TP-Link TD-8810 V5 Quick start guide

How to upgrade TP-LINK ADSL Modem Router
(Broadcom Solution
Notice:
• Please verify the hardware version of your device for the firmware ver
sion.Wrong firmware upgrading may damage your device and void the
warranty.
• After you downloaded the firmware from TP-LIN website, please use
decompression software such as WinZIP or WinRAR to extract the
firmware file to a folder;
• Do NOT upgrade the firmware via wireless connection;
• Do NOT turn off the power or cut down the Ethernet cable during
upgrade process;
• Please write down all current settings as a backup and enter them
manually after upgrading.
• Internet Explorer(IE) is recommended to upgrade the firmware.
Step 1 Log into the ADSL Modem Router by typing http://192.168.1.1 in the address
bar of the web browser (such as Internet Explorer, Firefox). The User Name
and Password are both admin unless you have changed it before.

Step 2 Click Management ->Update Software, click the Browse button to choose
the firmware you already extracted in the folder.
Step 3 Click the Update Firmware button. The device will reboot automatically after
the upgrading has been finished. Please wait about 3 minutes.
Step 4 Click Device Info->Summary, verify that the router’s firmware has been
upgraded.
Step 5 It is recommended that restoring the device to factory default to make the new
functions take effect; Click Management->Settings->Restore Default, Click Restore
Default Settings Button.
Step 6 After restoring factory default, please login http://192.168.1.1 and re-enter the
settings you have written down before upgrading.