TRENDnet TEW-750DAP User manual

TRENDnet User’s Guide
Cover Page
TEW-750DAP
User’s Guide

© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
Table of Contents
i
Contents
Product Overview.......................................................................... 2
Package Contents..........................................................................................2
Features.........................................................................................................2
Product Hardware Features............................................................................3
Installation ..................................................................................... 4
Wireless Performance Considerations ............................................................4
Hardware Installation......................................................................................5
Configuration................................................................................. 5
Log in the Web-based Management ...............................................................5
Main > Wizard................................................................................................6
Main > LAN....................................................................................................7
LAN Connection Type – Static IP................................................................8
Main > Password............................................................................................9
Main > Time .................................................................................................10
Main > IPv6..................................................................................................11
IPv6 Connection Type – Static IPv6..........................................................11
IPv6 Connection Type – Auto-configuration (SLAAC/DHCPv6) .................12
IPv6 Connection Type – Link-local Only....................................................12
Wireless > Basic...........................................................................................12
Wireless Network Settings – 2.4GHz Band ...............................................13
Wireless Mode – WDS..............................................................................14
Wireless Mode – WDS+AP.......................................................................14
Wireless Security Mode............................................................................14
Wireless Security Mode – None................................................................14
Wireless Security Mode – WEP ................................................................15
Wireless Security Mode – WPA-Personal .................................................15
Wireless Security Mode – WPA-Enterprise ...............................................16
Wireless Network Settings – 5GHz Band.................................................. 17
Wireless Mode – WDS.............................................................................17
Wireless Mode – WDS+AP ...................................................................... 17
Wireless Security Mode – None ............................................................... 18
Wireless Security Mode – WEP................................................................ 18
Wireless Security Mode – WPA-Personal.................................................18
Wireless > Advanced ................................................................................... 19
Wireless > Wi-Fi Protected Setup.................................................................19
Status > Device Information......................................................................... 22
Status > Log ................................................................................................23
Status > Statistic..........................................................................................23
Status > Wireless.........................................................................................24
Status > IPv6............................................................................................... 24
Access > MAC Filters...................................................................................25
Access > Guest Zone...................................................................................26
Access > Advanced Network........................................................................ 26
Tools > Restart ............................................................................................27
Tools > Firmware.........................................................................................27
Tools > Ping Test.........................................................................................28
Tools > Email Settings ................................................................................. 28
Tools > Syslog.............................................................................................29
Tools > Schedules ....................................................................................... 29
Networking Basics ...................................................................... 30
Wireless Basics........................................................................... 31
Wireless Security......................................................................... 32
Technical Specifications............................................................. 33

© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW750D P
2
Product Overview
Package Contents
The package includes:
•TEW-750DAP Wireless Access Point (AP)
•CD-ROM (Utility & User’s Guide)
•Multi-language Quick Installation Guide
•Network cable (1.5m / 5ft)
•Power adapter (DC12V, 1A)
If any pa kage ontents are missing or damaged, please onta t the retail store, online
retailer, or reseller/distributor that the item was pur hased.
Features
TRENDnet TEW-750DAP Dual Band Wireless AP produces the ultimate wireless
experience with up to 300Mbps for the 802.11n wireless connection.
•4 x 10/100Mbps Auto-MDIX LAN ports
•1 x Wi-Fi Protected Setup (WPS) button
•On / Off power switch
•Compliant with IEEE 802.11a/b/g
•Compliant with IEEE 802.11n 2.0
•Compliant with IEEE 802.3 and 802.3u
•One touch wireless connection using the WPS button
•Easy setup via Web browser
•User-friendly Setup Wizard

© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW750D P
3
Product Hardware Features
Rear Panel View
•Reset Button Press and hold this button for 10 seconds to reset your AP
to default settings.
•WPS Button –Push and hold this button for 5 seconds to activate WPS.
•LAN Ports – Connect Ethernet cables (also called network cables) from
your AP LAN ports to your wired network devices.
•Power Port – Connect the included power adapter from your AP power
port and to an available power outlet.
Note: Use only the adapter that came with the AP.
•ON/OFF Button – Press the button to power on and off.
LAN Ports
Reset Button
WPS Button
Power Port
ON/OFF Button

© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW750D P
4
Front Panel View
•WPS LED – This indicator is turned on and blinks when WPS is
activated. The LED will turn off automatically once WPS is completed.
•Wireless LAN LED – This indicator lights on when the link is established.
The indicator blinks when there is data transmission.
•LAN LEDs – This indicator lights when there is a connection on the port.
•Power LED -This indicator lights on when the AP is powered on.
Installation
Placement of the AP is very important. Do not place the AP in an enclosed area
such as a closet, cabinet, or in the attic or garage.
Wireless Performance Considerations
The wireless AP allows you to access your network using a wireless connection
from virtually anywhere within the operating range of your wireless network.
However, the number, thickness and location of walls, ceilings, or other objects
that the wireless signals must pass through, may limit the range. Typical ranges
vary depending on the types of materials and background RF (radio frequency)
noise in your home or business. The key to maximizing wireless range is to
follow these basic guidelines:
1. Keep the number of walls and ceilings between the AP and other
network devices to a minimum - each wall or ceiling can reduce your
adapter’s range from 3-90 feet (1-30 meters.) Position your devices so
that the number of walls or ceilings is minimized.
2. Be aware of the direct line between network devices. A wall that is 1.5
feet thick (.5 meters), at a 45-degree angle appears to be almost 3 feet
(1 meter) thick. At a 2-degree angle it looks over 42 feet (14 meters)
thick! Position devices so that the signal will travel straight through a wall
or ceiling (instead of at an angle) for better reception.
3. Building Materials make a difference. A solid metal door or aluminum
studs may have a negative effect on range. Try to position access points,
wireless APs, and computers so that the signal passes through drywall
or open doorways. Materials and objects such as glass, steel, metal,
walls with insulation, water (fish tanks), mirrors, file cabinets, brick, and
concrete will degrade your wireless signal.
4. Keep your product away (at least 3-6 feet or 1-2 meters) from electrical
devices or appliances that generate RF noise.
5. If you are using 2.4GHz cordless phones or X-10 (wireless products such
as ceiling fans, lights, and home security systems), your wireless
connection may degrade dramatically or drop completely. Make sure
your 2.4GHz phone base is as far away from your wireless devices as
possible. The base transmits a signal even if the phone in not in use.
WPS LED
Wireless LAN LED
Power LED
LAN LEDs

© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW750D P
5
Hardware Installation
1. Position your AP close to your computer. Place the AP in an open area
of your intended work area for better wireless coverage.
2. Plug one end of the included blue Ethernet cable that came with your AP
into one of the four Ethernet ports on the back of the AP. Plug the other
end of this cable into the Ethernet port of your PC.
3. Connect the supplied power adapter into the power port on the back of
the AP and then plug it into a power outlet or surge protector. Press the
power button and verify that the power LED is lit. Allow 1 minute for the
AP to boot up.
Configuration
Log in the Web-based Management
1. Open your web browser (e.g. Internet Explorer, Firefox, Safari, Chrome, or
Opera) and go to http://192.168.10.100. Your AP will prompt you for a user
name and password.
2. When entering the user interface at the first time, the AP requests the user to
change the password. It is highly recommended to change to a new
password. Enter the new password in the Password and Verify Password
field, and click Next. If the user does not change the password, the default
password is admin.
3. The window displays the wireless settings of the AP. The user can print out
or write down the information for Wi-Fi settings. Click Save to implement the
changes and continue.
4. The AP is saving the settings.

© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW750D P
6
5. After first-time, you will see the following login window when log in the AP.
Enter the default user name and password and then click Login. If you
changed the password in first-time login, enter the new password you set.
Default User Name: admin
Default Password: admin
6. The main window appears. You can configure the AP by using the Setup
Wizard or detail manual configuration.
Main > Wizard
The wizard displays the information of wireless connection. Click Exit to finish
the configuration.

© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW750D P
7
Main > LAN
This window allows you to configure the local network settings and DHCP
settings.
LAN Connection Type
My LAN Connection is: Use the drop-down list to select the LAN connection
type. The available types are Static IP and Dynamic IP (DHCP).
When selecting Static IP, the user need to manually configure the AP’s network
settings. When selecting Dynamic IP (DHCP), the AP will automatically obtain
the network settings from an existing DHCP server on the network.

© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW750D P
8
LAN Connection Type – Static IP
After selecting Static IP from the My LAN Connection is drop-down list, the
following parameters will be available to be configured.
IP Address: Enter the IP address of the AP. This IP address must be within your
local network address range.
Subnet Mask: Enter the Subnet Mask of the AP.
Default Gateway: Enter the Gateway IP address. This is normally the local IP
address of the Internet gateway within the network.
Primary DNS Server: Enter the primary Domain Name System (DNS) server IP
address that is supplied by your ISP.
Secondary DNS Server: Enter the secondary DNS server IP address that is
supplied by your ISP.
DHCP Server Settings
Enable DHCP Server: When enabling this feature, the AP will host the DHCP
server on the network.
DHCP IP Address Range: Enter the starting and ending IP address for the
DHCP server’s IP assignment.
Default Subnet Mask: Enter the subnet mask of the IP address.
Default Gateway: Enter the default gateway for DHCP server.
Default WINS: Enter the default Windows Internet Name Servers (WINS)
address.
Default DNS: Enter the default DNS server address.
DHCP Lease Time: The length of time for the IP address lease. Enter the time in
minutes.
Always Broadcast: If all the computers on the LAN successfully obtain their IP
addresses from the router’s DHCP server as expected, this option can remain
disabled. However, if one of the computers on the LAN fails to obtain an IP
address from the router’s DHCP server, it may have an old DHCP client that
incorrectly turns off the broadcast flag of DHCP packets.
Enabling this option will cause the router to always broadcast its responses to all
clients, thereby working around the problem, at the cost of increased broadcast
traffic on the LAN.
Add DHCP Reservation
Enable: Tick the check box to enable the reservation.
Computer Name: Enter the computer name or select from the drop-down menu
and click <<.

© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW750D P
9
IP Address: Enter the IP address you want to assign to the computer or device.
This IP Address must be within the DHCP IP Address Range.
MAC Address: Enter the MAC address of the computer or device.
Clone Your PC’s MAC Address: If you want to assign an IP address to the
computer you are currently on, click this button to populate the fields.
Click the Add / Update button to save the entry. Click the Clear button to delete
all the information in this section.
DHCP Reservation List
This section displays the reservation entries. The entries include host name, IP
address and MAC address. Tick the Enable check box of the corresponding
entry to enable the reservation. Click the button box of the corresponding
entry to modify the entry. Click the button of the corresponding entry to
remove the entry.
Number of Dynamic DHCP Clients
This section displays the available DHCP clients.
Click the Save Settings button to accept the changes made.
Click the Don’t Save Settings button to discard the changes made.
Main > Password
This window allows you to change the Administrator password. You can also
enable Remote Management.
Admin Password
Password: Enter a password for the administrator login.
Verify Password: Re-type the administrator password.
System Name
Gateway Name: Enter a name for the AP.
Click the Save Settings button to accept the changes made.
Click the Don’t Save Settings button to discard the changes made.

© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW750D P
10
Main > Time
This window allows you to configure, update, and maintain the correct time on
the internal system clock. You can set the time zone that you are in and set the
Time Server. Daylight saving can also be configured to automatically adjust the
time when needed.
Time and Date Configuration
Time: Displays the current date and time of the AP
Time Zone: Select your time zone from the drop-down menu.
Enable Daylight Saving: Tick the check box to enable the daylight saving when
your local time has daylight saving.
Daylight Saving Offset: Use the drop-down menu to select the daylight savings
offset from standard time.
Daylight Saving Dates: Use the drop-down menu to select the start and end
date for daylight saving time.
Automatic Time and Date Configuration
Automatically synchronize with Internet time server: Tick the check box to
automatically synchronize the AP’s time with a NTP server.
NTP Server Used: Enter the IP address of a NTP server that the AP
synchronizes the time with.
Click the Update Now button to connect to the NTP server and synchronize the
time.
Set the Time and Date Manually
In this section, you can manually select the specific time for the AP. Use the
drop-down menus of Year, Month, Day, Hour, Minute and Second to configure
the AP’s time. You can also click the Synchronize with Your Computer’s Time
Settings button to have the AP’s time the same as your local computer.
Click the Save Settings button to accept the changes made.
Click the Don’t Save Settings button to discard the changes made.

© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW750D P
11
Main > IPv6
This window allows you to configure the IPv6 connection. The available IPv6
connection are Static IPv6, Auto-configuration (SLAAC/DHCPv6), and Link-
local Only.
IPv6 Connection Type – Static IPv6
LAN IPv6 Address Settings
IPv6 Address: Enter the IPv6 address of the AP.
Subnet Prefix Length: Enter the subnet prefix length.
Default Gateway: Enter the default gateway IPv6 address.
Primary DNS Server: Enter the primary IPv6 DNS server address.
Secondary DNS Server: Enter the secondary IPv6 DNS server address.

© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW750D P
12
IPv6 Connection Type – Auto-configuration (SLAAC/DHCPv6)
IPv6 DNS Settings
Obtain IPv6 DNS Servers automatically: Allows the AP to automatically obtain
IPv6 DNS server IP addresses.
Use the following IPv6 DNS Servers: Manually enters the IPv6 DNS server IP
addresses.
Primary DNS Server: Enter the primary IPv6 DNS server address. This field is
only available when Use the following IPv6 DNS Servers is selected.
Secondary DNS Server: Enter the secondary IPv6 DNS server address. This
field is only available when Use the following IPv6 DNS Servers is selected.
IPv6 Connection Type – Link-local Only
LAN IPv6 Address Settings
LAN IPv6 Link-local Address: This field displays the LAN IPv6 link-local
address.
Click the Save Settings button to accept the changes made.
Click the Don’t Save Settings button to discard the changes made.
Wireless > Basic
This window allows you to set up wireless settings of the AP.

© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW750D P
13
Wireless Network Settings – 2.4GHz Band
Wireless Band: This displays the wireless band that the AP is used.
Enable Wireless: Tick the check box to enable the wireless feature for the
2.4GHz band on this AP. Use the drop-down menu to apply a time schedule to
this wireless network.
Mode: Use the drop-down menu to select the wireless mode. Available options
are AP, WDS, and WDS+AP.
Wireless Network Name: Enter the wireless network name (SSID). This name
will be available when wireless clients scan for available wireless networks.
However, when Visibility Status is set to Invisible, this name will not be visible
to wireless clients.

© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW750D P
14
802.11 Mode: Select which 802.11 wireless modes to use from the drop-down
menu. Options to choose from are 802.11b only, 802.11g only, 802.11n only,
Mixed 802.11g and 802.11b, Mixed 802.11n and 802.11g, and Mixed 802.11n,
802.11g and 802.11b. If you are not sure, select Mixed 802.11n, 802.11g and
802.11b.
Enable Auto Channel Scan: Tick the check box to allow the AP to find and use
the wireless channel with the least interference in your environment.
Wireless Channel: Deselect Enable Auto Channel Scan to be able to
configure this. Use the drop-down menu to select a wireless channel.
Transmission Rate: Select the wireless transmission rate. It is advisable to keep
this option on Best (Automatic).
Channel Width: Select the wireless channel width used. Options to choose from
are 20MHz and 20/40MHz (Auto).
Visibility Status: Click Invisible to hide the Wireless SSID and Visible to reveal
it.
WMM Enable: WMM is QoS for your wireless network. This will improve the
quality of video and voice applications for your wireless clients.
Wireless Mode – WDS
When selecting WDS in the Mode drop-down menu, the following section
appears.
Remote AP MAC Address: Enter the MAC address of a remote AP. Click the
Site Survey button to see the available AP in the area. Click the radio button to
select the corresponding AP and Connect to have the AP’s MAC address in the
field.
Wireless Mode – WDS+AP
When selecting WDS+AP in the Mode drop-down menu, the following section
appears.
Enable Lazy Mode: Tick the check box to enable the Lazy mode. When
enabling the Lazy mode, there is no need to enter the MAC address of any
remote AP.
Remote AP MAC Address: Enter the MAC address of a remote AP. Click the
radio button to select the corresponding AP and Connect to have the AP’s MAC
address in the field.
Wireless Security Mode
This section allows you to select various wireless security modes for the 2.4GHz
band. The corresponding configuration will then appear at the bottom half of the
window. Available options are None, WEP, WPA-Personal and WPA-
Enterprise.
Wireless Security Mode – None
By selecting this mode, there will be no wireless security applied to your wireless
network. This means that anyone with a wireless adapter can connect to your
network.

© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW750D P
15
Wireless Security Mode – WEP
Wired Equivalent Privacy (WEP) is any entry level wireless security method that
we can use to prevent unauthorized wireless access to this AP. WEP is not a
very secure option, but it is better than no wireless security.
WEP Key Length: Select the WEP Key Length value as 64 bit (10 hex digits)
or 128 bit (26 hex digits).
Authentication: Select the WEP authentication option. Options to choose from
are Both and Shared Key.
WEP Key: Enter a wireless security key here. This key must be configured on all
the wireless clients for them to be able to connect to your wireless network.
Wireless Security Mode – WPA-Personal
Wi-Fi Protected Access (WPA) is a more advanced wireless security method that
we can use to prevent unauthorized wireless access to this AP. Wi-Fi Protected
Access (WPA2) is the most advanced wireless security method that we can use
to prevent unauthorized wireless access to this AP.
WPA Personal does not require an authentication server.
WPA Mode: Select which WPA mode to use. Options to choose from are Auto
(WPA or WPA2), WPA2 Only, and WPA Only.
Cipher Type: Select the wireless cipher type here. Options to choose from are
TKIP and AES, TKIP, and AES.
Group Key Update Interval: Enter the group key update interval time in
seconds.
Pre-shared Key
Pre-shared Key: Enter the WPA-Personal wireless Pre-Shared Key. This key
must be configured on all the wireless clients for them to be able to connect to
your wireless network.

© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW750D P
16
Wireless Security Mode – WPA-Enterprise
Wi-Fi Protected Access (WPA) is a more advanced wireless security method that
we can use to prevent unauthorized wireless access to this AP. Wi-Fi Protected
Access (WPA2) is the most advanced wireless security method that we can use
to prevent unauthorized wireless access to this AP.
WPA-Enterprise requires the use of an external RADIUS server.
WPA Mode: Select which WPA mode to use. Options to choose from are Auto
(WPA or WPA2), WPA2 Only, and WPA Only.
Cipher Type: Select the wireless cipher type here. Options to choose from are
TKIP and AES, TKIP, and AES.
Group Key Update Interval: Enter the group key update interval time in
seconds.
EAP
RADIUS Server IP Address: Enter the IP address of the external RADIUS
server.
RADIUS Server Port: Enter the external RADIUS server port number.
RADIUS Server Shared Secret: Enter the RADIUS server shared secret. This
key must be configured on all the wireless clients for them to be able to connect
to your wireless network.
Advance Setting: Click the Advanced >> button to configure settings for an
optional secondary RADIUS server.
Second RADIUS Server IP Address: Enter the IP address of the external
RADIUS server.
Second RADIUS Server Port: Enter the external RADIUS server port number.
Second RADIUS Server Shared Secret: Enter the RADIUS server shared
secret. This key must be configured on all the wireless clients for them to be able
to connect to your wireless network.

© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW750D P
17
Wireless Network Settings – 5GHz Band
Wireless Band: This displays the wireless band that the AP is used.
Enable Wireless: Tick the check box to enable the wireless feature for the 5GHz
band on this AP. Use the drop-down menu to apply a time schedule to this
wireless network.
Mode: Use the drop-down menu to select the wireless mode. Available options
are AP, WDS, and WDS+AP.
Wireless Network Name: Enter the wireless network name (SSID). This name
will be available when wireless clients scan for available wireless networks.
However, when Visibility Status is set to Invisible, this name will not be visible
to wireless clients.
802.11 Mode: Select which 802.11 wireless modes to use from the drop-down
menu. Options to choose from are 802.11a only, 802.11n only, and Mixed
802.11a and 802.11n. If you are not sure, select Mixed 802.11a and 802.11n.
Enable Auto Channel Scan: Tick the check box to allow the AP to find and use
the wireless channel with the least interference in your environment.
Wireless Channel: Deselect Enable Auto Channel Scan to be able to
configure this. Use the drop-down menu to select a wireless channel.
Transmission Rate: Select the wireless transmission rate. It is advisable to keep
this option on Best (Automatic).
Channel Width: Select the wireless channel width used. Options to choose from
are 20MHz and 20/40MHz (Auto).
Visibility Status: Click Invisible to hide the Wireless SSID and Visible to reveal
it.
WMM Enable: WMM is QoS for your wireless network. This will improve the
quality of video and voice applications for your wireless clients.
Wireless Mode – WDS
When selecting WDS in the Mode drop-down menu, the following section
appears.
Remote AP MAC Address: Enter the MAC address of a remote AP. Click the
radio button to select the corresponding AP and Connect to have the AP’s MAC
address in the field.
Wireless Mode – WDS+AP
When selecting WDS+AP in the Mode drop-down menu, the following section
appears.
Enable Lazy Mode: Tick the check box to enable the Lazy mode. When
enabling the Lazy mode, there is no need to enter the MAC address of any
remote AP.

© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW750D P
18
Remote AP MAC Address: Enter the MAC address of a remote AP. Click the
radio button to select the corresponding AP and Connect to have the AP’s MAC
address in the field.
Wireless Security Mode
This section allows you to select various wireless security modes for the 5GHz
band. The corresponding configuration will then appear at the bottom half of the
window. Available options are None, WEP, WPA-Personal and WPA-
Enterprise.
Wireless Security Mode – None
By selecting this mode, there will be no wireless security applied to your wireless
network. This means that anyone with a wireless adapter can connect to your
network.
Wireless Security Mode – WEP
Wired Equivalent Privacy (WEP) is any entry level wireless security method that
we can use to prevent unauthorized wireless access to this AP. WEP is not a
very secure option, but it is better than no wireless security.
WEP Key Length: Select the WEP Key Length value as 64 bit (10 hex digits)
or 128 bit (26 hex digits).
Authentication: Select the WEP authentication option. Options to choose from
are Both and Shared Key.
WEP Key: Enter a wireless security key here. This key must be configured on all
the wireless clients for them to be able to connect to your wireless network.
Wireless Security Mode – WPA-Personal
Wi-Fi Protected Access (WPA) is a more advanced wireless security method that
we can use to prevent unauthorized wireless access to this AP. Wi-Fi Protected
Access (WPA2) is the most advanced wireless security method that we can use
to prevent unauthorized wireless access to this AP.
WPA Personal does not require an authentication server.
WPA Mode: Select which WPA mode to use. Options to choose from are Auto
(WPA or WPA2), WPA2 Only, and WPA Only.
Cipher Type: Select the wireless cipher type here. Options to choose from are
TKIP and AES, TKIP, and AES.
Group Key Update Interval: Enter the group key update interval time in
seconds.

© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW750D P
19
Pre-shared Key
Pre-shared Key: Enter the WPA-Personal wireless Pre-Shared Key. This key
must be configured on all the wireless clients for them to be able to connect to
your wireless network.
Click the Save Settings button to accept the changes made.
Click the Don’t Save Settings button to discard the changes made.
Wireless > Advanced
This window is used to configure more advanced wireless settings on the AP.
Wireless Band: Displays the wireless band that can be configured.
Transmit Power: Select the wireless transmit power for the 2.4GHz band.
Options to choose from are 100%, 50%, 25% and 12.5%.
Beacon Period: Enter the duration between beacon packets in milliseconds.
Preamble Type: Click to select Short Preamble or Long Preamble.
DTIM Interval: Enter a Delivery Traffic Indication Message interval.
Click the Save Settings button to accept the changes made.
Click the Don’t Save Settings button to discard the changes made.
Wireless > Wi-Fi Protected Setup
This window is used to configure the Wi-Fi Protected Setup (WPS) settings on
the AP.
Wi-Fi Protected Setup
Enable: Tick the check box to enable the Wi-Fi Protected Setup (WPS) feature.
Wi-Fi Protected Setup: Displays the status of the WPS feature.