Tuttnauer 5596 SP-1 User manual

Artisan Technology Group is your source for quality
new and certied-used/pre-owned equipment
• FAST SHIPPING AND
DELIVERY
• TENS OF THOUSANDS OF
IN-STOCK ITEMS
• EQUIPMENT DEMOS
• HUNDREDS OF
MANUFACTURERS
SUPPORTED
• LEASING/MONTHLY
RENTALS
• ITAR CERTIFIED
SECURE ASSET SOLUTIONS
SERVICE CENTER REPAIRS
Experienced engineers and technicians on staff
at our full-service, in-house repair center
WE BUY USED EQUIPMENT
Sell your excess, underutilized, and idle used equipment
We also offer credit for buy-backs and trade-ins
www.artisantg.com/WeBuyEquipment
REMOTE INSPECTION
Remotely inspect equipment before purchasing with
our interactive website at www.instraview.com
LOOKING FOR MORE INFORMATION?
Visit us on the web at www.artisantg.com for more
information on price quotations, drivers, technical
specications, manuals, and documentation
Contact us: (888) 88-SOURCE | [e-mail] | www.artisantg.com
SM
View
Instra

OPERATION
and
MAINTENANCE
MANUAL
Prevacuum Steam Heated Autoclave
and Manual Hinged Door
Model 5596 SP-1
S/N. 2307085
Cat. No. MAN205-0076- 036E Rev A
Manufactured by:  Tuttnauer Co. Ltd., P.O.Box 35292, Jerusalem, Israel  Tel: [phone],  Fax: [phone]
Authorized Representative:
 Tuttnauer U.S.A. Co., 25 Power Drive Hauppauge,NY,11788,USA,  Tel:[phone], ¬ Fax:[phone]
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Table of Contents
Incoming Inspection ----------------------------------------------------------------- 1
1. General Information
1.1 Introduction ---------------------------------------------------------------------- 2-3
1.2 Standards --------------------------------------------------------------------------- 4
1.3 Specifications ----------------------------------------------------------------------- 4
2. Functional Description
2.1 The Piping System ---------------------------------------------------------------- 5
2.2 The Pneumatic Control System ----------------------------------------------- 6
2.3 The Electric System -------------------------------------------------------------- 8
2.3.1 The Control System --------------------------------------------------9 -10
2.4 Water Quality ---------------------------------------------------------------- 11 -12
3. Sterilization Programs
3.1 Programs Description ---------------------------------------------------- 13 - 32
4. Control and Monitoring
♦Control Panel 'CAT 2007' ------------------------------------------------------- 33
4.1 Description of panel 'CAT 2007'----------------------------------------- 34- 35
4.1.2 Display --------------------------------------------------------------- 36 - 37
4.2 Description of Displayed Messages and Safety Measures ----- 38 - 39
4.2.1 Informative messages ---------------------------------------------------- 39
4.3 Operating the Control Panel
4.3.1 Starting up the system ------------------------------------------------- 40
4.3.2 Selecting a Cycle -------------------------------------------------- 41 - 42
4.3.3 System Set-up ----------------------------------------------------- 43 - 45
4.3.4 Changing cycle parameters ------------------------------------ 46 - 50
4.3.5 Display function ---------------------------------------------------------- 51
4.3.6 Display during a cycle -------------------------------------------- 52 - 53
5. Calibration ---------------------------------------------------------------------------- 54
5.1 Calibrating temperature and pressure ------------------------------- 55 - 57
6. Preparation before Sterilization ------------------------------------------ 58 - 59
♦Loading and Unloading ------------------------------------------------- 59 - 60
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Table of Contents
7. Installation Instructions ------------------------------------------------- 61 - 63
8. Operating Instructions -------------------------------------------------------- 64
9. Printer
9.1 Printer Operation ---------------------------------------------------------- 65 - 66
9.2 Printer Handling ----------------------------------------------------------------- 67
10. Maintenance of the Autoclave
10.1 Preventive and Periodical Maintenance --------------------------------- 68
SERVICE INSTRUCTIONS
10.2 Safety Tests after Repair----------------------------------------------------- 70
10.3 Troubleshooting ----------------------------------------------------------71 – 74
10.4 Absolute Pressure Transducer --------------------------------------------- 75
10.5 Dismantling The Cabinet's Sides panels --------------------------------- 76
10.6 Details of the Locking Mechanism ----------------------------------------- 77
11. Spare Parts ---------------------------------------------------------------- 78 - 79
12. Valves Numbering ------------------------------------------------------- 80 - 81
13. Pressure and Temperature Table for Saturated Steam------ 82 - 85
Drawings
♦Pneumatic Control System Drawing-------------------------------------------- 7
♦Piping drawing -------------------------------------------------------------------- 86
♦Electric drawing-------------------------------------------------------------------- 87
XPCS Manual ------------------------------------------------------------------88 - 101
♦Steps for modem connection--------------------------------------------------101
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com