................................................................................................... 4
Choosing Installation Location................................................................................................................................. 4
Installing Mounting Blocks....................................................................................................................................... 4
Mounting The Encase Fireplace Mantel................................................................................................................... 6
Warranty ..................................................................................................................................................................... 8
IMPORTANT SAFETY INFORMATION
WARNING!
•Make sure to use the appropriate tools listed in this manual for installing your Encase Fireplace Mantel.
•The maximum weight limit for the Encase Fireplace Mantel is 50lbs. Do not exceed the maximum weight
listed.
•Wear proper protective gear when installing your Encase Fireplace Mantel.
•Follow good construction practices when installing your Encase Fireplace Mantel.
•Thoroughly read through the installation instructions to familiarize yourself with the process before
beginning installation.
•Before installation acclimate the mantel to the room for at least 24 hours.

Encase Fireplace Mantel
www.touchstonehomeproducts.com
800.215.1990
Update: 20201007
3
Unpacking Your Encase Fireplace Mantel
Parts and Hardware
Tools Required
•Power Drill and Drill Bits
•Stud Finder
.
What’s Included in the Box
Mantel - 1
Mounting Blocks - 2
Mantel Touch-up Paint –1
2 ½” Screws For Wall Mounting - 4
2” Screws For Securing
Mantel to Mounting Blocks –4
**NOTE: Longer screws may need to be used for securing the mounting blocks to your wall depending on
the surface of your wall.

Encase Fireplace Mantel
www.touchstonehomeproducts.com
800.215.1990
Update: 20201007
4
Installation
Choosing Installation Location
•If mounting above a Touchstone Home Products Electric Fireplace, measure wall location so that location
for mounting the Encase Fireplace Mantel meets the recommended clearances.
•Minimum clearances (measurements taken from front of glass panel):
Touchstone Wall Mounted Fireplace: 24”from top of fireplace to bottom of mantel
Touchstone Recessed Fireplace: 12”from top of fireplace to bottom of mantel
Installing Mounting Blocks
Instructions:
1. Using a stud finder, locate 2 framing studs on the wall which you intend to mount the mantel.

Encase Fireplace Mantel
www.touchstonehomeproducts.com
800.215.1990
Update: 20201007
5
Installing Mounting Blocks –cont.
2. Once you have located 2 studs, mount the 2 mounting blocks on the wall using 2 2 ½” screws provided per each
mounting block.
**NOTE: Longer screws may need to be used for securing the mounting blocks to your wall depending on the
surface of your wall.

Encase Fireplace Mantel
www.touchstonehomeproducts.com
800.215.1990
Update: 20201007
6
Mounting The Encase Fireplace Mantel
1. After the mounting blocks are securely mounted on the wall, center the mantel over the mounting blocks.

Encase Fireplace Mantel
www.touchstonehomeproducts.com
800.215.1990
Update: 20201007
7
Mounting The Encase Fireplace Mantel –cont.
2. Once the mantel is centered over the mounting blocks, use 4 2”screws provided to secure the mantel to each
mounting block.
3. Once secured, your mantel is now ready for use.
NOTE: The maximum weight that the mantel can support is 50lbs.

Encase Fireplace Mantel
www.touchstonehomeproducts.com
800.215.1990
Update: 20201007
8
Warranty
Touchstone Home Products®, Inc warrants our Encase Fireplace Mantel to be free of defects in material and
workmanship for one year from date of purchase. Touchstone will replace any Encase Fireplace Mantel that is
deemed defective or becomes defective during normal use within one year after the date of purchase.
Touchstone Home Products®, Inc does not warrant its products against damage caused by third parties.
Touchstone Home Products®, Inc does not cover damages caused by misuse, alterations, accident, lack of
maintenance, abuse or neglect.
The warranty does not cover paint scratches, cosmetic blemishes, dents, corrosion, or other normal wear and tear
associated with the fireplace. Damage to the Encase Fireplace Mantel due to water, weather damage, long periods
of dampness, condensation, damaging chemicals or cleaners are not covered under warranty.
Touchstone Home Products® will not be responsible for installation, labor, or any other expenses related to the
reinstallation of a warranted part, and such expenses are not covered under warranty.
Extended warranty coverage for the fireplace is available by contacting Touchstone Home Products® directly at 1-
800-215-1990.