Triplex MP4 SDVR User manual

Triplex MP4 SDVR
MANUAL
Stand Alone Type
DVR SYSTEM
Firmware 2.0 Version
Revision Date : 2005.01.31

Firmware ver 2.0
Modification Date : 2005.01.31
Please refer the below message to confirm the modify contents.
1. PTZ CONTROL
* ADD PRESET FUNCTION : FOR PELCO-D PROTOCOL
* ADD SWING FUNCTION : FOR DONGYANG CAMERA ( D-MAX )
2. CD-RW ( CD Read & Write Burner )
* ADD CD-RW FUNCTION FOR DATA BACKUP
3. IE BROWSER
* ADD IE BROWSER ( ALLOW FOUR USERS MONITORING AT
THE SAME TIME )
1

INDEX
CHAPTER 1. ( Specification & System Organization )
1.1 Specification ------------------------------------------------------------------------------ 5
1.2 Product Contents List ------------------------------------------------------------------ 6
1.3 System Organization ------------------------------------------------------------------ 7
CHAPTER 2. ( Description )
2.1 Front Panel -- ----------------------------------------------------------------------------- 8
2.2 Rear Panel -------------------------------------------------------------------------------- 9
2.3 Remote Controller ---------------------------------------------------------------------- 10
CHAPTER 3. ( Installation )
3.1 Hard Disk Installation -- --------------------------------------------------------------- 11
3.2 Camera Connection ------------------------------------------------------------------- 13
3.3 Monitor Connection ------------------------------------------------------------------- 13
3.4 Computer Connection -- -------------------------------------------------------------- 13
3.5 Network Connection ------------------------------------------------------------------ 13
3.6 Alarm/Relay/PTZ Connection ------------------------------------------------------- 14
3.7 Power Connection -- ------------------------------------------------------------------- 14
3.8 Finishing Installation ----------------------------------------------------------------- 14
% Hard Disk format --- ------------------------------------------------------------------- 15
CHAPTER 4. ( Monitoring )
4.1 System Power ON ---------------------------------------------------------------------- 16
4.2 Select Screen Mode ------------------------------------------------------------------- 17
4.3 Convert Screen Mode ----------------------------------------------------------------- 17
4.4 Control PTZ/Focus -- ------------------------------------------------------------------ 17
4.5 System Power OFF --------------------------------------------------------------------- 18
CHAPTER 5. ( Search )
Go to Search ---------------------------------------------------------------------------- 19
5.1 Search by Date/Time ------------------------------------------------------------------ 19
5.2 Search by Event ------------------------- ----------------------------------------------- 20
2

INDEX
CHAPTER 6. ( Menu )
Go to Menu -- ---------------------------------------------------------------------------- 22
Menu Initial ----------------------------------------------------------------------------- 22
6.1 Display ----------------------------------------------------------------------------------- 23
6.2 Record ---------------------------------------------------------------------------------- 23
6.2.1 Size/Rec. Rate/Quality -------------------------------------------------------- 23
6.2.2 Timer Recording Setup ------------------------------------------------------ 24
6.2.3 Motion Detection Setup -- ---------------------------------------------------- 25
6.2.4 Alarm Recording Setup ------------------------------------------------------- 25
Time Recording Weekly Setup --- ------------------------------------------ 26
Partial Motion Region Setup --- -------------------------------------------- 27
6.3 Camera ---------------------------------------------------------------------------------- 28
6.3.1 Status/Title Setup -------------------------------------------------------------- 28
6.3.2 Covert/PTZ Setup ------------------------------------------------------------- 28
6.3.3 Color Setup ---------------------------------------------------------------------- 29
6.4 Audio ------------------------------------------------------------------------------------ 29
6.4.1 Audio Recording Setup ------------------------------------------------------ 29
6.4.2 Live Audio Setup -------------------------------------------------------------- 30
6.5 Alarm ------------------------------------------------------------------------------------ 15
6.5.1 Alarm Input Setup ------------------------------------------------------------- 15
6.5.2 Relay Output Setup ---------------------------------------------------------- 16
6.6 System ---------------------------------------------------------------------------------- 15
6.6.1 Date/Time ------------------------------------------------------------------------ 18
6.6.2 Network --------------------------------------------------------------------------- 18
6.6.3 Buzzer Setup -------------------------------------------------------------------- 19
6.6.4 Password -- ---------------------------------------------------------------------- 19
6.6.4.1 Administrator Password ------------------------------------------- 18
6.6.4.2 Manager Password --------------------------------------------------- 18
6.6.4.3 Operator Password -------------------------------------------------- 19
6.6.4.4 Network Password -- ------------------------------------------------- 19
6.6.5 Disk Write Mode ---------------------------------------------------------------- 19
6.6.6 System Information ---------------------------------------------------- 18
6.6.7 Factory Default ---------------------------------------------------------- 18
6.6.7 CD-RW Backup ----------------------------------------------------------------- 19
3

INDEX
CHAPTER 7. ( Remote Agent )
System Requirement -- --------------------------------------------------------------- 38
DVR Remote Agent 1.0 Installation ------------------------------------------------ 39
7.1.1 Monitoring --------------------------------------------------------------------------- 15
7.1.1 Function Introduction -------------------------------------------------------- 15
7.1.2 Screen Division Selection -------------------------------------------------- 16
7.1.3 PTZ Control -- ------------------------------------------------------------------- 16
7.1.4 Selection Network ID ---------------------------------------------------------- 16
7.1.5 AVI File Conversion -- --------------------------------------------------------- 16
7.1.6 Color Adjustment -------------------------------------------------------------- 16
7.2 Search ----------------------------------------------------------------------------------- 15
7.2.1 Function Introduction -------------------------------------------------------- 15
7.2.2 Search Method ----------------------------------------------------------------- 16
7.2.3 Search Option -- -------------------------------------------------------------- 16
7.3 Setting ---------------------------------------------------------------------------------- 15
7.3.1 Connection ID Setup --------------------------------- ----------------------- 15
7.3.2 Option Setting ----------------------------------------------------------------- 16
CHAPTER 8
Time Table ------------------------------------------------------------------------------------ 53
PTZ Protocol -------------------------------------------------------------------------------- 54
PTZ Control -------------------------------------------------------------------------------- 55
PTZ Reset ----------------------------------------------------------------------------- 56
Swing --------------------------------------------------------------------------------- 56
Cross Cable Making Tip ---------------------------------------------------------------- 55
4

Specification & Organization
Hardware CPU
HDD
32 bit DSP
Unlimited HDD x 1 ~ 4
Video Input
RTOS
Display Speed
OS
4CH NTSC/PAL
120 ( PAL: 100 ) fps
Display Modes Full , Quad , Sequence
Recording Speed
352 x 240
704 x 240
704 x 480
120 / 100
60 / 50
MPEG4 ( Optimized )
Monitor Output BNC / S-Video / 4 loop-out / 1 Spot-out
Recording Resolution NTSC : 352x240 , 704x240 , 704x480
PAL : 352x288 , 704x288 , 704x576
Compression Method
Byte Size per Image
3~5 Kbyte@ 352x240 ( PAL : 352x288 )
5~10 Kbyte@ 704x240 ( PAL : 704x288 )
6~16 Kbyte@ 704x480 ( PAL : 704x576 )
Recording Modes Continuous , Motion , Alarm
Recording Schedule Schedule setting per camera
Motion Detection 132 grids setting per camera
Audio input / Output 4 inputs / 1 output
Sensor / Alarm
1 CII
4 inputs / 1 output
VGA Output ( Optional )
PTZ Control & Port RS-485
Network TCP/IP , IE , AP
Password
Internet viewers Allow 4 viewers on the line at the same time
4 password level
Back-up LAN , CD-RW , Internet
Search Modes
30 / 25
By Time & Event
Search Speeds Up to 64 on both forward & backward
CH & Frames
Resolution
4CH ( CIF/30FPS )
Highest
4CH ( 2CIF/15FPS )
4CH ( D1/7FPS )
4CH ( D1/1FPS )
High Standard Low
41
37
19
93
58
46
23
132
93
74
38
154
154
123
61
185
80G HDD Storage Capacity ( hour )
This Value is for continuous recording in bright place and large movement .
So it can be extend 2 ~ 3 times for ordinary environment .
5

Packing Contents
1.2 Product Contents List
Please confirm the contents when you open packing .
Basic Contents
1
DVR Machine 12 Adaptor Power Cable
User Manual Remote Controller Remote Viewer CD
IDE HDD VGA Out & GOIP Port
Optional Devices
2
6

System Organization
Relay Out
Network
TCP/IP
Remote
Controller
Alarm Input/Out
Alarm Sensor #1- 4
Video In
Camera # 1- 4
Video Out
AV Monitor
VGA
Monitor
VCR
Client PC
1.3 System Organization
7

Front Panel Description
112346
811
10
9
75
12
2.1 Front Panel
1. Power : System Power On/Off
2. LED Indicator : Indicate Present System Situation
( POWER : System On/Off , RECORD : record On/Off , NETWORK :
Client Network Connect On/Off , ALARM : Alarm Sensor On/Off )
3. Channel Select Button : When Select Channel or Input Password
4. SCR Mode : When Select Screen Division Mode or Rotation Mode
5. Menu : Go to System Menu
6. Search : Go to Search Mode for Searching Recorded Video
7. PTZ / Focus : Go to Camera PTZ / Focus Control
8. Remote Controller Sensor Input
9. Search Controller : Searching Recorded Video or Control Menu & PTZ / Focus
10. ENTER : Press Enter to Apply Changing Setup
11. RETURN : Cancel Setup or Return Previous Mode
12. CD-RW Burner
Tip
Power Button is soft style to Prevent System Failure by wrong operation .
Channel Selection Button is prior to SCR mode .
When Remote Controller Sensor Input is blocked by something it cause
Remote controller do not work properly .
When press any button . It operate with Beep Sound .
8

Rear Panel Description
¨ç ¨é
¨ê ¨ë
¨ì ¨ï
¨î ¨ð
¨ñ
¨ó
¨è ¨í
¨ò
¨ç ¨é
¨ê ¨ë
¨ì ¨ï
¨î ¨ð
¨ñ
¨ó
¨è ¨í
¨ò
2.2 Rear Panel
1. Video in : BNC Port which connected DVR & Camera ( 4 camera connect able )
2. Loop Back : Output DVR camera video to loop back port ( 4 BNC ports )
3. Monitor Out : Output DVR video when connected AV Monitor .
4. Spot Out : Output spot out video to AV Monitor
5. NTSC/PAL : NTSC / PAL switch able .
6. VGA Out : Connected VGA card to output video at computer monitor ( optional )
7. SVHS : Output video to connect SVHS terminal
8. Audio Out : Output recorded audio
9. Audio In : AV terminal which connected camera # 1 ~ 4 for input audio .
10. Ethernet (TCP/IP) : Connect port for LAN cable (Possible to remote survey to
to connect to client )
11. Alarm/relay/RS-485 : Connect port for sensor & relay , PTZ
12. RS-232 : For program debug & expand connection (not available now )
13. DC Power Input Terminal : Power supply by DC 12V Adaptor .
Tip
•When System Installation, Please Connect when System Off.
•Please Use Specific Adaptor when Power Supply.
Tip
•When System Installation, Please Connect when System Off.
•Please Use Specific Adaptor when Power Supply.
1
2
3
45
6
78
9
10
11 12
13
9

IR Remote Controller Description
(4ch Available, #1~4 Button)
1
Channel Select Button
POWER
System
ON/OFF
MENU: Open menu
ENTER: Apply Setup Change
Search Controller : Control Playback Option
1
RETURN
Cancel
Setup or
Return to
Previous
Change
Screen Mode
Open
Search Mode
( EX. Speed of Playback, Move on Menu,
1Control PTZ/Focus)
PTZ/IRIS
Mode
2.3 IR Remote Controller
10

Installation
3.1 Hard Disk Installation
Jumper Setup Master or Slave
1
Example of Samsung HDD Jumper Setup
IDE Cable Connection to Main Board
3
Jumper Setup as Master or Slave refer to explanation
of surface Hard Disk .
Jumper is located at Hard Disk data cable or rear side
of Hard Disk .
If one Hard Disk installation , setup as Master
If two Hard Disk installation , second one setup as slave
!! system offWhen Hard Disk add or exchange, must
properly ( power button system off ) if not , it a cause
Of fatal error of disk .
Refer to general pin setting in jumper pin setting on HDD
Surface .
When one HDD installed , setup pin as Master and connect
Pin at the left end of jumper .
When two HDD installed or add HDD, one is for Master and
The other is for Slave. Slave setup has No pin .
When mor than two HDD installation, setup as Master &
Slave to connect one IDE cable the same method of above .
!! Please use HDD which can supply higher than !!UDMA66
Confirm the IDE cable inside of product
Among the three connector, indicated blue color
Connector must be connected with main board ,
Other connectors connected with HDD .
11

Installation
Connect IDE cable to Hard Disk
3
Insert disk, red cable head to power cable plug
Connect power cable to Hard Disk in the same way
Pin at the left end of jumper .
If one HDD install, connect with end of connector
( Black ) recommended .
If add HDD, connect with middle connector ( Gray )
Recommended .
One HDD Installation Two HDD Installation
After finishing cable connection, attach Hard Disk with screw & bracket
4
Tip
IDE Hard Disk can connect two equipment at one
Cable (port). For the purpose of prevent confusing
, two equipment named Master & Slave .
Master is one Hard Disk or first Hard Disk , Slave
Is below second Hard Disk .
Master , Slave ?
12

Installation
3.1 Hard Disk Installation
Connect camera at BNC port in back side panel .
3.3 MONITOR CONNECTION
Connect Monitor terminal or S-VHS to Monitor .
3.4 COMPUTER CONNECTION
Connect VGA out to computer monitor .
3.5 NETWORK CONNECTION
Connect Ethernet terminal and network cable to Internet .
13

Installation
3.6 ALARM / RELAY / PTZ CONNECTION
123
1ALARM
Alarm Input - 1N1,1N2 , 1N3 : connect sensor input by channel
GND : Connect to Ground system .
2RELAY
Alarm Output NO , NC : After checking Alarm output type ( Normal Open or Normal
Close ) and connect to NO , NC .
COM : Connect remain grounding conductor .
3RS-485
Connect PTZ camera D+ , D- : Connect PTZ camera control line ( + , - terminal )
PTZ 14 Pin Cable
¨ï R+
¨ð R-
¨ñ T+
¨ò T-
RS485
D+
D-
PTZ 14 Pin Cable
¨ï R+
¨ð R-
¨ñ T+
¨ò T-
RS485
D+
D-
9
10
11
12
3.7 POWER CONNECTION
3.8 FINISHING CONNECTION
14

System Power On
Hard Disk Format
- If do not new Hard Disk format , system can t recognize the HDD .
So there is same situation of No HDD, please format HDD when insert new HDD
( Only Display possible , not work Menu & Search )
Checking Hard Disk Drives ...
Disk0 [SANSUNG SP0002N]
Total 1 Hard Disk Drive Found.
New System Disk Detected.
All Disks will be formatted.
Format All Disks ? NO (0)
1. Power On
2. New HDD Format
( Select Play , Backward Play key )
SETUP
User
Password
Administrator
3. System Start
( Initial Mode )
15

System Power On
4.1 SYSTEM POWER ON
Press Power button to start system
After checking Hard Disk, need input password
to operation .
Initial screen view mode is quad division mode
and recording mode .
CAMERA
2004/01/01
00:00:00
CAMERACAMERA
2004/01/01
00:00:00
Picture Power On
After finishing installation
Each channel indicate camera Name & Recording
Present Time & Date indicate at monitor central
Lower side .
Status .
Tip •Check System Condition at LED
POWER : Showing System On/Off
RECORD : Showing Record On/Off
NETWORK : Showing Client Connection Status
ALARM :Lighting whenSensor Alarm Activate
Tip •Check System Condition at LED
POWER : Showing System On/Off
RECORD : Showing Record On/Off
NETWORK : Showing Client Connection Status
ALARM :Lighting whenSensor Alarm Activate
4.2 SELECT SCREEN MODE
Select one channel among 4 channels
Move to one enlargement watch mode when
Quad Screen division mode .
Move to one enlargement watch mode when
Rotation mode .
16

System Power On
4.3 Convert Screen Mode ( SCR MODE )
User can select 3 kinds watch mode :
% Quad (4CH) division watch mode
% Selected 1CH watch mode
Quad (4CH) watch mode is initial mode when system start
% 4CH rotation watch mode
SCR MODE
Quad (4CH) Division
Watch Mode
Selected 1CH
Watch Mode
4CH Rotation Mode
Quad (4CH) Division
Watch Mode
Selected 1CH
Watch Mode
4CH Rotation Mode
4.4 PTZ / FOCUS CONTROL
PTZ/FOUCS
Control camera PTZ (Pan/Tilt/Zoom) & Focus (Only
Press PTZ/FOCUS button to open PTZ Menu at right-
Nder side and control by search controller .
Press PTZ/FOCUS button second time to open focus
/IRIS Menu and control by search controller .
Useable for proper camera .
PTZ CTL
UP
LEFT RIGHT
DOWN
FOCUS/IRISCTL
UP
LEFT RIGHT
DOWN
Control Camera PTZ &
Focus by Search
Controller on PTZ Menu
Search Controller
PTZ CTL
UP
LEFT RIGHT
DOWN
PTZ CTL
UP
LEFT RIGHT
DOWN
FOCUS/IRISCTL
UP
LEFT RIGHT
DOWN
FOCUS/IRISCTL
UP
LEFT RIGHT
DOWN
Control Camera PTZ &
Focus by Search
Controller on PTZ Menu
Search Controller
17

System Shut Down
SHUTDOWN
User
Password
Administrator
4.5 SYSTEM POWER OFF
Press Power button to system off
Input Password and press Enter to shutdown
system .
Tip
System Log-on password : Administrator , Manager , Operator , Network
Administrator : All function access ( system on , shutdown , stop , search )
Manager : System on and Search
Operator : System On
Network : Connect by remote program
18

SEARCH
1. Search by Date/Time
Search
>
1. Search by Date/Time
>
Go to Search Mode
SEARCH
ENTER
RETURN
Press search button and Log-in
Administrator or manager
Use direction key to move menu
To open each menu press enter
Return to Previous
( Move to previous Menu or Exit Search
Mode and return to watch mode )
Search Recorded Data
5.1 SEARCH BY DATE/TIME
- Possible to Search Recorded Date & Time
Mar 2004
Sun Mon Tue Wed Thu Fri Sat
123
78910
456
11 12 13
14 15 16 17 18 19 20
21 22 23 25 26 27
28 29 30 31
24
1234567
8910 11 12 13 14
15 16 17 18
10
19 20 21
Move cursor to selected date in calendar
( Recorded Date&Time indicated by gray color )
Press Enter to open selected date
Recorded Time appear to under side
Press Enter at selected time
( One scale is 15 minutes )
Menu disappear and output recorded video
2004.01.01
00:00:00
Showing recorded Date&Time at left-upper side
as watch mode .
Showing playing condition at right-under side .
Channel selection button in watch mode & SCR
Mode button are apply the same as search mode .
( but Menu , Search , and PTZ/FOCUS buttons
are Exception )
19