Toyota PZQ7089J15 User manual

PARTS IN MAIN CARTON
PARTS IN FITTING KIT
Security Screen
Welded Assembly
Qty - 1 Fitting Kit
Qty - 1
M6
Washer
Qty - 5
Fitting
Instruction
Qty - 1
Fitting
Instruction
Page 1 of 4Accessory Part No. PZQ7089J15 / PZQ7089J17ISSUE 1: 20/08/15
CP0144
PARTS, SERVICE & ACCESSORIES
RECOMMENDED TOOL LIST - (Not Supplied in Kit)
PARTS CHECK SHEET
Place these instructions in vehicle’s glove box after installation is complete
Accessory Part No. PZQ7089J15 / PZQ7089J17 Installation Time: Approx. 30min
Toyota HiLux 2015
Security Mesh - Side Window,
J-Deck Canopy
Installation Instructions
IMPORTANT! • Read instructions carefully before installation.
• It is strongly recommended that installation is conducted by an authorized dealer.
• This product must be installed exactly as specified in these instructions.
Failure to do so may result in improper fit and/or retention.
Mounting Bracket
CLIP70022
Qty - 5
Self Tapping Screw
SCRW0811
Qty - 10
M6x35
Hex Head
Flange Bolt
Qty - 5
• Drill and 10mm Socket Drive Drill Attachment (for Self Tapping Screw)
• Spanner 10mm

Page 2 of 4ISSUE 1: 20/08/15 Accessory Part No. PZQ7089J15 / PZQ7089J17
Toyota Hilux Security Mesh - Side Window
Installation Steps Flow Chart
START
STEP 1
FIT MOUNTING BRACKETS TO
WINDOW FRAME
STEP 2
STEP 3
INSTALL SCREEN TO MOUNTING
BRAKETS & ADJUST MOUNTING
BRACKETS POSITION
REMOVE SCREEN
STEP 4
SECURE
MOUNTING BRACKETS
STEP 5
RE-FIT SCREEN & TORQUE FASTENERS

Inside the canopy, locate the 10 pre-drilled holes in side window frame for security grille mounting brakets.
WASHER
M6 BOLT
FIG. 1
FIG. 2
FIG. 3
Fit 5 mounting brakets to the window frame using the 10 Self Tapping screws. Do not fully tighten screws at
this stage, leave loose enough for fine adjustment of the mounting brackets.
Fit security grille to the mounting brakets. Secure with 5xM6x35 bolts and flat washers, adjusting mounting
brackets positions as you go to achieve screw alignment.
Accessory Part No. PZQ7089J15 / PZQ7089J17 Page 3 of 4ISSUE 1: 20/08/15
CP0144
Hilux
Security Mesh - Side Window, J-Deck
Accessory Part No. PZQ7089J15 / PZQ7089J17
10mm
RH WINDOW AND SECURITY MESH SHOWN. LH IS MIRRORED.
SECURE MOUNTING BRAKETS
WITH SELF TAPPING SCREWS

FIG. 4
FIG. 5
Remove grille, with mounting brackets now in final position, fully tighten the 10 Self Tapping screws.
Re-install security grille, M6 bolts and flat washers. torque bolts to 9Nm.
Page 4 of 4ISSUE 1: 20/08/15
CP0144
Hilux
Security Mesh - Side Window, J-Deck
Accessory Part No. PZQ7089J15 / PZQ7089J17
Accessory Part No. PZQ7089J15 / PZQ7089J17
10mm
10mm
9Nm