TP-Link UH720 User manual

If you have any questions related to this product,
please contact our technical support:
http://www.tp-link.com/en/support/contact/
Contact Us
www.tp-link.com
For more information, please refer to:
www.tp-link.com
♦ Keep this device away from water, fire, humidity or hot environments.
♦
♦
♦
Do not heavily drop or impact this device.
♦Do not attempt to disassemble, modify or fix this device by yourself. You run the risk of electric
shock and voiding the limited warranty. If you need service, please contact us.
♦Cut off the power supply before cleaning the device. Do not use liquid cleaning method.
♦
♦
Use the power cord and power adapter provided with your device.
For best performance, the connected devices should not exceed a combined current of 8A for
UH720 (5A for UH700).
♦TP-LINK will not be held responsible for any damage to disk or hard disk data caused by
improper use.
Attention
COPYRIGHT & TRADEMARKS
Specifications are subject to change without notice. TP-LINK is a registered trademark of
TP-LINK TECHNOLOGIES CO., LTD. Other brands and product names are registered
trademarks of their respective holders.
No part of the specifications may be reproduced in any form or by any means or used to
make any derivative such as translation, transformation, or adaptation without permission
from TP-LINK TECHNOLOGIES CO., LTD. Copyright © 2014 TP-LINK TECHNOLOGIES CO.,
LTD. All rights reserved.
http://www.tp-link.com
FCC & CE
FCC STATEMENT
CE Mark Warning
This is a class B product. In a domestic environment, this product may cause radio
interference, in which case the user may be required to take adequate measures.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:
1) This device may not cause harmful interference.
2) This device must accept any interference received, including cause undesired
operation.
Any changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
7106504810 REV1.0.0
User Guide
USB 3.0 Hub
Model No. UH720/UH700

Connect the devices as follows.
Charging (For UH720 only)
Additional USB Ports
Mobile Hard DiskUSB Flash DiskSmartphone
1
2
Usage Tips:
Hardware Connection
Using the Hub
Usage Tips:
Usage Tips:
Smartphone Pad
USB Mouse
Press the power button and the power LED will light up, indicating that the
hub is ready to use.
This hub provides your computer with 7 additional USB 3.0 ports for super-speed
USB 3.0 connections.
This hub provides two charging ports with a maximum current of 2.4A to quickly
charge all kinds of mobile devices such as Android, Apple and Windows products.
1. The USB 3.0 ports are also compatible with USB 2.0 and USB 1.1 specifications.
2. The USB 3.0 ports transfer data at a rate up to 5Gbps, but the actual rate is limited
by the USB transfer rate of the connected devices.
3. The performance of 2.4GHz wireless devices (wireless keyboards, mice, etc.) may
be affected when they are working too close to USB 3.0 devices.
1. If your device’s current is less than 2.4A, the charging port can automatically adjust
its current supplied to your device to avoid damage.
2. The charging ports are for charging your mobile devices only with no data transfer.
The TP-LINK USB 3.0 hub is plug-and-play and requires no driver for Windows, Mac
OS X or Linux systems.