Trailer Valet JX7-S User manual

OPERATING MANUAL
JX7-S
Rev 9.28.23

Carefully read and understand all the instructions before connecting your new Trailer
Valet Drill Jack.
Failure to follow these guidelines may result in serious injury to persons and property
for which Trailer Valet will not be held liable. Do not allow persons to operate or
assemble this unit until they have read this manual and have developed a thorough
understanding of how the unit works.
WARNING AND TABLE OF CONTENTS.........................................................................................................................2
IMPORTANT SAFETY INFORMATION..............................................................................................................................3
SPECIFICATIONS..................................................................................................................................................4
ASSEMBLY...................................................................................................................................................................5
OPERATING INSTRUCTIONS.................................................................................................................................................6
LIMITED MANUFACTURER’S WARRANTY....................................................................................................................7
2
OPERATING MANUAL
TABLE OF CONTENTS
WARNING
thank you for your purchase!
Congratulations on your purchase of the Trailer Valet JX7-S. For your future reference, please
complete the owner’s record below:
Purchase Date: ______________________ Order No.:______________________
Retailer:_____________________________
Be sure to keep your receipt, owner’s manual, and warranty information in a safe place.

3
IMPORTANT SAFETY INFORMATION
Failure to heed these warnings may result in personal injury and/or property damage:
1. DO NOT leave your trailer free standing without the use of wheel chocks.
2. DO NOT submerge the jack in water (salt or fresh) or leave it in water for prolonged
periods, since this can damage the gears and erode lubricants.
3. Carefully read all instructions. The operator of the jack must exercise common sense,
caution, and full judgment when assessing situations not covered or cautioned in this
manual.
4. The Trailer Valet JX is designed for specic applications only. Trailer Valet will not be
responsible for issues arising from modications made onto the device. Do not modify
the device or use the device for any application other than its intended purpose. Do not
exceed the designated weight limits.
5. As with all devices with moving parts, do not wear excessively loose clothing as it may
become caught, resulting in injury. Tie back and secure long hair.
6. This product must be installed and used in strict accordance with these instructions.
7. Always read and understand your drill/driver operator’s manual and instructions.
8. Before each use of the Trailer Valet JX, check for damaged parts. Carefully inspect the
device for any part that appears to be damaged to determine if the device will operate
properly. Check for alignment and secure mounting of all moving parts. If the device is
neither aligned, secured, or both: DO NOT use the device.
9. When servicing, use only factory replacement parts.
10. Have wheel chocks in place before/after use and ready in case of emergency.
11. Never exceed the maximum rated capacity. Refer to the specications section of this
operating manual or decals on the product to obtain rated capacity. If uncertain, contact
Customer Support at [phone] or email: [e-mail].
12. The Trailer Valet JX is designed for vertical loading. Excessive side forces may cause
failure and must be avoided.
13. The use of gloves is recommended while attaching the device to the trailer.
SAVE THESE INSTRUCTIONS
Phone: [phone]
Email: [e-mail]
Website: www.trailervalet.com

Specifications
4
The Trailer Valet JX Series is a line of manual hand-crank trailer jacks that have the versatility
to be powered using any standard 20-24V drill and a Trailer Valet Drill Attachment. Designed
for consumers to make hitching and adjusting quick and easy in comparison to standard
hand-crank jacks, the new JX 7K jack comes with a 7,000 lbs static capacity and a larger side
mount bracket. Each unit comes with a detachable hand crank, drill attachment, mount bracket
hardware, and a drop leg footplate.
Static Capacity: 8,000 lbs
Dynamic Capacity (with Crank Handle): 7,000 lbs
Dynamic Capacity (with Drill): 6,000 lbs
Gear Ratio: 3:4
Mount Type: Fixed Bracket
Jack Extension: 26.6 inches (13.6 inches screw travel, 13.0 inches drop leg extension)
Weight: 25.9 lbs
Upon removing items from packaging, it is very important to thoroughly inspect all parts of
the system. Any part that is missing or damaged must be immediately replaced before using
the device.
Contact Trailer Valet Customer Service at 1-844-846-9344 or [e-mail]
Bracket Bolts (4X)
Drill AttachmentBracket Clamps (2X)
Crank Handle
1. Drill Drive Shaft
2. Outer Tube
3. Weather Sleeve
4. Foot Plate
5. Inner Tube
6. Clevis Pin
7. Mounting Bracket
8. Grease Fitting
9. Gear Cover
The Trailer Valet JX7-S
Includes:
1
2
3
4
5
6
7
8
9

Assembly
STEP 1: In order to ease installation, extend the jack so that the mounting bracket is at the
desired mount height with the frame. The drop leg can also be lowered to gain additional
extension of the jack.
STEP 2: Secure with the included two Bracket Clamps and the four bolts, nuts and washers.
NOTE Have the bottom Bracket Bolts resting directly underneath the tongue of the trailer to
help insure the bracket doesn’t shift/tilt while jacking up the trailer.
WARNING The Mount Bracket is only to be installed on trailer frames that are rectangular in
prole. Cylindrical frames are not compatible with the Mount Bracket.
Prior to install, raise the trailer tongue until you have adequate space to attach the jack. The
unit must be attached while the weight of the trailer is supported by an existing support or tow
vehicle. Having wheel chocks in place during connection will ensure a safe install.
5

operating instructions
6
OPTION 1: MANUAL OPERATION
STEP 1: Attach the Crank Handle to the driveshaft located at the top of the unit. Turning the
handle clockwise will extend the jack. Turning the handle counter-clockwise will retract the jack.
STEP 2: Lower the drop leg as needed for additional extension of the jack.
OPTION 2: DRILL OPERATION WITH THE DRILL ADAPTER
STEP 1: The Drill Adapter can be used with any standard 20 to
24 volt, ½ inch chuck, consumer drill. Corded drills and impact
drills are not recommended.
STEP 2: Slot the Drill Adapter into your drill chuck and secure
tightly to avoid the adapter slipping.
STEP 3: When using an electric drill, it will have high initial torque if the drill trigger is pulled rather
than squeezed. For proper use, hold the drill rmly and begin to squeeze the trigger slowly,
increasing the power up to an appropriate speed.
NOTE: When using a power drill, be sure your battery pack is fully charged before use. Follow
your drill manufacturer’s recommendations and instructions.
STORING THE DEVICE (IF APPLICABLE)
After use, lower your jack until your trailer frame sits level and remove the drill adapter/crank handle.
MAINTENANCE
The recommended lubrication schedule for the JX is to grease the components through the
grease tting every 90 days. After adding the grease, extend and retract the jack several times to
distribute the grease evenly over the components.
3.41”
13.7”13.6”
Jack Leg
Extension
Drop Leg
Extension
Full
Extension
27.3”

7
LIMITED MANUFACTURER’S WARRANTY
SuperTech S Corp warrants for one year from the purchase date that the product will be in
working condition and will be free from manufacturing defects, provided that installation and
use of the product is in accordance with product instructions. This warranty is only made to the
original consumer purchaser and is non-transferable.
ALL OTHER WARRANTIES IMPLIED OR EXPRESSED ARE HEREBY DISCLAIMED.
THIS WARRANTY DOES NOT COVER:
1. Normal wear and tear or normal aging of the product;
2. Consumable parts designed to diminish over time, unless failure occurred due to a
manufacturing defect;
3. Cosmetic damage, including but not limited to scratches and dents;
4. Damage through accident, abuse, neglect, misuse, natural events, or other external causes;
5. Damage through misapplication, overloading, or improper installation;
6. Damage due to improper maintenance and repair; and/or
7. Product alterations.
LIMITATION OF LIABILITY:
EXCEPT AS PROVIDED IN THIS WARRANTY AND TO THE MAXIMUM EXTENT PERMITTED BY
LAW, SUPERTECH IS NOT RESPONSIBLE FOR ANY DIRECT, INCIDENTAL, CONSEQUENTIAL
DAMAGES, OR INJURIES RESULTING FROM ANY BREACH OF WARRANTY OR CONDITION;
INCLUDING, BUT NOT LIMITED TO, LOSS OF USE, LOSS OF REVENUE, LOSS OF ACTUAL OR
ANTICIPATED PROFITS, LOSS OF BUSINESS, LOSS OF OPPORTUNITY, LOSS OF GOOD WILL,
LOSS OF REPUTATION, OR ANY DIRECT, INDIRECT, OR CONSEQUENTIAL LOSS OR DAMAGE
WHATSOEVER CAUSED, INCLUDING THE REPLACEMENT OF EQUIPMENT AND PROPERTY.
CUSTOMER RESPONSIBILITIES:
Customers may be required to provide proof of purchase date, respond to questions designed
to assist with diagnosing potential issues, and follow Trailer Valet’s directions to make a claim
on your warranty.
TO MAKE A WARRANTY CLAIM:
Contact us either through:
PHONE: [phone]
EMAIL: [e-mail]
WEBSITE: www.trailervalet.com
TRAILER VALET SHALL HAVE THE EXCLUSIVE RIGHT TO DETERMINE IF A UNIT IS
COVERED UNDER ITS LIMITED MANUFACTURER’S WARRANTY.
SEVERABILITY:
The invalidity, illegality, or unenforceability of any provision of this warranty shall not render the
other provisions invalid, illegal, or unenforceable.
GOVERNING LAW AND JURISDICTION
This warranty shall be governed by the laws of the State of California. The courts of California
shall have the exclusive right to adjudicate any disputes arising under or in connection to this
warranty.

SUPERTECH S. CORP.
Customer Service: [phone]
Email: [e-mail]
WWW.TRAILERVALET.COM
Copyright 2023 by Supertech S. Corporation. All rights reserved. No portion of
this manual or any artwork contained herein may be reproduced in any shape or
form without the express written consent of Supertech S. Corporation.
For further information or if you have any questions, please contact:
Rev 9.28.23