Triton Amber 2 User manual

2180456 - November 2019
Amber 2
showerhead
Installers please note these InstructIons are to be left wIth the user

AMBER 2 SHOWERHEAD
INTRODUCTION
Your shower is supplied with a single mode
showerhead, with a rub clean head.
CLEANING
Before cleaning, turn off the unit at the mains
supply to avoid the shower being accidentally
switched on.
IT IS IMPORTANT TO KEEP THE SPRAYHEAD
CLEAN TO MAINTAIN THE PERFORMANCE
OF THE SHOWER. The hardness of the water
will determine the frequency of cleaning. For
example, if the shower is used every day in a
very hard water area, it may be necessary to
clean the showerhead on a weekly basis.
To clean the nozzles simply rub your thumb over
them.
DO NOT use a pin or similar to poke the holes
otherwise the efficiency of the shower spray will
be impaired.
In extreme cases, remove the showerhead and
leave to soak overnight in a mild proprietary
descalent. Make sure all traces of scale are
removed and thoroughly rinse in clean water
afterwards.
Before refitting the showerhead, flush any debris
out of the hose.
SPARES
Showerhead 88500077
Please refer to shower installation and operating instructions for service details. E&OA.