Triton 1 DOOR QUADRANT User manual

1 DOOR QUADRANT

2
6
2
Z190900 870-890
1 DOOR QUADRANT
PRODUCT ADJUSTMENT

OUTSIDE

3
Build the product on the tray starting with the bottom profile
NOTE: The enclosure is shown and fitted as right hand from this point
A. The product is reversible and the handing is determined by the seal length in the bottom profile
e.g. for right hand opening the longest seal should be on the right, shortest seal to the left.
Opposite applies for left hand opening'
B. Slide the wall profile fully over the nylon bracket
C. Load the 4x30 screw onto the tool provided and fix the wall profiles, top, middle and bottom
D. Slide the top frame fully into the ends of the wall profiles. Check the frame is locked in place and
does not slide back out of the frame.
For right hand
opening the longest
seal should be to
right side
Short Seal

D
E
5HPRYHWKH39&LQVWDOODWLRQWRROE\
UHOHDVLQJWKHVLGHFORVHVWto the top
first, then left out from the frame
Slide the clip (12) away from the seal
on the top and bottom of the frame.
12
Leave the bottom PVC installation
tool in place to help with the fitting
of the fixed glass panel.
Note: please ensure the installation
tools are positioned at each end of
the bottom seal

(Shown in right hand

Adjust the rollers to ensure the the overlap of the moving and fixed panels is parallel.