Trailer Valet MV PRO User manual

OPERATING MANUAL
MV PRO
Rev.8.10.23

Carefully read and understand instructions before connecting your new MV Pro.
Failure to follow these guidelines may result in serious injury to persons and
property for which Trailer Valet will not be held liable. Do not allow persons to
operate or assemble this unit until they have read this manual and have developed
a thorough understanding of how the unit works.
WARNING AND TABLE OF CONTENTS.........................................................................................................................2
IMPORTANT SAFETY INFORMATION..............................................................................................................................3
SPECIFICATIONS..................................................................................................................................................4
WHAT’S IN THE BOX..................................................................................................................................................................5
ASSEMBLY...................................................................................................................................................................6
OPERATING INSTRUCTIONS.................................................................................................................................................8
MAINTENANCE...............................................................................................................................................10
LIMITED MANUFACTURER’S WARRANTY...............................................................................................................11
2
OPERATING MANUAL
TABLE OF CONTENTS
WARNING

3
IMPORTANT SAFETY INFORMATION
Failure to heed these warnings may result in personal injury and/or property damage:
1. DO NOT use the MV Pro on slopes and inclines beyond stated limits.
2. DO NOT attempt to use the MV Pro to pull up (nose rst) or to push down (rear rst) an
incline. Always move along an incline with the unit on the lower end of the incline.
3. DO NOT submerge the MV Pro in water (salt or fresh) or leave it in water for prolonged
periods, since this can damage the gears and erode lubricants.
4. DO NOT use your drill on the MV Pro’s high gear.
5. Carefully read all instructions. The operator of the MV Pro must exercise common sense,
caution, and full judgment when assessing situations not covered or cautioned in this
manual.
6. The MV Pro is designed for specic applications only. Trailer Valet will not be responsible
for issues arising from modications made to the device. Do not modify the device or
use the device for any application other than its intended purpose. Do not exceed the
designated weight limits.
7. Stay alert! Do not operate if you are tired. Do not operate the device while under the
inuence of drugs or alcohol. Read prescription warning labels to determine if the use of
prescription drugs may impair your ability to operate the device.
8. As with all devices with moving parts, do not wear excessively loose clothing as it may
become caught, resulting in injury. Tie back and secure long hair.
9. Have a second person guide your trailer’s movements while using the MV Pro to avoid
property damage when necessary, especially in narrow or poorly visible areas.
10. Operators and bystanders should never place any part of their body under or in the path
of any portion of this product or the load being supported or moved.
11. This product must be installed and used in strict accordance with these instructions.
12. Always remember to set the brakes before leaving or if you are having trouble maintaining
control of the trailer.
13. Always read and understand your drill/driver operator’s manual and instructions.
14. Before each use of the MV Pro, check for damaged parts. Carefully inspect the device
for any part that appears to be damaged to determine if the device will operate properly.
Check for alignment and secure mounting of all moving parts. If the device is neither
aligned, secured, or both: DO NOT use the device.
15. When servicing, use only factory replacement parts.
16. Have wheel blocks in place before/after use and ready in case of emergency.
17. Never exceed the maximum rated capacity. Refer to the operating manual or decals on
the product to obtain rated capacity. If uncertain, contact Customer Support at (844)
846-9344 or email: [e-mail].
18. The MV Pro is designed for vertical loading. Excessive side forces may cause failure and
must be avoided.
19. The use of gloves is recommended while attaching the device to the trailer.
20. The MV Pro is designed for use on solid surfaces. DO NOT use the product on excessively
soft surfaces or muddy terrain as the device will not be able to gain traction. If there is no
traction, despite being on a solid surface, consider shifting more of the weight of your
trailer forward.
SAVE THESE INSTRUCTIONS

SPECIFICATIONS
4
The Trailer Valet is made of high strength steel and given a powder coat nish to resist corrosion
from the elements and marine use. When cared for properly, it will provide years of service. The
Trailer Valet mounts to the coupler of the trailer tongue with the aid of our specially designed Ball
Attachment. Once attached to your trailer, the Trailer Valet makes maneuvering your trailer much
easier. Hitching, unhitching, and moving is now performed with precision. The Trailer Valet MV
Pro is designed for trailers up to 14,000 lbs. It is intended is for use only on paved surfaces or
compact gravel and soils that are free of debris.
Wheel size: 9.0 inches
Tongue max weight: 1,400 lbs.
Trailer max weight: 14,000 lbs.
Weight: 50 lbs.
Maximum dimensions: 29.6” H x 27.4” L x 8.4” W
Phone: [phone]
Email: [e-mail]
Website: www.trailervalet.com
THANK YOU FOR YOUR PURCHASE!
Congratulations on your purchase of the Trailer Valet MV Pro. For your future reference,
please complete the owner’s record below:
Purchase Date: ______________________ Order No.:______________________
Retailer:_____________________________
Be sure to keep your receipt, owner’s manual, and warranty information in a safe place.

WHAT’S IN THE BOX
5
Upon removing items from packaging, it is very important to thoroughly inspect all parts of
the system. Any part that is missing or damaged must be immediately replaced before using
the device.
Contact Trailer Valet Customer Service at 1-844-846-9344 or [e-mail]
1. Steering/Brake Handle
2. Brake Cap
3. Drill Adapter Driveshaft
4. Brake Handle Clip
5. Side Plates
6. High Gear Driveshaft
7. Gear Covers
8. Axle Yoke Compartment
9. Axle Screw Assembly
10. Rims and Tires
11. Tire Axle
12. Gear Chains
13. Easy-Grip Handle
14. Rotating Coupler
15. Magnetic Tool Holder
16. Right-Angle Gearbox
17. Low Gear Driveshaft
The Trailer Valet MV Pro
Hitch Ball
Hand Crank
Ball Base
Manual
Rotation Pin
Coupling Plate
Spanner Wrench
Drill Attachment

INSTALLATION ON TO COUPLER
6
STEP 1: Check trailer height and ensure
installation is on a at, solid surface.
STEP 4: Using your trailer jack, lower the hitch
towards the unit’s rotating coupler and attach
rotation pin to secure in place.
STEP 2: Set up hitch ball and ball base.
Optional: For 2-5/16”
couplers, attach ball
converter to hitch ball.
STEP 5: Make sure the MV Pro is securely tightened and not rocking.
STEP 3: Attach hitch ball w/ ball base to
coupler and tighten - Don’t forget your
spanner wrench, and tighten that base!
LOCKED

7
INSTALLATION ONTO JACK
STEP 1A (JX2-S): Check trailer height and
ensure installation is on a at, solid surface.
STEP 2B (JX5-S): Connect Side Jack via
pipe mount to the bracket and insert stow
pin. Lock with security bolt located in the
back of the bracket.
STEP 1B (JX5-S): Check trailer height and
ensure installation is on a at, solid surface.
Install mounting bracket into trailer frame.
STEP 3: Lower the hitch towards the unit’s rotating coupler and attach rotation pin to secure.
STEP 2A (JX2-S): Install Side Jack onto
trailer frame via mounting bracket.

OPERATING INSTRUCTIONS
8
TESTING THE ASSEMBLY
Always ensure the operator and bystanders are aware of load stability.
1) Lower the trailer gradually until the existing jack is above the ground and the trailer is
completely supported by the MV Pro.
NOTE: Keeping the trailer jack close to the ground prevents serious damages from occurring
due to unexpected failures.
ATTACHING DRIVER
Option 1: Manual Operation with the Hand Crank.
1) Attach the Hand Crank to the Low or High Gear Driveshaft.
Option 2: Using the Drill Adapter.
1) Using the chuck of your drill/driver, connect to the Drill Adapter.
2) Secure the chuck of your drill around the Drill Adapter tightly to avoid the Adapter
slipping o the drill.
3) Align and insert the Drill Adapter to the Low Gear Driveshaft.
NOTE: If you are using a drill, be sure your battery pack is fully charged before use. Follow your
drill/driver manufacturer’s recommendation.
DO NOT use your drill on the high gear.
DO NOT use impact drills.
Knowing the proper techniques to operate your MV Pro can help keep you and others around
you safe. In this guide, you are shown the basic fundamentals for eective operation. However,
it is up to you to analyze the situation and make the decisions necessary for the proper use
of your MV Pro. Apply your knowledge of your MV Pro and the basic fundamentals you have
practiced to adjust your techniques to each unique situation. Safety is key, and always be
mindful of what you are doing as improper use can cause harm.

9
OPERATING INSTRUCTIONS
OPERATING THE DEVICE
NOTE: If your trailer has built-in brakes, they must be disengaged prior to operation of the MV
Pro. Consult your trailer manufacturer’s manual/instructions on temporary brake release. If this is
not available to you, please contact Trailer Valet Customer Support through phone or email for
assistance.
1) When you’re getting ready to operate the device, make sure you have one hand rmly gripped
on the brake, and the other hand rmly gripped on the drill/driver.
2) Slowly lift the Steering Handle until the brake is disengaged, and begin cranking. The Steering
Handle must be held up rmly at all times when moving the trailer.
NOTE: Hold the drill/driver rmly when engaging. The drill will have high initial torque if the drill
trigger is pulled rather than squeezed. Begin to move the trailer as slowly as you are capable and
carefully increase the power up to an appropriate speed when using the Drill Attachment.
NOTE: It is important that you steer the device only when you are cranking and the trailer is
moving. Attempting to turn the Steering/Brake Handle at a dead stop will place excessive stress
on a single tire.
NOTE: When attempting to make sharp turns (e.g.. 90° rotation) from a stationary position, crank
the MV Pro back and forth while turning until the unit is in the desired position. Then, proceed to
make the turn.
DO NOT use the MV Pro on slopes and inclines exceeding a strict maximum of 10
degrees on a paved/concrete surface. This rating is subject to factors including, but not limited
to, alternate surfaces, weight distribution, change in weight capacity, and use on multi-axle
trailers. DO NOT pull up or push down an incline. The unit must always be on the lower end of any
incline. If you have any questions concerning the use of your MV Pro on a slope or incline, please
contact us at [phone] or email us at: [e-mail]
NOTE: Use of power drill is inadvisable for movement upon any incline.

MAINTENANCE
10
CHECK BEFORE
FIRST USE
BEFORE
EACH USE
EVERY 90
DAYS
Take the time to read and understand these
operating instructions in order to understand your
MV Pro and its operations.
Read and understand your drill/driver operator’s
manual and instructions.
Inspect the MV Pro for damage. Replace any
damaged parts immediately. If a part must be
replaced, contact Trailer Valet Customer Service
844-846-9344.
If you plan to keep the device attached to the trailer
after each use, you must check the Locking Nut to
ensure it stays fastened tightly against the trailer
tongue and the nut is at against the coupler.
Keep the device free from contaminants. Remove
any dirt and debris from moving parts.
Apply multipurpose grease to the chain by removing
the front cover of the device.
Apply multipurpose grease to the gear bushings.
Additional Tips:
• The Trailer Valet MV Pro is made of high strength steel and given a powder coat nish made
to resist corrosion. However, if the device is used in a marine environment or where road salt
is encountered, rinse o the interior and exterior with fresh water and allow to dry. DO NOT
SUBMERGE THE MV PRO as this can damage the gears and erode lubricants.
• After each use, wipe exterior surfaces with a clean cloth.

11
LIMITED MANUFACTURER’S WARRANTY
SuperTech S Corp warrants for one year from the purchase date that the product will be in
working condition and will be free from manufacturing defects, provided that installation and
use of the product are in accordance with product instructions. This warranty is only applicable
to the original consumer purchaser and is non-transferable.
ALL OTHER WARRANTIES IMPLIED OR EXPRESSED ARE HEREBY DISCLAIMED.
THIS WARRANTY DOES NOT COVER:
1. Normal wear and tear or normal aging of the product;
2. Consumable parts designed to diminish over time, unless failure occurred due to a
manufacturing defect;
3. Cosmetic damage, including but not limited to, scratches and dents;
4. Damage through accident, abuse, neglect, misuse, natural events, or other external causes;
5. Damage through misapplication, overloading, or improper installation;
6. Damage due to improper maintenance and repair; and/or
7. Product alterations.
LIMITATION OF LIABILITY:
EXCEPT AS PROVIDED IN THIS WARRANTY AND TO THE MAXIMUM EXTENT PERMITTED BY
LAW, SUPERTECH IS NOT RESPONSIBLE FOR ANY DIRECT, INCIDENTAL, CONSEQUENTIAL
DAMAGES, OR INJURIES RESULTING FROM ANY BREACH OF WARRANTY OR CONDITION;
INCLUDING, BUT NOT LIMITED TO, LOSS OF USE, LOSS OF REVENUE, LOSS OF ACTUAL OR
ANTICIPATED PROFITS, LOSS OF BUSINESS, LOSS OF OPPORTUNITY, LOSS OF GOOD WILL,
LOSS OF REPUTATION, OR ANY DIRECT, INDIRECT, OR CONSEQUENTIAL LOSS OR DAMAGE
WHATSOEVER CAUSED, INCLUDING THE REPLACEMENT OF EQUIPMENT AND PROPERTY.
CUSTOMER RESPONSIBILITIES:
Customers may be required to provide proof of purchase date, respond to questions designed
to assist with diagnosing potential issues, and follow Trailer Valet’s directions to make a claim
on your warranty.
TO MAKE A WARRANTY CLAIM:
Contact us either through:
PHONE: [phone]
EMAIL: [e-mail]
WEBSITE: www.trailervalet.com
TRAILER VALET SHALL HAVE THE EXCLUSIVE RIGHT TO DETERMINE IF A UNIT IS
COVERED UNDER ITS LIMITED MANUFACTURER’S WARRANTY.
SEVERABILITY:
The invalidity, illegality, or unenforceability of any provision of this warranty shall not render the
other provisions invalid, illegal, or unenforceable.
GOVERNING LAW AND JURISDICTION
This warranty shall be governed by the laws of the State of California. The courts of California
shall have the exclusive right to adjudicate any disputes arising under or in connection to this
warranty.

SUPERTECH S. CORP.
Customer Service: [phone]
Email: [e-mail]
WWW.TRAILERVALET.COM
Copyright 2023 by Supertech S. Corporation. All rights reserved. No portion of
this manual or any artwork contained herein may be reproduced in any shape or
form without the express written consent of Supertech S. Corporation.
For further information or if you have any questions, please contact:
Rev.8.10.23