TRONE Aquatina III A3ETBCERN-12.WH User manual

Aquatina III Instruction Manual

TABLE OF CONTENTS
1. Safety precauons ............................................................................... 2
2. Signs and meanings ............................................................................. 2
3. Warnings........................................................................................... 3-6
4. Line drawings
4.1.Remote Control ............................................................................. 7
4.2.Bidet Toilet..................................................................................... 8
5. Automac Funcons............................................................................ 9
6. Getng to know your remote ............................................................ 10
7. Getng to know your lid and seat
7.3. Opening and closing the lid ........................................................ 10
7.4. Opening and closing the seat...................................................... 11
7.5. Adjustable Seat temperature...................................................... 11
7.6. Seng automac lid opening/closing ........................................ 11
8. Getng to know your bidet
8.7. Stop............................................................................................. 12
8.8. Rear Wash................................................................................... 12
8.9. Adjustable Water Pressure ......................................................... 12
8.10. Adjustable Spray Wand Posion............................................... 12
8.11. Adjustable Water Temperature................................................ 12
8.12. Front Wash ............................................................................... 13
8.13. Drying........................................................................................ 13
8.14. Adjustable Drying Temperature ............................................... 13
8.15. Adjustable Fan Posion ........................................................... 13
8.16. Lady Care .................................................................................. 14
8.17. Strong Wash ............................................................................. 14
8.18. One Soluon ............................................................................ 14
8.19. Children Wash ......................................................................... 14
8.20. Eco Mode .................................................................................. 15
9. Getng to know your bowl
9.16. Night Light................................................................................. 15
9.17.Automac Flush ......................................................................... 15
10. Pairing the remote ............................................................................. 15
11. Troubleshoong Guide ...................................................................... 16
12. Cleaning and care .............................................................................. 19
13. Product specificaons........................................................................ 22
1

SAFETY PRECAUTIONS
Basic safety precautions must be followed when handling or using
electrical products, especially those within the reach of children.
Please make yourself aware of the following guidelines:
This product should only be used by children who are 8
years and older or by persons with disabilities who have
received supervision and instructions on the safe use and
the hazards involved when using this product.
It is unwise to allow children to play with this electronic
bidet, supervised or not.
It is not recommended that children who are unsupervised
be allowed to clean and perform maintenance for this
product.
SIGNS AND MEANINGS
Improper operations due to ignorance
of the instructions may result in death
or injury
Improper operations due to ignorance
of the instructions may result in body
injury and property loss
Not allowed
Should be followed
WARNING
CAUTION
FORBIDDEN
MUST
WARNING
CAUTION
FORBIDDEN
MUST
WARNING
CAUTION
FORBIDDEN
MUST
WARNING
CAUTION
FORBIDDEN
MUST
2

WARNINGS
Please do not touch the electrical outlet with wet hands.
Or it may cause electric shock
Please do not pour liquids such as water or detergent
on top of the electronic outlet and the toilet.
Or it may cause fire, electric shock, heat or
short circuit
Or it may cause injury and indoor water
seepage because of the damaged part
Never attempt to disassemble, repair, or alter the
product yourself.
Or it may cause fire, electric shock, heat or
short circuit
Please do not install the toilet in the car, ship, or any
other moving objects.
Or it may cause fire, electric shock, short circuit
or fault
Or the ceramic, seat, and the main part will be
damaged due to fall
Do not use if it is broken. Under the following condition,
please turn off the toilet and the water angle valve.
Water leakage from the pipe or inner parts of
the toilet
Smoke
Unusual heating and smell
Blockage
WARNING
CAUTION
FORBIDDEN
MUST
WARNING
CAUTION
FORBIDDEN
MUST
3

Continuous use of the toilet despite of the damages and
above-mentioned conditions may result to fire, electric
shock, heat, short circuit, injury, and indoor water
seepage.
Please don't use seawater and other water except for
tap water or potable well water (underground water)
Or it may cause skin irritation or inflammation
During thunderstorms, do not touch the electrical plug
Or it may cause electric shock
Please do not let the water inlet soft pipe connect to the
electrical plug and outlet
Or it may cause fire, electric shock, heat, and
short circuit because of moisture condensation
Please do not damage the power cable or plug. Do not
strike, yank, twist, bend excessively, or alter the
electrical cords. Also, do not place anything heavy on,
bind or pinch the cords
Or it may cause fire, electric shock, heat, and
short circuit if it's broken
Please do not use a loose or faulty electrical outlet
Or it may cause fire or short circuit
Please use the electrical outlet and wire appliance in the
specified outlet
Or it may cause fire
Please do not put your finger or anything into the warm
air outlet. Do not cover or put objects or clothes on the
air outlet.
Or it may cause scalding, electric shock, or fire
4

Pay attention to the low temperature scalding
Improper use of warm seat may cause low temperature
scalding
If you sit for a long time, please turn the temperature
setting to "off level. Please turn the seat temperature
setting to "off level, warm air-dry temperature to "low"
level under the following situations
Children and elders or those who cannot adjust
the temperature to the proper level
Persons with disability and patients with
behavioral problems
People who have taken medicines with side
effects of hypnosis (hypnotics, cold meds, etc.),
orthose who are excessively drinking alcohol, too
tired, and with somnolence
This is an electrical product, please do not install it in a
place where it will get wet easily or in areas with high
humidity. If installed in the bath- ram, please install a
ventilator to maintain the bathroom ventilation.
Or it may cause fire or electric shock
The product must be connected to the cold water
supply
Or it may cause body burn or machine fault
Please confirm if the electrical outlet is connected to
the ground.
Or it may cause electric shock because of fault
or short circuit
The outlet for power wire should obey the following
rules or it may cause fire or electric shock.
Please ask the maintenance team or similar
department to replace the power soft wire if it is broken
to avoid danger. Repair work must be done by
professionals.
5
WARNING
CAUTION
FORBIDDEN
MUST
WARNING
CAUTION
FORBIDDEN
MUST

Please do not throw lighted cigarettes and other
flaming material into the toilet.
Or it may cause fire
Do not install this product in a room where it may be
frosted. The room temperature can’t be less than 39.2
degree Fahrenheit.
Don’t block the air outlet
Do not use excessive force when closing the cover and
the seat.
Do not intentionally soil, spray, or block the cleaning
nozzle.
Pull out the plug regularly and clean off the dust with a
dry cotton cloth.
Use the new hose parts that come with the product.
The old ones should not be reused.
Keep the product away from the heater.
Close the water supply valve before taking out the
junction block.
If you need to be away for a long time, be sure to plug
it out, turn off the water, and drain the remaining water
inside the bidet. The remaining water may freeze when
the product is transported over long distances or stored
for a long time in cold winter or alpine region.
6
WARNING
CAUTION
FORBIDDEN
MUST
WARNING
CAUTION
FORBIDDEN
MUST
WARNING
CAUTION
FORBIDDEN
MUST
WARNING
CAUTION
FORBIDDEN
MUST

LINE DRAWINGS
Remote Control
7

Electronic
Power Plug
(Electronic
Leakage
Protecon)
Side Buons
Heated Seat
Toilet Bowl
Cushion Pad
Toilet Lid
Damper
Dryer
Spray Wand
Nozzle
Foot Sensor
Bidet
8

AUTOMATIC FUNCTIONS
Self-Cleaning Wand
The spray wand cleans itself before and aer every use by rinsing itself
as it enters and exits.
Deodorizer
The deodorizer starts anyme the seat sensor has been acvated. The
deodorizer will stop automacally aer a user leaves the seat for
around 90 seconds. You can deacvate the automac deodorizer by
pressing and holding the Dryer/Deodorizer buon [ ] for 3 seconds.
Pre-Rinse
The Pre-Rinse starts anyme the seat sensor has been acvated. A quick
jet of water covers the bowl to help waste slide down.
Automac Flush
The toilet will flush automacally approx. 5 seconds aer leaving the
seat. This seng can be turned on and offby pressing and holding the
Flush/Auto Flush buon [ ].
Automac Opening/Closing
The lid can be set to automacally open when approaching the toilet.
This seng can be turned on and offby pressing and holding the
Open/Set buon [ ].
9

GETTING TO KNOW YOUR REMOTE
Level Indicator Light
•The Level Indicator Light [ ] will display the
current level.
•The water pressure adjustment, spray wand posion
adjustment, and the temperature adjustmentshave
four gear posions: Close, Low, Mid, and High. When
you successfully change from one level to the other
the light indicator changes posion and you hear one
beep. If you hear two beeps you have reached the
maximum or minimum level.
GETTING TO KNOW YOUR LID & SEAT
Opening and Closing the lid
There are four methods to open and close the lid. These methods
include (1) by hand, (2) using the remote, (3) using the foot sensor
and (4) automacally.
•Method 1: Using your hand you can open or close the lid.
Note: Do not interrupt the lid opening or closing
with your hand if it is moving via another method. This
can cause the gears to break.
•Method 2: Press the Open/Set buon [ ] to
open the lid and press the Close/Power Save buon [ ]
to close the lid.
Note: If the seat is also open, it will close the seat
first and you will need to press it again.
•Method 3: When the lid is closed, gently tap the locaon of
the foot sensor. When the lid and seat are open, gently tap
the locaon of the foot sensor and the seat and lid will close.
•Method 4: The lid will automacally open when you are
close to it if the automac lid funcon is acve. The lid will
10

automacally close on its own aer no moon is detected for
approximately 90 seconds.
Note: You can acvate or deacvate this feature.
See instrucons on this feature on page 12.
Opening and Closing the seat
There are four methods to open and close the seat. These methods
include (1) by hand, (2) using the remote, (3) using the foot sensor,
and (4) automacally.
•Method 1: Using your hand you can open or close the seat.
Note: Do not interrupt the lid opening or closing
with your hand if is moving via another method. This
can cause the gears to break.
•Method 2: Press the Open/Set buon [ ] to open
or close the seat.
Note: If the lid is closed, it will open the lid first and
you will need to press it again.
•Method 3: When the seat is closed, gently tap the locaon of
the foot sensor.
•Method 4: The seat will automacally close on its own aer no
moon is detected for approximately 90 seconds.
Adjustable Seat Temperature
•Press the Seat Temp buon [ ] unl the desired seat
temperature is selected. There are three levels of temperature
adjustment which can be seen on the Level Indicator Light (1
light, 3 lights, or 5 lights).
Seng Automac Lid Opening/Closing
Factory Sengs: On
•Press and hold the Open/Set buon [ ] .
•When Automac Lid Opening acvates you hear a long beep.
•When Automac Lid Opening deacvates you hear a short
beep.
11

GETTING TO KNOW YOUR BIDET
Stop
•You can turn the toilet power on and off by pressing and holding
the Stop buon [ ] for approximately 2-3 seconds.
•Press the Stop buon [ ] to immediately end any of the
following funcons: rear wash, front wash, drying, strong &
weak massage, cold & warm massage, children wash, self-
cleaning of nozzle, drying, and live water replacement.
Rear Wash
•When the user is seated, press the Rear Wash buon [ ] to
start rear washing. Press the Rear Wash buon [ ] again to
start the oscillang funcon (indicator level 1 begins flashing).
•Press the Stop buon [ ] to stop Rear Wash.
Note: It will stop cleaning and start the drying
funcon automacally aer connuous cleaning for
about 90 seconds.
Adjustable Water Pressure
•When you are washing, use the Strong and Weak buons [ + - ]
to increase or decrease the water pressure. There are four
levels of adjustment which can be seen on the level display.
Adjustable Spray Wand Posion
•While washing, press the Front or Back buons [ ^ v ]. There
are five levels of adjustment which can be seen on the level
indicator light.
Note: You cannot adjust the wand posion while
using the oscillang feature.
12

Adjustable Water Temperature
•Press the Water Temp buon [ ] unl the desired water
temperature is selected. There are four levels of temperature
adjustment which can be seen on the level indicator light.
Front Wash
•When the user is seated, press the Front Wash buon [ ] to
start front washing. Press the Front Wash buon again to start
the oscillang funcon.
•Press the Stop buon [ ] to stop Feminine Wash.
Note: It will stop cleaning automacally aer about
90 seconds of connuous washing.
Drying
•When the user is seated, press the Dryer/Deodorizer buon
[ ] to start the drying funcon.
•Press the Dryer/Deodorizer buon again to oscillate the dryer.
•Press the Stop buon [ ] to stop drying.
Note: The dryer will stop automacally aer
connuous drying for about 5 minutes.
Adjustable Drying Temperature
•While you are drying, press the Strong or Weak buons [ + - ]
unl the desired air temperature is selected. There are four
levels of temperature adjustment which can be seen on the
level indicator display.
Adjustable Fan posion
•While you are drying, press the Front or Back buons [ ^ v ]
unl the desired posion is selected. There are five levels of
posion adjustment which can be seen on the level indicator
display.
13

Note: You cannot adjust the dryer posion while
using the dryer oscillang feature.
Lady Care
•While in idle mode, press the Lady Care buon [ + ]. Lady care
sets the temperature to the highest seng and water pressure
to level 2. Lady care ends aer cleaning for approx. 2 minutes or
aer pressing the Stop buon [ ].
Note: Idle mode means rear wash, front wash,
dryer, and flushing are not currently being used.
Strong Wash
•While in idle mode, press the Strong Wash buon [ ^ ]. Strong
wash selects the highest level of water pressure and ends
automacally aer approx. 2 minutes of pressing the stop
buon [ ].
Note: Idle mode means rear wash, front wash,
dryer, and flushing are not currently being used.
One Soluon
•While in idle mode, press the One Soluon buon [ v ]. One
soluon starts rear washing for approx. 40 seconds, then
oscillates for approx. 20 seconds, and then warm air dryer for
approx. 2 minutes.
Note: Note: Idle mode means rear wash, front
wash, dryer, and flushing are not currently being used.
Children Wash
•When the user is seated and the toilet in idle mode, press the
Weak/Child wash buon [ ]. Child washing begins and will
automacally stop aer 30 seconds. Child washing presets the
wand posion to maximum, water pressure to minimum, and
the water temperature to warm.
14

Note: Water temperature, water pressure, spray
wand posion selecon, cannot be adjusted when this
funcon starts.
Note: Idle mode means rear wash, front wash,
dryer, and flushing are not currently being used.
Eco Mode
•Press and hold the Close/Power save buon [ ]
to turn on/off the EcoMode. Eco Mode keeps the seat
temperature lower when nobody is on the toilet.
GETTING TO KNOW YOUR BOWL
Night Light
•Press the Night Light buon [ ] to turn on/offthe night light.
Automac Flush
•Press and hold the Flush/Auto Flush buon [ ]
to turn this funcon on/off.
Note: When you flush the toilet with the remote or
side knob while seated, the toilet will not flush again
aer leaving the toilet.
PAIRING THE REMOTE
1) Unplug the bidet.
2) Press and hold the Weak AND Back buttons [ - AND v ] at
the same time until the level indicator lights on the front of the
remote start flashing.
3) Hold the remote close to the toilet and plug it in within 5
seconds.
15

Toilet
Fault
Failure Analysis
Solutions
Unclean flush
when the water
pressure is low
Angle valve filter
blocked
Clean the filter according to
the manual
Too low water
pressure
Measure if the water
volume is 10L per 30s or
not (buy a booster pump)
Bended water inlet
pipe
Ensure that the water
supply line is not kinked
Normal water
pressure but flush
is unclean and has
no siphon
Outlet has air
leakage
Consult a professional
repair man
S-pipe is blocked Use a toilet dredge
Normal water
pressure but flush
is not working
Check if the angle
valve is closed or not
Open the angle valve
Flush valve failure Consult a professional
repair man
Dryer/Fan/Seat Temperature
Fault Failure Analysis Solutions
Drying with
cold air
Check the fan
temperature setting if it’
s
off or low
Adjust the fan temperatur
e
according to the manual
Seat is not
warm enough
Check the seat
temperature setting if it’
s
off or low
Adjust the seat
temperature according to
the manual
16

Power Switch
Fault Failure Analysis Solutions
Product N
ot
Working
Check whether the sock
et
has power or not and if
the plug is loose. Check circuit
C
heck whether the toilet i
s
turned on or not (if the
side button is on or not)
Press the power on/off
button until the side
button’s light is on
Check whether the
leakage protection button
in the plug is on or off by
checking the light of the
leakage protection plug
Pull out the plug and
connect it later. Press the
reset switch of the leakage
protection plug. If it’s still
not working, pull out the
plug and ask a
professional repair man f
or
help.
Remote
Fault Failure Analysis Solutions
Remote not
working
Low battery Replace the old battery
Check if there is any
water inside the remote
Dry the remote with a dry
cotton cloth
17

General Problems
Fault Failure Analysis Solutions
No water coming
out from the
nozzle
Check if there’s no water
supply
Wait for water supply
to be back to normal
Check if the angle valve i
s
closed or not Open the angle valve
Check if the inlet water
filter is blocked or not Clean the water filter
Check if the water inlet
pipe is bended or not
Ensure that the inlet
pipe
Cleaning strength
is not enough
Check if the water
pressure is set to low
Increase the water
pressure using the
remote
Check if inlet filter is
blocked or not Clean the inlet filter
Water temperatur
e
is not warm
enough
Check if the water
temperature is set to low
or not
Adjust the water
temperature according
to the instructions
given in this manual
Spray wand is
always dripping
water
Solenoid valve failure Consult a professional
repair man
Spray wand
cannot be used
Seat body induction
failure
Consult a professional
repair man
18

CLEANING AND CARE
Note: Turn off the power, close the water supply angle valve, and
stop the water supply before doing any maintenance work. DO
NOT rinse this product with water during maintenance.
Toilet Bowl Cleaning
Please ensure that the electrical plug is taken out.
Please use soft damp cloth to wipe the toilet shelf and
seat. The dirt should be easily removed. If it's not, you
may use neutral detergent.
Self-Cleaning Nozzle Maintenance
Press the Nozzle Clean button [ ]. The spray wand
will then extend.
Wash the cleaning tube and nozzle with a toothbrush
coated with toothpaste.
Do not use excessive force. Press the Stop [ ] button
to take the nozzle tube back once you’re done cleaning.
19