Turtle Beach Ear Force X-Ray User manual

Copyright © 2012 Voyetra Turtle Beach, Inc. (VTB, Inc.) All rights reserved. No part of this package may be reproduced without permission. Turtle Beach, the Turtle Beach Logo, Voyetra, Ear
Force, and Engineered for Gaming are either trademarks or registered trademarks of VTB, Inc. All other trademarks are properties of their respective companies and are hereby acknowledged.
PlayStation is registered trademark and PS3 is a trademark of Sony Computer Entertainment. Xbox, Xbox 360, and Xbox LIVE are registered trademarks of Microsoft Corporation. Dolby and the
double-D symbol are trademarks of Dolby Laboratories. Made in China
© 2012 Activision Publishing, Inc. ACTIVISION, CALL OF DUTY, CALL OF DUTY BLACK OPS and stylized roman numeral II are trademarks of Activision Publishing, Inc.
This product is compliant with the Consumer Product Safety
Improvement Act of 2008, Public Law 110-314 (CPSIA) N30375
TurtleBeach.com /support
product support and warranty information:
youtube.com /TurtleBeachVideos
Watch Turtle Beach product training videos at:
FOR / POUR
XBOX 360
®
|PS3™

User Guide
LIMITED EDITION

Table of Contents
Package Contents 2
Feature / Function Map 3
Setting Up 5
Using the Transmitter / Pairing Instructions 6
Using your X-Ray Headset on XBOX 360 7
Using your X-Ray Headset on PS3 9
Bluetooth Settings 10
Surround Sound Settings 11
Phone Settings 13
Recharging 14
Specications 15
Compliance / Conformity 16
Warranty 20

Congratulations on your purchase of the Call of Duty®: Black OPS II Earforce X-Ray headset from
Turtle Beach. You now have in your possession a premium product that will bring your gaming
experience to a whole new level, heightening your senses, sharpening your reexes and
enhancing your communications. Welcome to excellence!

T
U
R
T
L
E
B
E
A
C
H
.
C
O
M
Turtle Beach Sticker
X-Ray Headset
2
Package Contents
Quick Start Guide
Quick Start Guide
For the full user guide, please go to http://www.turtlebeach.com/products/X-Ray
Package Contents |Contenu de la boîte
FOR / POUR
XBOX 360
®
|PS3™
X-Ray Headset
Casque X-Ray
D
D
X-Ray Transmitter
Émetteur X-Ray
T
U
R
T
L E
B
E
A
C
H
.
C
O
M
TurtleBeach Sticker
Vignette TurtleBeach
Digital Optical Cable
Câble optique numérique
Headset Charging Cable
Câble casque Charge
XBOX 360 TalkbackCable
XBOX 360 câble Discussion
Digital Optical CableHeadset Charging Cable
D
X-Ray Transmitter
XBOX 360 Talkback Cable

3
Feature / Function Map (Location of controls / inputs)
1. Tone
2. Power / Pair
3. Limiter
4. Mic Monitor Control
5. XBOX Talkback Cable Jack
6. Game Volume Control
7. Bluetooth Volume Control +
8. Bluetooth Volume Control -
9. Bluetooth LED
10. Bluetooth Multi Function Button / Pair
11. Mic. Mute
12. Charge Status LED
13. USB Jack
1
7 8 10 11 12 13
9
5 6
2 3 4
Headset
Left Earcup
Right Earcup

1. Digital Input LED
2. Surround Sound LED
3. Dolby Digital LED
4. Power Indicator LED
5. Pair Button
6. Surround Angles Button
7. Surround ON / OFF Button
8. DC Connection (Hardwired)
9. SPDIF IN / OUT Jacks
10. Analog In
X-Ray Transmitter
4
Feature / Function Map (Location of controls / inputs)
1
5
234
D
D
PAIR SURROUND
ANGLES SURROUND ON/ OFF
6 7
8 9 10

5
Setting Up
1. Connect digital optical cable (DIGITAL IN) and transmitter
power cables (included) to game console.
NOTE: Remove the protective caps from each end of the
optical cable before inserting it into the sockets.
2. Connect to power.
1. Connect the Digital Optical Cable(DIGITAL IN)
*(Requires XBOX 360 HDMI Audio Adapter, sold separately)
2. Connect to power.
Xbox 360 (Slim) and PS3 Xbox 360 (Older Models)*
2
1
Digital Optical Cable
(included)
Xbox 360
Audio Adapter Cable*
(sold separately)
Transmitter USB Cable
2
D
D
1
DIGITAL OUT
CONSOLE
Digital Optical Cable
(included)
Transmitter USB Cable

1. Headset and transmitter should be powered OFF and at least 2 feet away from each other.
2. Connect the transmitter to power (see previous page for instructions)
3. Press and hold the Pairing button on the transmitter for 5 seconds until the LED ashes rapidly. Release.
4. Press and hold Power button (approximately 6 seconds) on the headset until the LED ashes rapidly. Release.
5. Once your Turtle Beach X-Ray headset has been successfully paired, the Headset LED will blink once per second and the
transmitter Power LED will light solid.
Pairing Instructions
6
Using the Transmitter / Pairing Instructions
The transmitter allows wireless exibility without the restrictions of cables when using your Turtle Beach X-Ray headset. This wireless
communication is through Dual Band WiFi transmitting a signal between the transmitter and your headset from up to 30 ft. If you are
beyond this range or there are obstructions to the signal, you may hear a popping or clicking sound as the signal weakens and is
eventually lost.
For optimal performance, place the transmitter in an open area free from interference from other objects that may otherwise obstruct
the WiFi signal. Avoid placement on a metallic surface such as a home theater A/V receiver as this may cause interference or a weak
signal.
In order for your Turtle Beach X-Ray headset to use the WiFi signal, they need to be “paired” with the transmitter. Follow the pairing
instructions below, keeping the headset and transmitter at least two feet apart while doing so. The headset and transmitter are
pre-paired out of the box. The instructions below are only necessary if pre-pairing appears to have been lost.*
*The pairing process can take up to 30 seconds to complete. If pairing is unsuccessful on rst attempt, please try again. It may take as
many as ve attempts to pair successfully.
PAIR SURROUND
ANGLES SURROUND ON/ OFF
3
4

7
Using your X-Ray Headset on XBOX 360
Your Turtle Beach X-Ray headset is designed to work with XBOX 360 game consoles. In order to get ideal functionality from your
headset, follow the directions below.
Select Back
Digital Output
Current Setting
Dolby Digital
Choose the digital output
type for your system.
This setting only applies
to optical digital and HDMI
audio outputs.
Digital Stereo
Dolby Digital 5.1
Dolby Digital 5.1 with WMA Pro
1. Go to XBOX Settings.
• Choose “Settings”
• Choose “System Settings”
• Choose “Console Settings”
• Choose “Audio”
• Choose “Accessory Settings”
• Choose “Audio Device Settings”
• Set “Digital Output” to“Dolby Digital 5.1.”
Voice Volume 10
Voice
Mute Kinect
Voice Output
Play Through Headset
Play Through Speakers
Play Through Both
Game Volume 10
2. Go back to XBOX Settings
3. Power X-Ray ON:
• Choose “Preferences.”
• Choose “Voice.”
• Under “Voice Output,”choose“Play Through Headset.”