Triton ENVI GEENVF17 User manual

User Guide 2181675A- July 2023
www.divapor.com

2
ENVi®Thermostatic Electric Shower - DuElec®Dual Outlet Kit
®®
Welcome toWelcome to
www.divapor.com

3
• All new experience - Intuitive control with full colour digital display
• Get the look - Select from x3 premium nishes to match your
bathroom style
• DuElec® - Seamlessly divert between a luxurious rainfall and 5 spray
pattern shower head
• Personalisation - Create x6 individual time and temperature proles
• Eco conscious - Shower a minute less and save water, save energy
and save money
• User feedback - Water, Energy and Cost data on personal shower
use
• Enhanced control - Tri-Protect®precise thermostatic temperature
operation
• Phased shutdown - reducing unwanted scale build up
• Flexible installation - Tri-HUB can be located in the loft or airing
cupboard
• Replacement installation - discover the ENVi® retrot plate
accessory to cover marks from the previous electric shower
installation. Visit tritonshowers.co.uk/envi for more information
Product InformationProduct Information
www.divapor.com

3
5
6
7
8
9
10
11 - 15
16 - 19
20
20
Product Information
ENVi®Controller Layout
Quick Start
Switching the Shower On
Adjusting the Temperature
ENVi® Mode and User Proles
Switching the Shower O
System Settings
Care and Cleaning
Error Codes
ENVi®Product Support
4
ContentsContents
WARNING
This appliance can be used by children aged from 3years and
above and persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have
been given supervision or instruction concerning use of the
appliance in a safe way and understand the hazards involved.
Children may not play with the appliance. Cleaning and user
maintenance shall not be made by children.
www.divapor.com

The function of each Menu Control adapts to the mode it is used in, and is
denoted on-screen above each control by one of the following icons:
The Menu Controls will be referred to by their icon name throughout this guide
(e.g. Tick control). Touch the corresponding Menu Control to browse the menu.
On-screen icons are not touch controls.
- Up/Down: Navigate items within a menu or sub-menu.
- Left/Right: Navigate User Proles and options within a setting.
- Tick: Conrm a selection within a menu or setting.
- Cross: Reply ‘No’ to an on-screen prompt.
- Back: Return to the previous menu.
- Proles: select User Proles whilst showering.
1
5
Menu Controls
COLD Control ECO Control
Start/Stop
Control
Increase
Showering
Water
Temperature
Display Area
Decrease
Showering
Water
Temperature
ENViENVi®®Controller LayoutController Layout
www.divapor.com

Touch the Start/
Stop icon to start
showering
Touch the or
icons to adjust the
shower temperature
Touch the icon
to run the shower
at ambient water
temperature
Touch the icon to
reduce the shower
timer by one minute
Touch the circular
symbols under and
chevrons to select a User
Prole and touch the circular
symbols under to conrm
Touch the Start/
Stop icon to stop
showering and begin
phased shut down
6
Quick StartQuick Start
www.divapor.com

ECO Mode is great for your bills and for the planet: using it can save the
average household* £85 and 50 kg of CO2e every year!
* based on 4 person household using the 9kW model
Upon connecting ENVi®to the electricity supply, there may be a delay period of a
few seconds whilst the controller connects to the Tri-HUB. The Start/Stop
icon on the controller will illuminate once this is complete, touch it to start
showering. The shower temperature will be set to the Default Showering
Temperature; the shower timer will also start counting down from the Default
Showering Time.
Touch the icon whilst
showering (with more than
two minutes remaining
on the timer) to activate
ECO mode, which reduces
the timer by one minute.
The temperature readout
lls green with ECO mode
active. Touch the icon
again to deactivate ECO
mode and restore one
additional minute to the
timer.
7
The temperature readout will ash whilst the water is warming to the target
temperature. The temperature readout also gradually lls blue, indicating how
much of the timer has elapsed, in addition to the on-screen timer readout.
Switching the Shower OnSwitching the Shower On
www.divapor.com

ENVi® automatically controls the ow and the power setting, ensuring that
the shower runs as eciently as possible, whilst providing the optimal
thermostatic showering experience!
The shower temperature can be digitally adjusted by touching the or
icons, and it can be set between 32°C and 46°C in 1°C increments. ENVi®has
thermostatic temperature control, which means the outlet temperature will
remain constant even if water is being used elsewhere, ensuring reliable
safety and comfort.
To run the shower at ambient
water temperature without
heating, touch the icon.
The shower temperature
on the display is replaced
by a snowake whilst this
setting is active, maximum
ow rate will be delivered,
and the outlet temperature
is not thermostatic. Touch
the icon again to return
to the previously set shower
temperature.
8
Adjusting the TemperatureAdjusting the Temperature
www.divapor.com

ENVi® Mode activates the option of selecting one of six User Proles whilst
showering. Each User Prole can be congured in the System Settings to
personalise shower temperature, duration and more.
Personalising a User Prole is a great way to perfect each showering
experience. Not only is your ideal temperature delivered every time, you can be
sure that your shower doesn’t ever overrun, saving you time and money, whilst
reducing your carbon footprint!
Upon selecting a User Prole, the shower will automatically adjust the shower
temperature and reset the timer to the personalised settings for that User Prole.
The shower temperature can still be manually adjusted by touching the and
controls.
For a simplied showering experience, ENVi®Mode can be deactivated in the
System Settings (pg.12), which hides the prole controls whilst showering.
When switching on the shower, the Default Prole is selected and default
settings are used. Touch the circular symbols under the and chevrons to
browse between the user proles and use the circular symbol under the to
conrm selection.
9
ENViENVi®® Mode & User Proles Mode & User Proles
www.divapor.com

When ending a shower
with a User Prole selected
for the rst time, the
shower displays an option
to navigate to the User
Prole Settings menu for
that User Prole, so that it
can be personalised. Touch
the circular symbols under
the to navigate to the
menu, or touch the circular
symbol under the to
advance to the shut down
screen.
ENVi®will automatically shut down when the timer has elapsed, or if the Start/
Stop icon is touched whilst showering. The shower will begin Phased Shut
Down, which protects the ENVi®Tri-HUB from overheating by purging it of hot
water before turning fully o. The duration of the shower and other usage
statistics from the shower will be displayed. These statistics are allocated to the
active User Prole, if one was selected, and can be viewed in the System Settings.
ENVi® can calculate and display the cost of showering at the end of every
session! This will be enabled so long as Energy and Water Unit Prices are
entered in the System Settings (pg.14).
10
Switching the Shower OSwitching the Shower O
www.divapor.com