Tripp Lite B136-100-WP-1 User manual

Owner’s Manual
1
Component Video + Stereo
Audio over Cat5 Extenders
and Extender/Splitters
Extender Kit Models:
B136-101 and B136-101-WP-1
Extender/Splitter Local Unit Models:
B136-004
Extender Unit Models:
B136-100 and B136-100-WP-1
1111 W. 35th Street, Chicago, IL 60609 USA
tripplite.com/support
Copyright © 2019 Tripp Lite. All rights reserved.
WARRANTY REGISTRATION
Register your product today and be automatically entered
to win an ISOBAR surge protector in our monthly drawing!
tripplite.com/warranty
Español 13 • Français 25

2
Package Contents
Product Features
All Units:
• B136-004, B136-100, B136-100-WP-1,
B136-101 or B136-101-WP-1
• Owner’s Manual
B136-004 Only:
• External Power Supply (Input: 100-240V,
50/60 Hz, 0.5A Output: 5V 2A)
• 1 ft. Component + Audio Daisy-Chain Cable
B136-100-WP-1 and B136-101-WP-1 Only:
• Wallplate Hardware
• B136-004 works with a B136-100 or
B136-100-WP-1 to extend a component video
(1080i, 60 Hz) and stereo audio signal up to
300 ft. (91 m) from the source. Extend the signal
up to 400 ft. (121 m) using zero-skew cable
(Tripp Lite P524-01K).
• B136-101 and B136-101-WP-1 are kits that
come with units for both the source side and the
display side, allowing a component video (1080i,
60 Hz) and stereo audio signal to be extended up
to 300 ft. (91 m). Extend the signal up to 400 ft.
(121 m) using zero-skew cable (Tripp Lite
P524-01K).

3
Product Features
• Transmit a component video and stereo audio
signal to up to four A/V devices using the
B136-004 Extender/Splitter.
• Expand the number of connected A/V devices to up
to 13 (12 remote, one local) by daisy-chaining up
to three local units together.
• B136-004 features component video and stereo
audio ports for connecting an optional local A/V
device.
• Up to three B136-004 units can be connected to
a Tripp Lite B132-004-RB Rack-Mount Bracket
and mounted in just 1U of rack space.
• The B136-100, B136-100-WP-1, B136-101 and
B136-101-WP-1 require no external power.
• The B136-101-WP-1 and B136-100-WP-1
wallplates feature RJ45-type connectors, allowing
you to use standard patch cable and avoid 110
punchdown connections.

4
Optional Accessories
• A008-Series Component Video Gold Cables
• A050-Series Stereo Audio Gold Cables
• B132-004-RB 1U Rack-Mount Bracket
• N001-Series Cat5e Snagless Patch Cables
• N002-Series Cat5e Patch Cables
• N020-01K-GY Gray Cat5e Bulk Stranded Cable –
1,000 ft.
• N022-01K-GY Gray Cat5e Bulk Solid-Core Cable –
1,000 ft.
• N030-010 RJ45 Plugs for Solid-Core or Stranded
Wire Cat5e Cable – 10 pack
• N201-Series Cat6 Snagless Patch Cables
• N202-Series Cat6 Snagless 24 AWG Solid-Core
Patch Cable
• N222-01K-GY Gray Cat6 Bulk Solid-Core Cable –
1,000 ft.
• P524-01K Zero-Skew UTP Bulk Cable – 1,000 ft.
Note: The B136-004, B136-100 and B136-100-WP-1 are
sold separately. A B136-100 or B136-100-WP-1 is required
for each output port on the B136-004 extender/splitter that
you wish to connect an A/V device to. The B136-101 and
B136-101-WP-1 are kits that come with units for both the
source and device side.

B136-004
OPTIONAL LOCAL
A/V DEVICE
DVD
B136-100-WP-1
B136-100
5
Extender/Splitter Installation
Notes:
• Test to make sure that the entire installation works properly
before pulling cables through ceilings/walls.
• To achieve the maximum distance of 400 ft. (121 m) at
1080i, Zero-Skew cabling must be used, such as
Tripp Lite P524-01K.
• To achieve extension distance of 300 ft. (91 m) at 1080i,
24 AWG solid-core wire cabling must be used. Tripp Lite
N202-Series (Cat6), N022-01K-GY (Cat5e Bulk) and
N222-01K-GY (Cat6 Bulk) contain 24 AWG solid-core wire.

6
Extender/Splitter Installation
1Make sure the A/V source is powered OFF.
2Connect the source to the ports on the B136-004
labeled SOURCE using Tripp Lite A008-Series
Component Video and A050-Series Stereo
Audio Cables.
3Optional: Connect a local A/V device to the ports
on the B136-004 marked LOCAL using Tripp Lite
A008-Series Component Video and A050-Series
Stereo Audio Cables.
4Connect the external power supply to the
B136-004 local unit and plug it into a Tripp Lite
Surge Protector, PDU or Uninterruptible Power
Supply (UPS). The red LED will illuminate to
indicate power is being received from the external
power supply.
5
Using Cat5e/6 cable, connect one of the RJ45 output
ports on the B136-004 to the RJ45 input port on the
B136-100 or B136-100-WP-1 remote unit.
6Repeat step 5 for each additional remote unit you
are connecting.
7Connect the B136-100 component video and
stereo audio connectors to the A/V device, or
connect the B136-100-WP-1 to the A/V device
using Tripp Lite A008-Series Component Video
and A050-Series Stereo Audio Cables.
8Repeat step 7 for each additional A/V device you
are connecting.
9Turn on the power to the A/V source.

Level 1
Level 2
Level 3
OPTIONAL LOCAL
A/V DEVICE
DVD
7
Extender/Splitter Daisy-Chain Installation
Notes:
• Test to make sure that the entire installation works properly
before pulling cables through ceilings/walls.
• To achieve the maximum distance of 400 ft. (121 m) at
1080i, Zero-Skew cabling must be used, such as
Tripp Lite P524-01K.
• To achieve extension distance of 300 ft. (91 m) at 1080i,
24 AWG solid-core wire cabling must be used. Tripp Lite
N202-Series (Cat6), N022-01K-GY (Cat5e Bulk) and
N222-01K-GY (Cat6 Bulk) contain 24 AWG solid-core wire.

8
1Make sure the A/V source is powered OFF.
2Connect the source to the ports on the first
B136-004 local unit labeled SOURCE using
Tripp Lite A008-Series Component Video and
A050-Series Stereo Audio Cables.
3Using the included 1 ft. component + audio
cable, or Tripp Lite A008-Series Component Video
and A050-Series Stereo Audio Cables, connect
the ports labeled LOCAL on the first B136-004 to
the SOURCE ports on a second B136-004.
4Repeat step 3 if you want to daisy-chain a third
B136-004 local unit.
Note: No more than three local units can be connected.
5Connect the external power supply to the first
B136-004 local unit and plug it into a Tripp Lite
Surge Protector, PDU or Uninterruptible Power
Supply (UPS). The red LED will illuminate to
indicate power is being received from the external
power supply.
6Repeat step 5 for each local unit in the
installation.
7Optional: Connect a local A/V device to the LOCAL
ports on the last B136-004 using Tripp Lite A008-
Series Component Video and A050-Series Stereo
Audio Cables.
8Using Cat5e/6 cable, connect an available RJ45
output port on a B136-004 to the RJ45 input port
on a B136-100 or B136-100-WP-1 remote unit.
Extender/Splitter Daisy-Chain Installation

9
9Repeat step 8 for each additional remote unit you
are connecting.
10 Connect the B136-100 component video and
stereo audio connectors to the A/V device, or
connect the B136-100-WP-1 to the A/V device
using Tripp Lite A008-Series Component Video
and A050-Series Stereo Audio Cables.
11 Repeat step 10 for each additional A/V device you
are connecting.
12 Turn on the power to the A/V source.
Extender/Splitter Daisy-Chain Installation

DVD B136-101
B136-101-WP-1
DVD
10
Extender Kit Installation
Notes:
• Test to make sure that the entire installation works
properly before pulling cables through ceilings/walls.
• To achieve the maximum distance of 400 ft. (121 m) at
1080i, Zero-Skew cabling must be used, such as
Tripp Lite P524-01K.
• To achieve extension distance of 300 ft. (91 m) at 1080i,
24 AWG solid-core wire cabling must be used. Tripp Lite
N202-Series (Cat6), N022-01K-GY (Cat5e Bulk) and
N222-01K-GY (Cat6 Bulk) contain 24 AWG solid-core wire.