TP-Link TL-SG1016PE User manual

User Guide
Gigabit Easy Smart Switch
TL-SG1016DE/TL-SG1024DE/TL-SG1016PE
TL-SG105E/TL-SG108E/TL-SG108PE
REV3.1.0
1910011971

COPYRIGHT & TRADEMARKS
Specifications are subject to change without notice. is a registered trademark of
TP-Link Technologies Co., Ltd. Other brands and product names are trademarks or registered
trademarks of their respective holders.
No part of the specifications may be reproduced in any form or by any means or used to make
any derivative such as translation, transformation, or adaptation without permission from
TP-Link Technologies Co., Ltd. Copyright © 2016 TP-Link Technologies Co., Ltd. All rights
reserved.
http://www.tp-link.com
FCC STATEMENT (For TL-SG105E/TL-SG108E/TL-SG108PE only)
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
•Consult the dealer or an experienced radio/ TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:
1) This device may not cause harmful interference.
2) This device must accept any interference received, including interference that may cause
undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
I

FCC STATEMENT (For TL-SG1016DE/TL-SG1024DE/TL-SG1016PE only)
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely
to cause harmful interference in which case the user will be required to correct the interference
at his own expense.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:
1) This device may not cause harmful interference.
2) This device must accept any interference received, including interference that may cause
undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
CE Mark Warning (For TL-SG105E/TL-SG108E/TL-SG108PE only)
This is a class B product. In a domestic environment, this product may cause radio interference,
in which case the user may be required to take adequate measures.
CE Mark Warning (For TL-SG1016DE/TL-SG1024DE/TL-SG1016PE only)
This is a class A product. In a domestic environment, this product may cause radio interference,
in which case the user may be required to take adequate measures.
Industry Canada Statement (For TL-SG105E/TL-SG108E/TL-SG108PE only)
CAN ICES-3 (B)/NMB-3(B)
Industry Canada Statement (For TL-SG1016DE/TL-SG1024DE/TL-SG1016PE
only)
CAN ICES-3 (A)/NMB-3(A)
II

BSMI Notice
安全諮詢及注意事項
請使用原裝電源供應器或只能按照本產品注明的電源類型使用本產品。
清潔本產品之前請先拔掉電源線。請勿使用液體、噴霧清潔劑或濕布進行清潔。
注意防潮，請勿將水或其他液體潑灑到本產品上。
插槽與開口供通風使用，以確保本產品的操作可靠並防止過熱，請勿堵塞或覆蓋開口。
請勿將本產品置放於靠近熱源的地方。除非有正常的通風，否則不可放在密閉位置中。
請不要私自打開機殼，不要嘗試自行維修本產品，請由授權的專業人士進行此項工作。
此為甲類資訊技術設備，于居住環境中使用時，可能會造成射頻擾動，在此種情況下，使用者會被
要求採取某些適當的對策。(For TL-SG1016DE/TL-SG1024DETL-SG1016PE only)
Продукт сертифіковано згідно с правилами системи УкрСЕПРО на відповідність вимогам
нормативних документів та вимогам, що передбачені чинними законодавчими актами
України.
Safety Information
When product has power button, the power button is one of the way to shut off the product;
When there is no power button, the onl yway to completely shut off power is to disconnect the
product or the power adapter from the power source.
Don’t disassemble the product, or make repairs yourself. You run the risk of electric shock and
voiding the limited warranty. If you need service, please contact us.
Avoid water and wet locations.
Explanation of the symbols on the product label
Symbol Explanation
DC voltage
AC voltage
Indoor use only
III

RECYCLING
This product bears the selective sorting symbol for Waste electrical and electronic
equipment (WEEE). This means that this product must be handled pursuant to
European directive 2012/19/EU in order to be recycled or dismantled to minimize
its impact on the environment.
User has the choice to give his product to a competent recycling organization or to
the retailer when he buys a new electrical or electronic equipment.
IV

CONTENTS
Package Contents .........................................................................................................................1
Chapter 1 About this Guide ..........................................................................................................2
1.1 Intended Readers.........................................................................................................2
1.2 Conventions.................................................................................................................2
1.3 Overview of This Guide ................................................................................................3
Chapter 2 Introduction .................................................................................................................5
2.1 Overview of the Switch ................................................................................................5
2.2 Appearance Description..............................................................................................5
2.2.1 Front Panel ........................................................................................................5
2.2.2 Rear Panel .........................................................................................................9
Chapter 3 Login to the Switch.................................................................................................... 11
3.1 Login .......................................................................................................................... 11
3.2 Configuration .............................................................................................................12
Chapter 4 System.......................................................................................................................13
4.1 System Info ................................................................................................................13
4.2 IP Setting....................................................................................................................13
4.3 User Account .............................................................................................................14
4.4 System Tools .............................................................................................................15
4.4.1 Backup and Restore ........................................................................................15
4.4.2 System Reboot................................................................................................17
4.4.3 System Reset ..................................................................................................17
4.4.4 Firmware Upgrade...........................................................................................18
Chapter 5 Switching ...................................................................................................................20
5.1 Port Setting ................................................................................................................20
5.2 IGMP Snooping ..........................................................................................................21
5.3 LAG.............................................................................................................................22
Chapter 6 Monitoring .................................................................................................................24
6.1 Port Statistics.............................................................................................................24
6.2 Port Mirror..................................................................................................................25
6.3 Cable Test ..................................................................................................................26
6.4 Loop Prevention.........................................................................................................27
Chapter 7 VLAN..........................................................................................................................28
7.1 MTU VLAN..................................................................................................................29
7.2 Port Based VLAN........................................................................................................30

7.3 802.1Q VLAN .............................................................................................................31
7.4 802.1Q PVID Setting ..................................................................................................32
Chapter 8 QoS............................................................................................................................34
8.1 QoS Basic...................................................................................................................36
8.2 Bandwidth Control .....................................................................................................38
8.3 Storm Control ............................................................................................................38
Chapter 9 PoE ............................................................................................................................40
9.1 PoE Config .................................................................................................................41
Appendix A: Specifications..........................................................................................................43

Package Contents
The following items should be found in your box:
One Gigabit Easy Smart Switch
One power cord
Two mounting brackets and other fittings (for TL-SG1016DE/TL-SG1024DE/
TL-SG1016PE only)
Installation Guide
Resource CD for TL-SG105E/TL-SG108E/TL-SG108PE/TL-SG1016DE/TL-SG1024DE/
TL-SG1016PE switch, including:
•This User Guide
•Easy Smart Configuration Utility.exe
•Easy Smart Configuration Utility User Guide
•Other Helpful Information
Note:
Make sure that the package contains the above items. If any of the listed items are damaged or
missing, please contact your distributor.
1

Chapter 1 About this Guide
This User Guide contains information for setup and management of TL-SG105E/TL-SG108E/
TL-SG108PE/TL-SG1016DE/TL-SG1024DE/TL-SG1016PE Gigabit Easy Smart Switch. Please
read this guide carefully before operation.
1.1 Intended Readers
This Guide is intended for network managers familiar with IT concepts and network
terminologies.
1.2 Conventions
When using this guide, please notice that features of the switch may vary slightly depending on
the model and software version you have, and on your location, language, and Internet service
provider. All screenshots, images, parameters and descriptions documented in this guide are
used for demonstration only.
The information in this document is subject to change without notice. Every effort has been
made in the preparation of this document to ensure accuracy of the contents, but all
statements, information, and recommendations in this document do not constitute the
warranty of any kind, express or implied. Users must take full responsibility for their application
of any products.
In this Guide the following conventions are used:
The switch or TL-SG105E/TL-SG108E/TL-SG108PE/TL-SG1016DE/TL-SG1024DE/
TL-SG1016PE mentioned in this Guide stands for TL-SG105E/TL-SG108E/TL-SG108PE/
TL-SG1016DE/TL-SG1024DE/TL-SG1016PE Gigabit Easy Smart Switch without any
explanation.
Menu Name→Submenu Name→Tab page indicates the menu structure. System→System
Info→System Summary means the System Summary page under the System Info menu
option that is located under the System menu.
Bold font indicates a button, a toolbar icon, menu or menu item.
Symbols in this Guide：
Symbol
Description
Note:
Ignoring this type of note might result in a malfunction or damage to the device.
Tips:
This format indicates important information that helps you
make better use of
your device.
2

More Info:
The latest software, management app and utility can be found at Download Center at
http://www.tp-link.com/support.
The Installation Guide (IG) can be found where you find this guide or inside the package of
the switch.
Specifications can be found on the product page at http://www.tp-link.com.
A Technical Support Forum is provided for you to discuss our products at
http://forum.tp-link.com .
Our Technical Support contact information can be found at the Contact Technical Support
page at
http://www.tp-link.com/support .
1.3 Overview of This Guide
Chapter
Introduction
Chapter 1 About This
Guide
Introduces the guide structure and conventions.
Chapter 2 Introduction
Introduces the features, application and appearance of
TL-SG105E/TL-SG108E/TL-SG108PE/TL-SG1016DE/
TL-SG1024DE/TL-SG1016PE switch.
Chapter 3 Login to the
Switch
Introduces how to log on to the Web management page.
Chapter 4 System This module is used to configure system properties of the
switch. Here mainly introduces:
System Info: View device information and define the device
description.

IP Setting: Get and modify the network parameters of the
switch.
User Account: Modify the username and password for users
to log on to the Web management page.

System Tools: Manage the configuration file of the switch.
Chapter 5 Switching
Configure the basic functions of the switch.
Chapter 6 Monitoring Monitor the traffic information of the switch, and provide the
convenient method to locate and solve the network problem.
Chapter 7 VLAN This module is used to configure VLANs to control broadcast in
LANs. Here mainly introduces:
MTU VLAN: Set the MTU VLAN mode.
Port Based VLAN: Set the Port-Based VLAN mode
802.1Q VLAN: Set the 802.1Q Tag VLAN mode.

802.1Q PVID Setting: Configure 802.1Q PVID value.
3

Chapter
Introduction
Chapter 8 QoS
This module is used to configure QoS function to provide
different quality of service for various network applications and
requirements. Here mainly introduces:
QoS Basic: Configure and view the basic parameters of QoS.
Bandwidth Control:
Configure and view the bandwidth
control function information.
Storm Control: Configure and view the storm control function
information.
Chapter 9 PoE This module is used to configure the PoE function for the switch to
supply power for PD devices.
Appendix A Specifications
Lists the hardware specifications of the switch.
Return to CONTENTS
4

Chapter 2 Introduction
Thanks for choosing the TL-SG105E/TL-SG108E/TL-SG108PE/TL-SG1016DE/TL-SG1024DE/
TL-SG1016PE Gigabit Easy Smart Switch!
2.1 Overview of the Switch
The TL-SG105E/TL-SG108E/TL-SG108PE/TL-SG1016DE/TL-SG1024DE/TL-SG1016PE Gigabit
Easy Smart Switch
is an ideal upgrade from an unmanaged switch, designed for Small and
Medium Business networks that require simple network management. Network administrators
can effectively monitor traffic via Port Mirroring, Loop Prevention and Cable Test features. To
optimize traffic on your business network, they offer port-based, tag-based, DSCP-based QoS
to keep latency-sensitive traffic moving smoothly and jitter-free. Additionally, port-based,
tag-based and MTU VLAN can improve security and meet more network segmentation
requirements. Moreover, with the innovative energy-efficient technology, they are eco-friendly
solution for your business network.
Note:
For details about Easy Smart Configuration Utility, please refer to the User Guide of the Easy
Smart Configuration Utility in the Resource CD.
2.2 Appearance Description
2.2.1 Front Panel
TL-SG105E/TL-SG108E
The front panel of TL-SG105E is shown as Figure 2-1.
Figure 2-1 Front Panel of TL-SG105E
The front panel of TL-SG108E is shown as Figure 2-2.
Figure 2-2 Front Panel of TL-SG108E
The following parts are located on the front panel of the switch:
Reset: With the switch powered on, press this button for five seconds or above to reset the
software setting back to factory default setting. (For TL-SG108E only)
5

1000Mbps Ports: Designed to connect to the device with a bandwidth of 10Mbps, 100Mbps
or 1000Mbps. Each has a corresponding 1000Mbps LED and 10/100Mbps LED.
LEDs
Name
Status
Indication
Power
On
Power is on.
Flashing
Power supply is abnormal.
Off
Power is off or power supply is abnormal.
1000Mbps
On
A 1000Mbps device is connected to the corresponding port.
Flashing
Data is being transmitted or received.
Off
A 10/100Mbps device or no device is connected to the
corresponding port.
10/100Mbps
On
A 10/100Mbps device is connected to the corresponding port.
Flashing
Data is being transmitted or received.
Off
No device is connected to the corresponding port.
TL-SG108PE
The front panel of TL-SG108PE is shown as Figure 2-3.
Figure 2-3 Front Panel of TL-SG108PE
The following parts are located on the front panel of the switch:
Reset: With the switch powered on, press this button for five seconds or above to reset the
software setting back to factory default setting.
1000Mbps Ports: Designed to connect to the device with a bandwidth of 10Mbps, 100Mbps
or 1000Mbps. Each has a corresponding Link/Act LED (Left LED). For Port 1– 4, each of
them also has a PoE Status LED (Right LED).
LEDs
Name
Status
Indication
Power
On
Power is on.
Flashing
Power supply is abnormal.
Off
Power is off or power supply is abnormal.
PoE Max
On
46W≤The total power supply< 55W.
Flashing
The total power supply≥ 55W.
Off
The total power supply< 46W.
6

Link/Act
On(Green)
A 1000Mbps device is connected to the corresponding port.
On(Yellow)
A 10/100Mbps device is connected to the corresponding
port.
Flashing
Data is being transmitted or received.
Off
No device is connected to the corresponding port.
PoE Status
On
The port is supplying power normally.
Flashing
The port is supplying power abnormally.
Off
No PoE power supply is provided on the port.
TL-SG1016DE/TL-SG1024DE
The front panel of TL-SG1016DE is shown as Figure 2-4.
Figure 2-4 Front Panel of TL-SG1016DE
The front panel of TL-SG1024DE is shown as Figure 2-5.
Figure 2-5 Front Panel of TL-SG1024DE
The following parts are located on the front panel of the switch:
Reset: With the switch powered on, press this button for five seconds or above to reset the
software setting back to factory default setting.
1000Mbps Ports: Designed to connect to the device with a bandwidth of 10Mbps, 100Mbps
or 1000Mbps. Each has a corresponding 1000Mbps LED and Link/Act LED.
LEDs
Name
Status
Indication
Power
On
Power is on.
Flashing
Power supply is abnormal.
Off
Power is off or power supply is abnormal.
1000Mbps
On
A 1000Mbps device is connected to the corresponding port.
7

Off
A 10/100Mbps device or no device is connected to the
corresponding port.
Link/Act
On
A device is connected to the corresponding port but no
activity.
Flashing
Data is being transmitted or received.
Off
No device is connected to the corresponding port.
TL_SG1016PE
The front panel of TL-SG1016PE is shown as Figure 2-6.
Figure 2-6 Front Panel of TL-SG1016PE
The following parts are located on the front panel of the switch:
Reset: With the switch powered on, press this button for five seconds or above to reset the
software setting back to factory default setting.
1000Mbps Ports: Designed to connect to the device with a bandwidth of 10Mbps, 100Mbps
or 1000Mbps. Each has a corresponding Speed LED. For Port 1– 8, each of them also has a
PoE Status LED.
LEDs
Name
Status
Indication
PWR
On
Power is on.
Flashing
Power supply is abnormal.
Off
Power is off or power supply is abnormal.
Speed
On
Green
The corresponding port is running at 1000Mbps.
Yellow
The corresponding port is running at 10/100Mbps.
Flashing
The corresponding port is transmitting or receiving data.
Off
There is no device linked to the corresponding port.
PoE Status
On
The port is connecting and supplying power to a PD.
Flashing The PoE power circuit may be in short, the power current
may be overloaded or non-standard PD is connected.
Off No PD is connected to the corresponding port, or no
power is supplied according to the power limits of the port.
8

PoE Max
On
The power of all the connected PoE ports is between
103W and 110W. No power may be supplied if additional
PDs are connected.
Flashing
The power of all the connected PoE ports is ≥110W.
Off
The power of all the connected PoE ports is <103W.
FAN
Green
The fan works properly.
Yellow
The fan doesn't work properly.
2.2.2 Rear Panel
TL-SG105E/TL-SG108E/TL-SG108PE
The rear panel of TL-SG105E/TL-SG108E/TL-SG108PE features a power socket and a
Kensington Security Slot (marked with ). TL-SG105E also has a Reset button located on the
rear panel.
Figure 2-7 Rear Panel of TL-SG105E
Figure 2-8 Rear Panel of TL-SG108E
Figure 2-9 Rear Panel of TL-SG108PE
Reset: With the switch powered on, press this button for five seconds or above to reset the
software setting back to factory default setting. (For TL-SG105E only)
Kensington Security Slot: Secure the lock (not provided) into the security slot to prevent
the device from being stolen.
DC Power Socket: Connect the female connector of the power cord here, and the male
connector to the DC power outlet. Please make sure the voltage of the power supply meets
the requirement of the input voltage.
9

TL-SG1016DE/TL-SG1024DE/TL-SG1016PE
The rear panel of TL-SG1016DE/TL-SG1024DE/TL-SG1016PE features a power socket and a
Grounding Terminal (marked with ). TL-SG1016PE also has a Kensington Security Slot
(marked with ) located on the rear panel.
Figure 2-10 Rear Panel of TL-SG1016DE
Figure 2-11 Rear Panel of TL-SG1024DE
Figure 2-12 Rear Panel of TL-SG1016PE
Grounding Terminal: TL-SG105E/TL-SG108E/TL-SG108PE/TL-SG1016DE/TL-SG1024DE/
TL-SG1016PE already comes with Lightning Protection Mechanism. You can also ground
the switch through the PE (Protecting Earth) cable of AC cord or with Ground Cable.
AC Power Socket: Connect the female connector of the power cord here, and the male
connector to the AC power outlet. Please make sure the voltage of the power supply meets
the requirement of the input voltage.
Kensington Security Slot: Secure the lock (not provided) into the security slot to prevent
the device from being stolen.
Return to CONTENTS
10

Chapter 3 Login to the Switch
3.1 Login
1) To access the configuration utility, open a web-browser and type the default address
http://192.168.0.1 in the address field of the browser, then press the Enter key.
Figure 3-1 Web-browser
Tips:
To log in to the switch, the IP address of your PC should be set in the same subnet addresses
of the switch. The IP address is 192.168.0.x ("x" is any number from 2 to 254), Subnet Mask is
255.255.255.0.
2) After a moment, a login window will appear, as shown in Figure 3-2. Enter admin for the User
Name and Password, both in lower case letters. Then click the Login button or press the
Enter key.
Figure 3-2 Login
11

3.2 Configuration
After a successful login, the main page will appear as Figure 3-3, and you can configure the
function by clicking the setup menu on the left side of the screen.
Figure 3-3 Main Setup-Menu
Note:
Clicking Apply can only make the new configurations effective before the switch is rebooted. If
you want to keep the configurations effective even the switch is rebooted, please click Save
Config. You are suggested to click Save Config before cutting off the power or rebooting the
switch to avoid losing the new configurations.
Return to CONTENTS
12

Chapter 4 System
The System module is mainly for basic settings of the switch, including four submenus: System
Info,IP Setting, User Account and System Tools.
4.1 System Info
On this page you can view the system information and define the device description.
Choose the menu System→System Info to load the following page.
Figure 4-1 System Info
The following entries are displayed on this screen:

System Info
Device Description:
Displays the device model number.
MAC Address:
Displays the MAC address of the switch.
IP Address: Displays the system IP a
ddress of the switch. The default
system IP is 192.168.0.1 and you can change it appropriate to
your needs.
Subnet Mask:
Displays the subnet mask of the switch.
Default Gateway:
Displays the default gateway of the switch.
Firmware Version:
Displays the installed software version number.
Hardware Version:
Displays the installed device hardware version number.
Device Description:
Give a description to the device for identification.
4.2 IP Setting
Each device in the network possesses a unique IP Address. You can log on to the Web
management page to operate the switch using this IP Address.
13