TP-Link tapo C125 User manual

User Guide
AI Home Security Wi-Fi Camera
©2023 TP-Link 1910013496 REV1.0.0

1
About This Guide
This guide provides a brief introduction to the AI Home Security Wi-Fi Camera and the Tapo app, as well as regulatory information.
Please note that features available in Tapo may vary by model and software version. Tapo availability may also vary by region. All images, steps, and
descriptions in this guide are only examples and may not reect your actual Tapo Camera experience.
Conventions
In this guide, the following convention is used:
Convention Description
Blue Key information appears in blue, including management page text such as menus, items, buttons and so on.
Underline Hyperlinks are in blue and underlined. You can click to redirect to a website.
Note: Ignoring this type of note might result in a malfunction or damage to the device.
More Info
• Specications can be found on the product page at https://www.tapo.com.
• Our Technical Support and troubleshooting information can be found at https://www.tapo.com/support/.

2
Introduction
When you are away home, there are always something you care about. This is where the smart camera functions. No matter your child is climbing the
kitchen cabinet, or the pet is stealing snacks, the AI Home Security Wi-Fi Camera helps you stay with them anytime, anywhere. Receive a notication
whenever your camera detects motion and see a video clip of this motion to check everything.
• Smart AI Detection and Notication – Smart AI identies people, pets, and vehicles while also recognizing abnormal sounds, notifying users as
needed.
• 2K QHD* + AI Image Enhancement + HDR – Utilizing AI image enhancement technology, experience superior clarity even in low light or overexposed
settings.
*Compatible with Alexa and Google Assistant supported displays. User experience is dependent on the connected device’s specications.
• Physical Privacy Shutter – When enabled, maintain your privacy with the lens blocked by the privacy shutter.
• Two-Way Audio – Enables communication through a built-in microphone and speaker.
• Discreet Night Vision with 940nm IR LED – Enjoy unobtrusive night-time monitoring of your baby or pet with the barely-noticeable, low-intensity
940nm IR LED.
• Local* and Cloud** Storage Supported – Save recorded videos on the microSD card* (up to 512 GB) or by using Tapo Care cloud storage services.
*microSD card needs to be purchased separately. Actual storage capacity depends on the size of the microSD card used.
*Subscribe for cloud storage at https://www.tapo.com/tapocare/
• Customizable Alarm & Siren – Trigger the recorded audio as an alarm when motion is detected.
• Ultra-Wide 140° Field of View – Capture more views with an ultra-wide eld of view.
• Magnetic Mounting – Eortlessly set up your Tapo C125 using its versatile magnetic base.
• Activity Zones – Noties you when activity is detected in specic zones.

3
Appearance
1
2
3
4
5
6
7
1
When Privacy Mode is on, the lens cap shuts to block the camera
lens. Do not manually push the lens cap up to prevent scratches.
Back
Front
Microphone 4Lens
5Lens Cap
Speaker
6
7DC Power Connector2System LED
3IR LEDs
Side
microSD Card Slot
Adjust View
Privacy / Reset Button
Insert a microSD card (not included) and initialize it on the Tapo
app for local recording.
Tilt and rotate the camera and stand for your desired viewing angle.
• Press once: Turn on/o Privacy Mode after setup.
• Press for 5s: Reset Wi-Fi settings only.
• Press for 10s: Reset to factory default settings.
microSD

4
System LED Indication
Blinking red and blue
Blinking blue quickly
Blinking red slowly
Solid blue
Blinking red quickly
Solid red
Ready for setup
Connecting to Wi-Fi
Connected to Wi-Fi
Connected to the cloud
Camera updating or
camera resetting
Starting up,
video recording or
live streaming

5
Before You Start
Position your camera’s adjustable stand for setup.
If the camera lens is hidden, do not manually push the lens cap up to prevent scratches.
Note: After setup, you can press the Privacy/Reset button once to turn o Privacy Mode and the camera lens will appear.
Physical Privacy
Shutter/ Reset

6
Set Up Your Camera
Follow the steps below to get started with your new camera.
Step 1. Download Tapo App
Get the Tapo app from the App Store or
Google Play, or by scanning the QR code
below.
Step 2. Log In
Open the app, and log in with your TP-Link ID.
If you don't have an account, create one rst.
Step 3. Add Your Camera
Tap the button in the app and search for
your model. Follow the app instructions to
complete setup.
OR

7
Set Up Using Amazon Frustration-Free Setup
What is Amazon Frustration-Free Setup?
Amazon Frustration-Free Setup can help connect and set up Tapo smart devices in fewer steps, without having to remember and re-enter your Wi-Fi
password on each device.
To use this feature, conrm the following:
● The new Tapo device supports Amazon FFS.
● The new Tapo device is purchased from Amazon.
● You have an Amazon FFS enabled Alexa device or router.
● You have saved your Wi-Fi information to Amazon by using Alexa echo.
● Your Tapo device and router are on the same network as your Alexa echo.
LED Indications during Amazon Frustration-Free Setup
LED Status
Blinking red and blue Ready for setup
Blinking blue FFS setup in progress
Solid blue Working properly
If the LED does not turn solid blue after a long time, you can try to add the Tapo device manually. (Press the Reset button on your Tapo device once.
Then open the Tapo app, tap the + button on the page, select your device model, and follow the app instructions. )

8
1. Open the Amazon Alexa app. Then tap More and select Skills &
Games.
How to use Amazon Frustration-Free Setup with Tapo devices
2. Enter Tapo in the search bar and choose Tapo.

9
3. Tap the ENABLE TO USE button. 4. Log in with your TP-Link ID that has bound to your Tapo device, and tap Authorize. After authorized
successfully, the message Tapo has been successfully linked will come up.

10
5. Plug in your Tapo device and the setup will complete automatically in two minutes.
For setting up more Tapo devices, just plug in and enjoy!
Done!
If this device displays on the Home page in the Tapo app, it indicates this device has been successfully associated with your Amazon account and
joined your Wi-Fi network automatically.
If this device does not display on the Home page in the Tapo app, try setting it up manually. (Tap the + button on the page, select your device model,
and then follow the app instructions.)

11
Set Up HomeKit
This is a HomeKit-enabled device. You can set up and easily control your Tapo devices with HomeKit from your iPhone or iPad.
Before You Start:
1. Your iPhone/iPad should be connected to a stable 2.4 GHz Wi-Fi network with internet access.
2. Ensure your iPhone/iPad and Apple home hub (if any) are connected to the same Wi-Fi network.
3. To control this HomeKit-enabled device, the latest iOS or iPadOS version is recommended.
4. HomeKit will be disabled 10 minutes after the Tapo device is powered on. You can power o your Tapo device, then power it on and try again.
Set Up HomeKit
Option 1: Set Up in the Home App
1. Find the QR code as below on your Tapo device or in its packaging.
2. Open the Home app and add the accessory by scanning the HomeKit
QR code or entering the provided numeric setup code.
3. Follow the instructions in the Home app to complete setup.
Option 2: Set Up in the Tapo App
1. Open the Tapo app. If you have set up the device, go to Device
Settings > Add to Home.
2. Find the QR code as below on your Tapo device or in its packaging.
3. Follow the instructions in the Tapo app to complete setup.
To control a Tapo device in the Home app, we must follow Apple guidelines. As a
result, some Tapo app features will be disabled.
To know about the disabled features in the Home app, refer to
https://www.tp-link.com/support/faq/3653/ or scan the QR code on the right.

12
Failed to Set Up HomeKit?
• Move your iPhone/iPad and the Tapo device closer to the router to get a stronger Wi-Fi signal.
• Factory reset the Tapo device and restart your phone. Then try again.
• Refer to the FAQ below for detailed instructions: https://www.tp-link.com/support/faq/3390/

13
Install Your Camera
When you nish adding your camera in the Tapo app, you can set it on a table or shelf. You can also mount it using its versatile magnetic base. Follow
the steps below to install your new camera.
Option 1: Set on a table or shelf Option 2: Mount to metallic surfaces
The camera has a magnet in its base, allowing
magnetic attachment to metallic surfaces.
1. Place the camera on your desired table or shelf.
2. Adjust the stand angle to the notch position in
the base for more stability.
Metallic Surface

14
Option 3: Stick to a clean wall
1. Attach the included adhesive to the back of the
metal plate properly.
2. Wipe o the dust from the surface, stick the metal
plate with the adhesive to the clean wall, and press
it down for 15 seconds to ensure the plate is rmly
attached. Then attach the camera to the plate.
Note: This is applicable with tile, glass, marble, metal,
stainless steel, and hard wall surfaces.
3M
3M
3M Adhesive
Note: The adhesive is for one-time use. Avoid re-using
the adhesive to ensure its adhesion.
1. Stick the mounting template to the desired mounting place. Drill
two holes according to the template.
2. Insert two anchors into the holes and use the screws to ax the
metal plate over the anchors. Then attach the camera to the plate.
Option 4. Mount to the wall
6 mm (15/64 in.)
3±0.1
3 0±0.5
Ø6
+0
-0.5
3.6 REF
90°
+2°
-0°
0.8
+0.15
-0
Depth of Phillips: 0.91~1.43mm
2Max